[GIT PULL 2/2] arm64: dts: ti: K3 updates for v6.5

[Vignesh Raghavendra <vigneshr@ti.com>]

[-- Attachment #1.1: Type: text/plain, Size: 19870 bytes --]

Hi ARM SoC maintainers,

The following changes since commit ac9a78681b921877518763ba0e89202254349d1b:

  Linux 6.4-rc1 (2023-05-07 13:34:35 -0700)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-dt-for-v6.5

for you to fetch changes up to a49568115143435390f20965902809471b6f830c:

  arm64: dts: ti: Unify pin group node names for make dtbs checks (2023-06-15 20:58:38 +0530)

----------------------------------------------------------------
TI K3 device tree updates for v6.5

New Boards:
phyBOARD-Lyra-AM625 Board support
Toradex Verdin AM62 COM, carrier and dev boards

New features:
Across K3 SoCs:
 - Error Signaling Module(ESM) and Secproxy IPC modules
 - On board I2C EEPROM
 - Voltage Temp Monitoring (VTM) module
 - DM timers (GP Timers)
J784s4:
 - R5 and C7x DSP remoteproc, ADC, QSPI
AM69:
 - Addition of more peripherals: CPSW, eMMC, UARTs, I2C et al
J721s2:
 - USB, Serdes, OSPI, PCIe
AM62a:
- Watchdog
J721e:
- HyperFlash/HyperBus
AM62:
- Type-C USB0 port

Cleanups and non-urgent fixes
Particularly large set of cleanups to get rid of dtbs_check errors and
dtc warnings:
 - Addition of missing pinmux and uart nodes for AM64, AM62x, AM62A,
   J721e, J7200 that are used by bootloader
 - Split Pinmux regions/range to avoid holes for J721s2, J7200, J784s4
 - Drop bootargs and unneeded aliases across all K3 SoCs
 - Move aliases to board dts files from SoC dtsi files
 - Move to generic node name for can, rtc nodes on am65
 - s/-pins-default/default-pins/ to match upcoming pinctrl.yaml update
 - Fix pinctrl phandle references to use <> as separator where multiple
   entries are present

----------------------------------------------------------------
Andrew Davis (7):
      arm64: dts: ti: k3-j721e-beagleboneai64: Fix mailbox node status
      arm64: dts: ti: k3-j721e: Remove PCIe endpoint nodes
      arm64: dts: ti: k3-j721e: Enable PCIe nodes at the board level
      arm64: dts: ti: k3-am64: Enable Mailbox nodes at the board level
      arm64: dts: ti: k3-j721e: Enable MDIO nodes at the board level
      arm64: dts: ti: k3-am64: Only set UART baud for used ports
      arm64: dts: ti: k3-am64: Use phandle to stdout UART node

Apurva Nandan (2):
      arm64: dts: ti: k3-j784s4-mcu-wakeup: Add FSS OSPI0 and FSS OSPI1
      arm64: dts: ti: k3-j784s4-evm: Add support for OSPI and QSPI flashes

Aswath Govindraju (7):
      arm64: dts: ti: k3-j721s2-main: Add support for USB
      arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
      arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0
      arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support
      arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes
      arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node
      arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe

Bhavya Kapoor (4):
      arm64: dts: ti: k3-j721e-main: Update delay select values for MMC subsystems
      arm64: dts: ti: k3-j784s4-mcu-wakeup: Add support for ADC nodes
      arm64: dts: ti: k3-j784s4-evm: Add pinmux information for ADC
      arm64: dts: ti: k3-j784s4-main: Enable support for high speed modes

Bryan Brattlof (3):
      arm64: dts: ti: k3-am64-main: add VTM node
      arm64: dts: ti: k3-am62-wakeup: add VTM node
      arm64: dts: ti: k3-am62a-wakeup: add VTM node

Dasnavis Sabiya (2):
      arm64: dts: ti: k3-am69-sk: Add eMMC mmc0 support
      arm64: dts: ti: k3-am69-sk: Add pinmux for RPi Header

Francesco Dolcini (4):
      dt-bindings: arm: ti: add toradex,verdin-am62 et al.
      arm64: dts: ti: add verdin am62
      arm64: dts: ti: add verdin am62 dahlia
      arm64: dts: ti: add verdin am62 yavia

Hari Nagalla (3):
      arm64: dts: ti: k3-j784s4-main: Add R5F cluster nodes
      arm64: dts: ti: k3-j784s4-main: Add C71x DSP nodes
      arm64: dts: ti: k3-j784s4-evm: Reserve memory for remote proc IPC

Jyri Sarha (1):
      arm64: dts: ti: am65x: Add Rocktech OLDI panel DT overlay

Keerthy (5):
      arm64: dts: ti: k3-j7200: Fix physical address of pin
      arm64: dts: ti: j784s4: Add VTM node
      arm64: dts: ti: j721e: Add VTM node
      arm64: dts: ti: j7200: Add VTM node
      arm64: dts: ti: j721s2: Add VTM node

Krzysztof Kozlowski (1):
      arm64: dts: ti: add missing cache properties

Matt Ranostay (1):
      arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node

Neha Malcom Francis (4):
      arm64: dts: ti: k3-j721s2: Change CPTS clock parent
      dt-bindings: misc: esm: Add ESM support for TI K3 devices
      arm64: dts: ti: k3-j721e: Add ESM support
      arm64: dts: ti: k3-j7200: Add ESM support

