Re: [PASEMI] Nemo board doesn't recognize any ATA disks with the pci-v5.16 updates

[Christian Zigotzky <chzigotzky@xenosoft.de>]

On 09 November 2021 at 03:45 pm, Christian Zigotzky wrote:
 > Hello,
 >
 > The Nemo board [1] doesn't recognize any ATA disks with the pci-v5.16 
updates [2].
 >
 > Error messages:
 >
 > ata4.00: gc timeout cmd 0xec
 > ata4.00: failed to IDENTIFY (I/O error, error_mask=0x4)
 > ata1.00: gc timeout cmd 0xec
 > ata1.00: failed to IDENTIFY (I/O error, error_mask=0x4)
 > ata3.00: gc timeout cmd 0xec
 > ata3.00: failed to IDENTIFY (I/O error, error_mask=0x4)
 >
 > I was able to revert the new pci-v5.16 updates [2]. After a new 
compiling, the kernel recognize all ATA disks correctly.
 >
 > Could you please check the pci-v5.16 updates [2]?
 >
 > Please find attached the kernel config.
 >
 > Thanks,
 > Christian
 >
 > [1] https://en.wikipedia.org/wiki/AmigaOne_X1000
 > [2] 
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0c5c62ddf88c34bc83b66e4ac9beb2bb0e1887d4

Hi All,

Many thanks for your nice responses.

I bisected today [1]. 0412841812265734c306ba5ef8088bcb64d5d3bd (of/irq: 
Allow matching of an interrupt-map local to an interrupt controller) [2] 
is the first bad commit.

I was able to revert the first bad commit [1]. After a new compiling, 
the kernel detects all ATA disks without any problems.

I created a patch for an easy reverting the bad commit [1]. With this 
patch we can do further our kernel tests.

Could you please check the first bad commit [2]?

Thanks,
Christian

[1] https://forum.hyperion-entertainment.com/viewtopic.php?p=54398#p54398
[2] 
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0412841812265734c306ba5ef8088bcb64d5d3bd

[+ Marc Zyngier, Alyssa Rosenzweig, Lorenzo Pieralisi, and Rob Herring 
because of the first bad commit]