From: Viresh Kumar <viresh.kumar@linaro.org> To: arm@kernel.org, olof@lixom.net, arnd@arndb.de Cc: Viresh Kumar <viresh.kumar@linaro.org>, devicetree-discuss@lists.ozlabs.org, spear-devel@list.st.com, sr@denx.de, linux-arm-kernel@lists.infradead.org Subject: [PATCH 14/14] ARM: SPEAr320: DT: Add SPEAr 320 HMI board support Date: Sun, 11 Nov 2012 10:09:36 +0530 [thread overview] Message-ID: <772a8c2f5edc2a342219c8cc0d6bec8daa70eb90.1352608333.git.viresh.kumar@linaro.org> (raw) In-Reply-To: <cover.1352608333.git.viresh.kumar@linaro.org> In-Reply-To: <cover.1352608333.git.viresh.kumar@linaro.org> From: Shiraz Hashim <shiraz.hashim@st.com> This adds support for SPEAr320-HMI board. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/spear320-hmi.dts | 305 +++++++++++++++++++++++++++++++++++++ arch/arm/mach-spear3xx/spear320.c | 1 + 3 files changed, 308 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/spear320-hmi.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b994045..c3295b2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -84,7 +84,8 @@ dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ spear1340-evb.dtb dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear310-evb.dtb \ - spear320-evb.dtb + spear320-evb.dtb \ + spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts new file mode 100644 index 0000000..3075d2d --- /dev/null +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -0,0 +1,305 @@ +/* + * DTS file for SPEAr320 Evaluation Baord + * + * Copyright 2012 Shiraz Hashim <shiraz.hashim@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear320.dtsi" + +/ { + model = "ST SPEAr320 HMI Board"; + compatible = "st,spear320-hmi", "st,spear320"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + pinmux@b3000000 { + st,pinmux-mode = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + i2c0 { + st,pins = "i2c0_grp"; + st,function = "i2c0"; + }; + ssp0 { + st,pins = "ssp0_grp"; + st,function = "ssp0"; + }; + uart0 { + st,pins = "uart0_grp"; + st,function = "uart0"; + }; + clcd { + st,pins = "clcd_grp"; + st,function = "clcd"; + }; + fsmc { + st,pins = "fsmc_8bit_grp"; + st,function = "fsmc"; + }; + sdhci { + st,pins = "sdhci_cd_12_grp"; + st,function = "sdhci"; + }; + i2s { + st,pins = "i2s_grp"; + st,function = "i2s"; + }; + uart1 { + st,pins = "uart1_grp"; + st,function = "uart1"; + }; + uart2 { + st,pins = "uart2_grp"; + st,function = "uart2"; + }; + can0 { + st,pins = "can0_grp"; + st,function = "can0"; + }; + can1 { + st,pins = "can1_grp"; + st,function = "can1"; + }; + mii0_1 { + st,pins = "rmii0_1_grp"; + st,function = "mii0_1"; + }; + pwm0_1 { + st,pins = "pwm0_1_pin_37_38_grp"; + st,function = "pwm0_1"; + }; + pwm2 { + st,pins = "pwm2_pin_34_grp"; + st,function = "pwm2"; + }; + }; + }; + + clcd@90000000 { + status = "okay"; + }; + + dma@fc400000 { + status = "okay"; + }; + + ehci@e1800000 { + status = "okay"; + }; + + fsmc: flash@4c000000 { + status = "okay"; + + partition@0 { + label = "xloader"; + reg = <0x0 0x80000>; + }; + partition@80000 { + label = "u-boot"; + reg = <0x80000 0x140000>; + }; + partition@1C0000 { + label = "environment"; + reg = <0x1C0000 0x40000>; + }; + partition@200000 { + label = "dtb"; + reg = <0x200000 0x40000>; + }; + partition@240000 { + label = "linux"; + reg = <0x240000 0xC00000>; + }; + partition@E40000 { + label = "rootfs"; + reg = <0xE40000 0x0>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "user button 1"; + linux,code = <0x100>; + gpios = <&stmpegpio 3 0x4>; + debounce-interval = <20>; + gpio-key,wakeup = <1>; + }; + + button@2 { + label = "user button 2"; + linux,code = <0x200>; + gpios = <&stmpegpio 2 