All of lore.kernel.org
 help / color / mirror / Atom feed
From: Markus Reichl <m.reichl@fivetechno.de>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Heiko Stuebner <heiko@sntech.de>,
	Jagan Teki <jagan@amarulasolutions.com>,
	Markus Reichl <m.reichl@fivetechno.de>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: rockchip: Add LED nodes on rk3399-roc-pc
Date: Mon, 21 Oct 2019 12:24:36 +0200	[thread overview]
Message-ID: <7d8d85c9-5fde-7943-a6b6-639bca38bdc1@fivetechno.de> (raw)


[-- Attachment #1.1: Type: text/plain, Size: 1777 bytes --]

rk3399-roc-pc has three gpio LEDs, enable them.

Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
---
 .../arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 41 +++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
index faf60b2a7673..ba52e1053a2d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
@@ -28,6 +28,33 @@
 		#clock-cells = <0>;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
+
+		work-led {
+			label = "green:work";
+			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		diy-led {
+			label = "red:diy";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+
+		yellow-led {
+			label = "yellow:yellow-led";
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rk808 1>;
@@ -494,6 +521,20 @@
 		};
 	};
 
+	leds {
+		work_led_gpio: work_led-gpio {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_gpio: diy_led-gpio {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		yellow_led_gpio: yellow_led-gpio {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		vsel1_gpio: vsel1-gpio {
 			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
-- 
2.20.1





[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 659 bytes --]

WARNING: multiple messages have this Message-ID (diff)
From: Markus Reichl <m.reichl@fivetechno.de>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Heiko Stuebner <heiko@sntech.de>,
	Jagan Teki <jagan@amarulasolutions.com>,
	Markus Reichl <m.reichl@fivetechno.de>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: rockchip: Add LED nodes on rk3399-roc-pc
Date: Mon, 21 Oct 2019 12:24:36 +0200	[thread overview]
Message-ID: <7d8d85c9-5fde-7943-a6b6-639bca38bdc1@fivetechno.de> (raw)


[-- Attachment #1.1.1: Type: text/plain, Size: 1777 bytes --]

rk3399-roc-pc has three gpio LEDs, enable them.

Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
---
 .../arm64/boot/dts/rockchip/rk3399-roc-pc.dts | 41 +++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
index faf60b2a7673..ba52e1053a2d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts
@@ -28,6 +28,33 @@
 		#clock-cells = <0>;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
+
+		work-led {
+			label = "green:work";
+			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		diy-led {
+			label = "red:diy";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+
+		yellow-led {
+			label = "yellow:yellow-led";
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&rk808 1>;
@@ -494,6 +521,20 @@
 		};
 	};
 
+	leds {
+		work_led_gpio: work_led-gpio {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_gpio: diy_led-gpio {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		yellow_led_gpio: yellow_led-gpio {
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		vsel1_gpio: vsel1-gpio {
 			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
-- 
2.20.1





[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 659 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-10-21 10:24 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-21 10:24 Markus Reichl [this message]
2019-10-21 10:24 ` [PATCH] arm64: dts: rockchip: Add LED nodes on rk3399-roc-pc Markus Reichl
2019-10-27 18:18 ` Heiko Stuebner
2019-10-27 18:18   ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7d8d85c9-5fde-7943-a6b6-639bca38bdc1@fivetechno.de \
    --to=m.reichl@fivetechno.de \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=jagan@amarulasolutions.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.