From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com>, Fabrizio Castro <fabrizio.castro.jz@renesas.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH] ARM: dts: iwg20d-q7-common: Fix backlight pwm specifier Date: Tue, 23 May 2023 17:35:16 +0200 [thread overview] Message-ID: <6e5c3167424a43faf8c1fa68d9667b3d87dc86d8.1684855911.git.geert+renesas@glider.be> (raw) make dtbs_check: arch/arm/boot/dts/renesas/r8a7743-iwg20d-q7.dtb: backlight: pwms: [[58, 0, 5000000], [0]] is too long From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml arch/arm/boot/dts/renesas/r8a7743-iwg20d-q7-dbcm-ca.dtb: backlight: pwms: [[67, 0, 5000000], [0]] is too long From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml arch/arm/boot/dts/renesas/r8a7744-iwg20d-q7-dbcm-ca.dtb: backlight: pwms: [[67, 0, 5000000], [0]] is too long From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml arch/arm/boot/dts/renesas/r8a7744-iwg20d-q7.dtb: backlight: pwms: [[58, 0, 5000000], [0]] is too long From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml PWM specifiers referring to R-Car PWM Timer Controllers should contain only two cells. Fix this by dropping the bogus third cell. Fixes: 6f89dd9e9325d05b ("ARM: dts: iwg20d-q7-common: Add LCD support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- Presumably copied from a board using the TPU, which uses 3 cells. To be queued in renesas-devel-for-v6.5. --- arch/arm/boot/dts/iwg20d-q7-common.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index 03caea6fc6ffa4cf..4351c5a02fa596de 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -49,7 +49,7 @@ audio_clock: audio_clock { lcd_backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm3 0 5000000 0>; + pwms = <&pwm3 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com>, Fabrizio Castro <fabrizio.castro.jz@renesas.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH] ARM: dts: iwg20d-q7-common: Fix backlight pwm specifier Date: Tue, 23 May 2023 17:35:16 +0200 [thread overview] Message-ID: <6e5c3167424a43faf8c1fa68d9667b3d87dc86d8.1684855911.git.geert+renesas@glider.be> (raw) make dtbs_check: arch/arm/boot/dts/renesas/r8a7743-iwg20d-q7.dtb: backlight: pwms: [[58, 0, 5000000], [0]] is too long From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml arch/arm/boot/dts/renesas/r8a7743-iwg20d-q7-dbcm-ca.dtb: backlight: pwms: [[67, 0, 5000000], [0]] is too long From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml arch/arm/boot/dts/renesas/r8a7744-iwg20d-q7-dbcm-ca.dtb: backlight: pwms: [[67, 0, 5000000], [0]] is too long From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml arch/arm/boot/dts/renesas/r8a7744-iwg20d-q7.dtb: backlight: pwms: [[58, 0, 5000000], [0]] is too long From schema: Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml PWM specifiers referring to R-Car PWM Timer Controllers should contain only two cells. Fix this by dropping the bogus third cell. Fixes: 6f89dd9e9325d05b ("ARM: dts: iwg20d-q7-common: Add LCD support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- Presumably copied from a board using the TPU, which uses 3 cells. To be queued in renesas-devel-for-v6.5. --- arch/arm/boot/dts/iwg20d-q7-common.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index 03caea6fc6ffa4cf..4351c5a02fa596de 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -49,7 +49,7 @@ audio_clock: audio_clock { lcd_backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm3 0 5000000 0>; + pwms = <&pwm3 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; enable-gpios = <&gpio5 14 GPIO_ACTIVE_HIGH>; -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-05-23 15:36 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-05-23 15:35 Geert Uytterhoeven [this message] 2023-05-23 15:35 ` [PATCH] ARM: dts: iwg20d-q7-common: Fix backlight pwm specifier Geert Uytterhoeven
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=6e5c3167424a43faf8c1fa68d9667b3d87dc86d8.1684855911.git.geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=fabrizio.castro.jz@renesas.com \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.