0x4>; + debounce-interval = <20>; + gpio-key,wakeup = <1>; + }; + }; + + ohci@e1900000 { + status = "okay"; + }; + + ohci@e2100000 { + status = "okay"; + }; + + pwm: pwm@a8000000 { + status = "okay"; + }; + + sdhci@70000000 { + power-gpio = <&gpiopinctrl 50 1>; + power_always_enb; + status = "okay"; + }; + + smi: flash@fc000000 { + status = "okay"; + clock-rate=<50000000>; + + flash@f8000000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xf8000000 0x800000>; + st,smi-fast-mode; + + partition@0 { + label = "xloader"; + reg = <0x0 0x10000>; + }; + partition@10000 { + label = "u-boot"; + reg = <0x10000 0x50000>; + }; + partition@60000 { + label = "environment"; + reg = <0x60000 0x10000>; + }; + partition@70000 { + label = "dtb"; + reg = <0x70000 0x10000>; + }; + partition@80000 { + label = "linux"; + reg = <0x80000 0x310000>; + }; + partition@390000 { + label = "rootfs"; + reg = <0x390000 0x0>; + }; + }; + }; + + spi0: spi@d0100000 { + status = "okay"; + }; + + spi1: spi@a5000000 { + status = "okay"; + }; + + spi2: spi@a6000000 { + status = "okay"; + }; + + usbd@e1100000 { + status = "okay"; + }; + + apb { + gpio0: gpio@fc980000 { + status = "okay"; + }; + + gpio@b3000000 { + status = "okay"; + }; + + i2c0: i2c@d0180000 { + status = "okay"; + + stmpe811@41 { + compatible = "st,stmpe811"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + irq-over-gpio; + irq-gpios = <&gpiopinctrl 29 0x4>; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpegpio: stmpe-gpio { + compatible = "stmpe,gpio"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + gpio,norequest-mask = <0xF3>; + }; + + stmpe610-ts { + compatible = "stmpe,ts"; + reg = <0>; + ts,sample-time = <4>; + ts,mod-12b = <1>; + ts,ref-sel = <0>; + ts,adc-freq = <1>; + ts,ave-ctrl = <1>; + ts,touch-det-delay = <3>; + ts,settling = <4>; + ts,fraction-z = <7>; + ts,i-drive = <1>; + }; + }; + }; + + i2c1: i2c@a7000000 { + status = "okay"; + }; + + rtc@fc900000 { + status = "okay"; + }; + + serial@d0000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + }; + + serial@a3000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + }; + + serial@a4000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + }; + + wdt@fc880000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 707504b..66e3a0c 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -247,6 +247,7 @@ static void __init spear320_dt_init(void) static const char * const spear320_dt_board_compat[] = { "st,spear320", "st,spear320-evb", + "st,spear320-hmi", NULL, }; -- 1.7.12.rc2.18.g61b472e
WARNING: multiple messages have this Message-ID (diff)
From: viresh.kumar@linaro.org (Viresh Kumar) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 14/14] ARM: SPEAr320: DT: Add SPEAr 320 HMI board support Date: Sun, 11 Nov 2012 10:09:36 +0530 [thread overview] Message-ID: <772a8c2f5edc2a342219c8cc0d6bec8daa70eb90.1352608333.git.viresh.kumar@linaro.org> (raw) In-Reply-To: <cover.1352608333.git.viresh.kumar@linaro.org> From: Shiraz Hashim <shiraz.hashim@st.com> This adds support for SPEAr320-HMI board. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/spear320-hmi.dts | 305 +++++++++++++++++++++++++++++++++++++ arch/arm/mach-spear3xx/spear320.c | 1 + 3 files changed, 308 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/spear320-hmi.