All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Simon Horman <horms@verge.net.au>,
	Rob Herring <robh+dt@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/5] arm64: dts: renesas: r8a77980: add DU support
Date: Wed, 6 Jun 2018 19:56:11 +0300	[thread overview]
Message-ID: <6ccb3998-f964-5e19-53dd-f567e4ed05bf@cogentembedded.com> (raw)
In-Reply-To: <4fbd0895-c1ec-41fc-912d-8306dd933997@cogentembedded.com>

Define the generic R8A77980 part of the DU device node.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm64/boot/dts/renesas/r8a77980.dtsi |   30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -671,6 +671,36 @@
 			resets = <&cpg 603>;
 		};
 
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77980",
+				     "renesas,du-r8a77970";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 724>;
+			vsps = <&vspd0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+					};
+				};
+			};
+		};
+
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;

WARNING: multiple messages have this Message-ID (diff)
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Simon Horman <horms@verge.net.au>,
	Rob Herring <robh+dt@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org
Cc: Magnus Damm <magnus.damm@gmail.com>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/5] arm64: dts: renesas: r8a77980: add DU support
Date: Wed, 6 Jun 2018 19:56:11 +0300	[thread overview]
Message-ID: <6ccb3998-f964-5e19-53dd-f567e4ed05bf@cogentembedded.com> (raw)
In-Reply-To: <4fbd0895-c1ec-41fc-912d-8306dd933997@cogentembedded.com>

Define the generic R8A77980 part of the DU device node.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm64/boot/dts/renesas/r8a77980.dtsi |   30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -671,6 +671,36 @@
 			resets = <&cpg 603>;
 		};
 
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77980",
+				     "renesas,du-r8a77970";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 724>;
+			vsps = <&vspd0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+					};
+				};
+			};
+		};
+
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;

WARNING: multiple messages have this Message-ID (diff)
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/5] arm64: dts: renesas: r8a77980: add DU support
Date: Wed, 6 Jun 2018 19:56:11 +0300	[thread overview]
Message-ID: <6ccb3998-f964-5e19-53dd-f567e4ed05bf@cogentembedded.com> (raw)
In-Reply-To: <4fbd0895-c1ec-41fc-912d-8306dd933997@cogentembedded.com>

Define the generic R8A77980 part of the DU device node.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
 arch/arm64/boot/dts/renesas/r8a77980.dtsi |   30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -671,6 +671,36 @@
 			resets = <&cpg 603>;
 		};
 
+		du: display at feb00000 {
+			compatible = "renesas,du-r8a77980",
+				     "renesas,du-r8a77970";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 724>;
+			vsps = <&vspd0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+					};
+				};
+			};
+		};
+
 		prr: chipid at fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;

  parent reply	other threads:[~2018-06-06 16:56 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-06 16:53 [PATCH 0/5] Add R8A77980/Condor LVDS/HDMI support Sergei Shtylyov
2018-06-06 16:53 ` Sergei Shtylyov
2018-06-06 16:53 ` Sergei Shtylyov
2018-06-06 16:54 ` [PATCH 1/5] arm64: dts: renesas: r8a77980: add FCPVD support Sergei Shtylyov
2018-06-06 16:54   ` Sergei Shtylyov
2018-06-06 16:54   ` Sergei Shtylyov
2018-06-06 16:55 ` [PATCH 2/5] arm64: dts: renesas: r8a77980: add VSPD support Sergei Shtylyov
2018-06-06 16:55   ` Sergei Shtylyov
2018-06-06 16:55   ` Sergei Shtylyov
2018-06-06 16:56 ` Sergei Shtylyov [this message]
2018-06-06 16:56   ` [PATCH 3/5] arm64: dts: renesas: r8a77980: add DU support Sergei Shtylyov
2018-06-06 16:56   ` Sergei Shtylyov
2018-06-06 16:57 ` [PATCH 4/5] arm64: dts: renesas: r8a77980: add LVDS support Sergei Shtylyov
2018-06-06 16:57   ` Sergei Shtylyov
2018-06-06 16:57   ` Sergei Shtylyov
2018-06-06 16:59 ` [PATCH 5/5] arm64: dts: renesas: condor: add DU/LVDS/HDMI support Sergei Shtylyov
2018-06-06 16:59   ` Sergei Shtylyov
2018-06-06 16:59   ` Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6ccb3998-f964-5e19-53dd-f567e4ed05bf@cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=horms@verge.net.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.