From: Ricky WU <ricky_wu@realtek.com>
To: "arnd@arndb.de" <arnd@arndb.de>,
"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>,
Ricky WU <ricky_wu@realtek.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: "ulf.hansson@linaro.org" <ulf.hansson@linaro.org>,
"frank.li@vivo.com" <frank.li@vivo.com>,
"u.kleine-koenig@pengutronix.de" <u.kleine-koenig@pengutronix.de>,
"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>
Subject: [PATCH v5 2/3] misc: rtsx: add to support new card reader rts5264
Date: Tue, 28 Nov 2023 05:41:36 +0000 [thread overview]
Message-ID: <78c703d7ad3e4edb9b7df9e4ade60014@realtek.com> (raw)
add rts5264 to judgement then do the rts5264 function
or set some rts5264 registers
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
---
v2: removed ic version check
v3: split the patch up with cardreader part and mmc part
v4: split new definition up from v3
---
drivers/misc/cardreader/rtsx_pcr.c | 30 +++++++++++++++++++++++++-----
drivers/misc/cardreader/rtsx_pcr.h | 1 +
include/linux/rtsx_pci.h | 8 ++++++++
3 files changed, 34 insertions(+), 5 deletions(-)
diff --git a/drivers/misc/cardreader/rtsx_pcr.c b/drivers/misc/cardreader/rtsx_pcr.c
index a30751ad3733..1a64364700eb 100644
--- a/drivers/misc/cardreader/rtsx_pcr.c
+++ b/drivers/misc/cardreader/rtsx_pcr.c
@@ -26,6 +26,7 @@
#include "rtsx_pcr.h"
#include "rts5261.h"
#include "rts5228.h"
+#include "rts5264.h"
static bool msi_en = true;
module_param(msi_en, bool, S_IRUGO | S_IWUSR);
@@ -54,6 +55,7 @@ static const struct pci_device_id rtsx_pci_ids[] = {
{ PCI_DEVICE(0x10EC, 0x5260), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5261), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5228), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+ { PCI_DEVICE(0x10EC, 0x5264), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ 0, }
};
@@ -714,6 +716,9 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
if (PCI_PID(pcr) == PID_5228)
return rts5228_pci_switch_clock(pcr, card_clock,
ssc_depth, initial_mode, double_clk, vpclk);
+ if (PCI_PID(pcr) == PID_5264)
+ return rts5264_pci_switch_clock(pcr, card_clock,
+ ssc_depth, initial_mode, double_clk, vpclk);
if (initial_mode) {
/* We use 250k(around) here, in initial stage */
@@ -987,7 +992,8 @@ static irqreturn_t rtsx_pci_isr(int irq, void *dev_id)
int_reg &= (pcr->bier | 0x7FFFFF);
- if (int_reg & SD_OC_INT)
+ if ((int_reg & SD_OC_INT) ||
+ ((int_reg & SD_OVP_INT) && (PCI_PID(pcr) == PID_5264)))
rtsx_pci_process_ocp_interrupt(pcr);
if (int_reg & SD_INT) {
@@ -1159,7 +1165,9 @@ void rtsx_pci_enable_oobs_polling(struct rtsx_pcr *pcr)
{
u16 val;
- if ((PCI_PID(pcr) != PID_525A) && (PCI_PID(pcr) != PID_5260)) {
+ if ((PCI_PID(pcr) != PID_525A) &&
+ (PCI_PID(pcr) != PID_5260) &&
+ (PCI_PID(pcr) != PID_5264)) {
rtsx_pci_read_phy_register(pcr, 0x01, &val);
val |= 1<<9;
rtsx_pci_write_phy_register(pcr, 0x01, val);
@@ -1175,7 +1183,9 @@ void rtsx_pci_disable_oobs_polling(struct rtsx_pcr *pcr)
{
u16 val;
- if ((PCI_PID(pcr) != PID_525A) && (PCI_PID(pcr) != PID_5260)) {
+ if ((PCI_PID(pcr) != PID_525A) &&
+ (PCI_PID(pcr) != PID_5260) &&
+ (PCI_PID(pcr) != PID_5264)) {
rtsx_pci_read_phy_register(pcr, 0x01, &val);
val &= ~(1<<9);
rtsx_pci_write_phy_register(pcr, 0x01, val);
@@ -1226,7 +1236,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
rtsx_pci_enable_bus_int(pcr);
/* Power on SSC */
- if (PCI_PID(pcr) == PID_5261) {
+ if ((PCI_PID(pcr) == PID_5261) || (PCI_PID(pcr) == PID_5264)) {
/* Gating real mcu clock */