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b994045..c3295b2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -84,7 +84,8 @@ dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ spear1340-evb.dtb dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear310-evb.dtb \ - spear320-evb.dtb + spear320-evb.dtb \ + spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts new file mode 100644 index 0000000..3075d2d --- /dev/null +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -0,0 +1,305 @@ +/* + * DTS file for SPEAr320 Evaluation Baord + * + * Copyright 2012 Shiraz Hashim <shiraz.hashim@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear320.dtsi" + +/ { + model = "ST SPEAr320 HMI Board"; + compatible = "st,spear320-hmi", "st,spear320"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + pinmux at b3000000 { + st,pinmux-mode = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + i2c0 { + st,pins = "i2c0_grp"; + st,function = "i2c0"; + }; + ssp0 { + st,pins = "ssp0_grp"; + st,function = "ssp0"; + }; + uart0 { + st,pins = "uart0_grp"; + st,function = "uart0"; + }; + clcd { + st,pins = "clcd_grp"; + st,function = "clcd"; + }; + fsmc { + st,pins = "fsmc_8bit_grp"; + st,function = "fsmc"; + }; + sdhci { + st,pins = "sdhci_cd_12_grp"; + st,function = "sdhci"; + }; + i2s { + st,pins = "i2s_grp"; + st,function = "i2s"; + }; + uart1 { + st,pins = "uart1_grp"; + st,function = "uart1"; + }; + uart2 { + st,pins = "uart2_grp"; + st,function = "uart2"; + }; + can0 { + st,pins = "can0_grp"; + st,function = "can0"; + }; + can1 { + st,pins = "can1_grp"; + st,function = "can1"; + }; + mii0_1 { + st,pins = "rmii0_1_grp"; + st,function = "mii0_1"; + }; + pwm0_1 { + st,pins = "pwm0_1_pin_37_38_grp"; + st,function = "pwm0_1"; + }; + pwm2 { + st,pins = "pwm2_pin_34_grp"; + st,function = "pwm2"; + }; + }; + }; + + clcd at 90000000 { + status = "okay"; + }; + + dma at fc400000 { + status = "okay"; + }; + + ehci at e1800000 { + status = "okay"; + }; + + fsmc: flash at 4c000000 { + status = "okay"; + + partition at 0 { + label = "xloader"; + reg = <0x0 0x80000>; + }; + partition at 80000 { + label = "u-boot"; + reg = <0x80000 0x140000>; + }; + partition at 1C0000 { + label = "environment"; + reg = <0x1C0000 0x40000>; + }; + partition at 200000 { + label = "dtb"; + reg = <0x200000 0x40000>; + }; + partition at 240000 { + label = "linux"; + reg = <0x240000 0xC00000>; + }; + partition at E40000 { + label = "rootfs"; + reg = <0xE40000 0x0>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button at 1 { + label = "user button 1"; + linux,code = <0x100>; + gpios = <&stmpegpio 3 0x4>; + debounce-interval = <20>; + gpio-key,wakeup = <1>; + }; + + button at 2 { + label = "user button 2"; + linux,code = <0x200>; + gpios = <&stmpegpio 2 0x4>; + debounce-interval = <20>; + gpio-key,wakeup = <1>; + }; + }; + + ohci at e1900000 { + status = "okay"; + }; + + ohci at e2100000 { + status = "okay"; + }; + + pwm: pwm at a8000000 { + status = "okay"; + }; + + sdhci at 70000000 { + power-gpio = <&gpiopinctrl 50 1>; + power_always_enb; + status = "okay"; + }; + + smi: flash at fc000000 { + status = "okay"; + clock-rate=<50000000>; + + flash at f8000000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xf8000000 0x800000>; + st,smi-fast-mode; + + partition at 0 { + label = "xloader"; + reg = <0x0 0x10000>; + }; + partition at 10000 { + label = "u-boot"; + reg = <0x10000 0x50000>; + }; + partition at 60000 { + label = "environment"; + reg = <0x60000 0x10000>; + }; + partition at 70000 { + label = "dtb"; + reg = <0x70000 0x10000>; + }; + partition at 80000 { + label = "linux"; + reg = <0x80000 0x310000>; + }; + partition at 390000 { + label = "rootfs"; + reg = <0x390000 0x0>; + }; + }; + }; + + spi0: spi at d0100000 { + status = "okay"; + }; + + spi1: spi at a5000000 { + status = "okay"; + }; + + spi2: spi at a6000000 { + status = "okay"; + }; + + usbd at e1100000 { + status = "okay"; + }; + + apb { + gpio0: gpio at fc980000 { + status = "okay"; + }; + + gpio at b3000000 { + status = "okay"; + }; + + i2c0: i2c at d0180000 { + status = "okay"; + + stmpe811 at 41 { + compatible = "st,stmpe811"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + irq-over-gpio; + irq-gpios = <&gpiopinctrl 29 0x4>; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpegpio: stmpe-gpio { + compatible = "stmpe,gpio"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + gpio,norequest-mask = <0xF3>; + }; + + stmpe610-ts { + compatible = "stmpe,ts"; + reg = <0>; + ts,sample-time = <4>; + ts,mod-12b = <1>; + ts,ref-sel = <0>; + ts,adc-freq = <1>; + ts,ave-ctrl = <1>; + ts,touch-det-delay = <3>; + ts,settling = <4>; + ts,fraction-z = <7>; + ts,i-drive = <1>; + }; + }; + }; + + i2c1: i2c at a7000000 { + status = "okay"; + }; + + rtc at fc900000 { + status = "okay"; + }; + + serial at d0000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + }; + + serial at a3000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + }; + + serial at a4000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + }; + + wdt at fc880000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 707504b..66e3a0c 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -247,6 +247,7 @@ static void __init spear320_dt_init(void) static const char * const spear320_dt_board_compat[] = { "st,spear320", "st,spear320-evb", + "st,spear320-hmi", NULL, }; -- 1.7.12.rc2.18.g61b472e
next prev parent reply other threads:[~2012-11-11 4:39 UTC|newest] Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-11-11 4:39 [PATCH 00/14] ARM: SPEAr: DT updates Viresh Kumar 2012-11-11 4:39 ` Viresh Kumar 2012-11-11 4:39 ` [PATCH 01/14] pinctrl: SPEAr: add spi chipselect control driver Viresh Kumar 2012-11-11 4:39 ` Viresh Kumar [not found] ` <4a92290e8a3b1a19c3a5e864edfa7badfc2af5d0.1352608333.git.viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2012-11-12 15:03 ` Arnd Bergmann 2012-11-12 15:03 ` Arnd Bergmann 2012-11-15 14:17 ` Linus Walleij 2012-11-15 14:17 ` Linus Walleij [not found] ` <CACRpkdb9tSUUGQjWdHqRr5rUSyiPgWm2i3-QZq9VbWFY2EAQeQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2012-11-15 14:19 ` Viresh Kumar 2012-11-15 14:19 ` Viresh Kumar [not found] ` <CAKohpomLRYAKJ=dNLVsjj1xf=G6xj4EcTpPmhSDvgBYUMXc1mA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2012-11-15 19:09 ` Linus Walleij 2012-11-15 19:09 ` Linus Walleij 2012-11-16 5:15 ` [PATCH 01/16] gpio: " Viresh Kumar 2012-11-16 5:15 ` Viresh Kumar [not found] ` <3702a1036f8e714e6d18e4726569bbb1eadd65bf.1353042873.git.viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2012-11-16 8:19 ` Arnd Bergmann 2012-11-16 8:19 ` Arnd Bergmann [not found] ` <201211160819.04343.arnd-r2nGTMty4D4@public.gmane.org> 2012-11-16 8:19 ` Viresh Kumar 2012-11-16 8:19 ` Viresh Kumar 2012-11-17 23:02 ` Linus Walleij 2012-11-17 23:02 ` Linus Walleij 2012-11-11 4:39 ` [PATCH 02/14] ARM: SPEAr13xx: DT: Add spics gpio controller nodes Viresh Kumar 2012-11-11 4:39 ` Viresh Kumar [not found] ` <58a7d91cab20b924784fb5a09e16ca08e6f13318.1352608333.git.viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2012-11-13 14:08 ` Linus Walleij 2012-11-13 14:08 ` Linus Walleij 2012-11-13 14:34 ` Viresh Kumar 2012-11-13 14:34 ` Viresh Kumar [not found] ` <CAKohpon=AVGZmR_cwUZ4=buw0kr3JVtXh51BtXteWkJ7E-f_bQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2012-11-15 14:06 ` Linus Walleij 2012-11-15 14:06 ` Linus Walleij [not found] ` <CACRpkdaJ2kCYfSP=xCRQAG2wDnkMKX9fey+ByhDDiOS==u+XwA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2012-11-15 14:08 ` Viresh Kumar 2012-11-15 14:08 ` Viresh Kumar [not found] ` <CAKohpok7-iBCoYk+aAXZPsOODyh6tp2nutC+6wYOot-bK3=wkg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2012-11-15 17:25 ` Linus Walleij 2012-11-15 17:25 ` Linus Walleij 2012-11-11 4:39 ` [PATCH 03/14] ARM: SPEAr: DT: Update pinctrl list Viresh Kumar 2012-11-11 4:39 ` Viresh Kumar 2012-11-11 4:39 ` [PATCH 04/14] ARM: SPEAr: DT: Update partition info for MTD devices Viresh Kumar 2012-11-11 4:39 ` Viresh Kumar 2012-11-11 4:39 ` [PATCH 05/14] ARM: SPEAr: DT: Fix existing DT support Viresh Kumar 2012-11-11 4:39 ` Viresh Kumar 2012-11-11 4:39 ` [PATCH 06/14] ARM: SPEAr: DT: Modify DT bindings for STMMAC Viresh Kumar 2012-11-11 4:39 ` Viresh Kumar 2012-11-11 4:39 ` [PATCH 07/14] ARM: SPEAr: DT: add uart state to fix warning Viresh Kumar 2012-11-11 4:39 ` Viresh Kumar 2012-11-11 4:39 ` [PATCH 08/14] ARM: SPEAr: DT: Update device nodes Viresh Kumar 2012-11-11 4:39 ` Viresh Kumar [not found] ` <b3925b105ee2c6fe828ef3b54928aeee02a801ae.1352608333.git.viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2012-11-26 11:25 ` Viresh Kumar 2012-11-26 11:25 ` Viresh Kumar 2012-11-11 4:39 ` [PATCH 09/14] ARM: SPEAr1310: Move 1310 specific misc register into machine specific files Viresh Kumar 2012-11-11 4:39 ` Viresh Kumar 2012-11-11 4:39 ` [PATCH 10/14] ARM: SPEAr13xx: Remove fields not required for ssp controller Viresh Kumar 2012-11-11 4:39 ` Viresh Kumar 2012-11-11 4:39 ` [PATCH 11/14] ARM: SPEAr1310: Fix AUXDATA for compact flash controller Viresh Kumar 2012-11-11 4:39 ` Viresh Kumar 2012-11-11 4:39 ` [PATCH 12/14] ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT Viresh Kumar 2012-11-11 4:39 ` Viresh Kumar 2012-11-12 15:09 ` Arnd Bergmann 2012-11-12 15:09 ` Arnd Bergmann 2012-11-12 16:37 ` viresh kumar 2012-11-12 16:37 ` viresh kumar [not found] ` <CAOh2x=nJXVVjFmDFnTN_02PSG9hcDuXToRUzRMi5jwJqUFtgfw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2012-11-12 17:00 ` Arnd Bergmann 2012-11-12 17:00 ` Arnd Bergmann 2012-11-12 17:16 ` [PATCH] fixup! " Viresh Kumar 2012-11-12 17:16 ` Viresh Kumar 2012-11-12 17:35 ` [PATCH] ARM: SPEAr3xx: Shirq: Move shirq controller out of plat/ Viresh Kumar 2012-11-12 17:35 ` Viresh Kumar 2012-11-11 4:39 ` [PATCH 13/14] ARM: SPEAr3xx: DT: add shirq node for interrupt multiplexor Viresh Kumar 2012-11-11 4:39 ` Viresh Kumar 2012-11-11 4:39 ` Viresh Kumar [this message] 2012-11-11 4:39 ` [PATCH 14/14] ARM: SPEAr320: DT: Add SPEAr 320 HMI board support Viresh Kumar [not found] ` <cover.1352608333.git.viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2012-11-12 15:21 ` [PATCH 00/14] ARM: SPEAr: DT updates Arnd Bergmann 2012-11-12 15:21 ` Arnd Bergmann 2012-11-12 16:39 ` viresh kumar 2012-11-12 16:39 ` viresh kumar 2012-11-12 17:18 ` Viresh Kumar 2012-11-12 17:18 ` Viresh Kumar [not found] ` <CAKohpom0kMjuHx5jO-LTPKQhy_-r4khKi7UBPB_O-50K42FOeQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2012-11-21 20:24 ` Olof Johansson 2012-11-21 20:24 ` Olof Johansson [not found] ` <20121121202405.GA15549-O5ziIzlqnXUVNXGz7ipsyg@public.gmane.org> 2012-11-22 3:19 ` Viresh Kumar 2012-11-22 3:19 ` Viresh Kumar [not found] ` <CAKohpokMUTQja6tCz1RmKXFgu+X7MGFAi1+UWLgKhpViOuiMSA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2012-11-22 9:47 ` Linus Walleij 2012-11-22 9:47 ` Linus Walleij
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=772a8c2f5edc2a342219c8cc0d6bec8daa70eb90.1352608333.git.viresh.kumar@linaro.org \ --to=viresh.kumar@linaro.org \ --cc=arm@kernel.org \ --cc=arnd@arndb.de \ --cc=devicetree-discuss@lists.ozlabs.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=olof@lixom.net \ --cc=spear-devel@list.st.com \ --cc=sr@denx.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.