err = rtsx_pci_write_register(pcr, RTS5261_FW_CFG1,
RTS5261_MCU_CLOCK_GATING, 0);
@@ -1270,6 +1280,11 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
else if (PCI_PID(pcr) == PID_5228)
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2, 0xFF,
RTS5228_SSC_DEPTH_2M);
+ else if (is_version(pcr, 0x5264, IC_VER_A))
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0);
+ else if (PCI_PID(pcr) == PID_5264)
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2, 0xFF,
+ RTS5264_SSC_DEPTH_2M);
else
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2, 0xFF, 0x12);
@@ -1305,6 +1320,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
case PID_5260:
case PID_5261:
case PID_5228:
+ case PID_5264:
rtsx_pci_write_register(pcr, PM_CLK_FORCE_CTL, 1, 1);
break;
default:
@@ -1404,6 +1420,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
case 0x5228:
rts5228_init_params(pcr);
break;
+
+ case 0x5264:
+ rts5264_init_params(pcr);
+ break;
}
pcr_dbg(pcr, "PID: 0x%04x, IC version: 0x%02x\n",
@@ -1544,7 +1564,7 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
pcr->pci = pcidev;
dev_set_drvdata(&pcidev->dev, handle);
- if (CHK_PCI_PID(pcr, 0x525A))
+ if ((CHK_PCI_PID(pcr, 0x525A)) || (CHK_PCI_PID(pcr, 0x5264)))
bar = 1;
len = pci_resource_len(pcidev, bar);
base = pci_resource_start(pcidev, bar);
diff --git a/drivers/misc/cardreader/rtsx_pcr.h b/drivers/misc/cardreader/rtsx_pcr.h
index 37d1f316ae17..9215d66de00c 100644
--- a/drivers/misc/cardreader/rtsx_pcr.h
+++ b/drivers/misc/cardreader/rtsx_pcr.h
@@ -74,6 +74,7 @@ void rtl8411b_init_params(struct rtsx_pcr *pcr);
void rts5260_init_params(struct rtsx_pcr *pcr);
void rts5261_init_params(struct rtsx_pcr *pcr);
void rts5228_init_params(struct rtsx_pcr *pcr);
+void rts5264_init_params(struct rtsx_pcr *pcr);
static inline u8 map_sd_drive(int idx)
{
diff --git a/include/linux/rtsx_pci.h b/include/linux/rtsx_pci.h
index 534038d962e4..4612ef09a0c7 100644
--- a/include/linux/rtsx_pci.h
+++ b/include/linux/rtsx_pci.h
@@ -60,6 +60,7 @@
#define SD_EXIST (1 << 16)
#define DELINK_INT GPIO0_INT
#define MS_OC_INT (1 << 23)
+#define SD_OVP_INT (1 << 23)
#define SD_OC_INT (1 << 22)
#define CARD_INT (XD_INT | MS_INT | SD_INT)
@@ -80,6 +81,7 @@
#define OC_INT_EN (1 << 23)
#define DELINK_INT_EN GPIO0_INT_EN
#define MS_OC_INT_EN (1 << 23)
+#define SD_OVP_INT_EN (1 << 23)
#define SD_OC_INT_EN (1 << 22)
#define RTSX_DUM_REG 0x1C
@@ -583,6 +585,7 @@
#define OBFF_DISABLE 0x00
#define CDRESUMECTL 0xFE52
+#define CDGW 0xFE53
#define WAKE_SEL_CTL 0xFE54
#define PCLK_CTL 0xFE55
#define PCLK_MODE_SEL 0x20
@@ -764,6 +767,9 @@
#define SD_VIO_LDO_1V8 0x40
#define SD_VIO_LDO_3V3 0x70
+#define RTS5264_AUTOLOAD_CFG2 0xFF7D
+#define RTS5264_CHIP_RST_N_SEL (1 << 6)
+
#define RTS5260_AUTOLOAD_CFG4 0xFF7F
#define RTS5260_MIMO_DISABLE 0x8A
/*RTS5261*/
@@ -1261,6 +1267,7 @@ struct rtsx_pcr {
u8 dma_error_count;
u8 ocp_stat;
u8 ocp_stat2;
+ u8 ovp_stat;
u8 rtd3_en;
};
@@ -1271,6 +1278,7 @@ struct rtsx_pcr {
#define PID_5260 0x5260
#define PID_5261 0x5261
#define PID_5228 0x5228
+#define PID_5264 0x5264
#define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid))
#define PCI_VID(pcr) ((pcr)->pci->vendor)
--
2.25.1
reply other threads:[~2023-11-28 5:41 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=78c703d7ad3e4edb9b7df9e4ade60014@realtek.com \
--to=ricky_wu@realtek.com \
--cc=arnd@arndb.de \
--cc=frank.li@vivo.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=u.kleine-koenig@pengutronix.de \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.