Nishanth Menon (84):
      arm64: dts: ti: k3-am64: Add general purpose timers
      arm64: dts: ti: k3-am642-sk: Fix mmc1 pinmux
      arm64: dts: ti: k3-am642-sk: Enable main_i2c0 and eeprom
      arm64: dts: ti: k3-am642-sk: Describe main_uart1 pins
      arm64: dts: ti: k3-am642-sk: Rename regulator node name
      arm64: dts: ti: k3-am642-evm: Enable main_i2c0 and eeprom
      arm64: dts: ti: k3-am642-evm: Describe main_uart1 pins
      arm64: dts: ti: k3-am642-evm: Rename regulator node name
      arm64: dts: ti: k3-am642-evm: Add VTT GPIO regulator for DDR
      arm64: dts: ti: k3-am642-sk|evm: Drop bootargs, add aliases
      arm64: dts: ti: k3-am62x-sk-common: Drop bootargs
      arm64: dts: ti: k3-am65*: Drop bootargs
      arm64: dts: ti: k3-j721e-*: Drop bootargs
      arm64: dts: ti: k3-j7200-common-proc-board: Drop bootargs
      arm64: dts: ti: k3-j721s2-common-proc-board: Drop bootargs
      arm64: dts: ti: k3-am62a: Add general purpose timers
      arm64: dts: ti: k3-am62a: Add watchdog nodes
      arm64: dts: ti: k3-am654-base-board: Add missing pinmux wkup_uart, mcu_uart and mcu_i2c
      arm64: dts: ti: k3-am654-base-board: Rename regulator node name
      arm64: dts: ti: k3-am654-base-board: Add VTT GPIO regulator for DDR
      arm64: dts: ti: k3-am654-base-board: Add missing PMIC
      arm64: dts: ti: k3-am654-base-board: Add board detect eeprom
      arm64: dts: ti: k3-am654-base-board: Add aliases
      arm64: dts: ti: k3-am65: Drop aliases
      arm64: dts: ti: k3-am65-main: Remove "syscon" nodes added for pcieX_ctrl
      arm64: dts: ti: k3-am62a7-sk: Describe main_uart1 and wkup_uart
      arm64: dts: ti: k3: j721s2/j784s4: Switch to https links
      arm64: dts: ti: k3-am62x-sk-common: Drop extra EoL
      arm64: dts: ti: k3-am62x-sk-common: Describe main_uart1 and wkup_uart
      arm64: dts: ti: k3-am62x-sk-common: Add eeprom
      arm64: dts: ti: k3-am62x-sk-common: Improve documentation of mcasp1_pins
      arm64: dts: ti: k3-am65-main: Fix mcan node name
      arm64: dts: ti: k3-am65-main: Drop deprecated ti,otap-del-sel property
      arm64: dts: ti: k3-am65-iot2050-common: Rename rtc8564 nodename
      arm64: dts: ti: k3-am62a-main: Add sa3_secproxy
      arm64: dts: ti: k3-am65-mcu: Add mcu_secproxy
      arm64: dts: ti: k3-j7200-mcu: Add mcu_secproxy
      arm64: dts: ti: k3-j721e-mcu: Add mcu_secproxy
      arm64: dts: ti: k3-j721s2-mcu-wakeup: Add sa3_secproxy and mcu_sec_proxy
      arm64: dts: ti: k3-j784s4-mcu-wakeup: Add sa3_secproxy and mcu_sec_proxy
      arm64: dts: ti: k3-j721e: Add general purpose timers
      arm64: dts: ti: k3-j721e: Configure pinctrl for timer IO
      arm64: dts: ti: k3-j721s2: Add general purpose timers
      arm64: dts: ti: k3-j721s2: Configure pinctrl for timer IO
      arm64: dts: ti: k3-j784s4: Add general purpose timers
      arm64: dts: ti: k3-j784s4: Configure pinctrl for timer IO
      arm64: dts: ti: k3-j721e-sk: Fixup reference to phandles array
      arm64: dts: ti: k3-j721e-som-p0/common-proc-board: Fixup reference to phandles array
      arm64: dts: ti: k3-j721e-beagleboneai64: Move camera gpio pinctrl to gpio node
      arm64: dts: ti: k3-j721e-beagleboneai64: Move eeprom WP gpio pinctrl to eeprom node
      arm64: dts: ti: k3-j721e-beagleboneai64: Fixup reference to phandles array
      arm64: dts: ti: k3-am642-phyboard-electra-rdk: Fixup reference to phandles array
      arm64: dts: ti: k3-j7200-som/common-proc-board: Fixup reference to phandles array
      arm64: dts: ti: k3-j721s2-common-proc-board: Fixup reference to phandles array
      arm64: dts: ti: k3-am625-sk: Fixup reference to phandles array
      arm64: dts: ti: k3-am64-evm: Fixup reference to phandles array
      arm64: dts: ti: k3-am64-sk: Fixup reference to phandles array
      arm64: dts: ti: k3-am65-iot*: Fixup reference to phandles array
      arm64: dts: ti: k3-am654-base-board: Fixup reference to phandles array
      arm64: dts: ti: k3-am68-sk-base-board: Fixup reference to phandles array
      arm64: dts: ti: k3-j784s4-evm: Fix main_i2c0 alias
      arm64: dts: ti: k3-j784s4-evm: Add mcu and wakeup uarts
      arm64: dts: ti: k3-j784s4-evm: Enable wakeup_i2c0 and eeprom
      arm64: dts: ti: k3-am69-sk: Fix main_i2c0 alias
      arm64: dts: ti: k3-am69-sk: Enable mcu network port
      arm64: dts: ti: k3-am69-sk: Add mcu and wakeup uarts
      arm64: dts: ti: k3-am69-sk: Enable wakeup_i2c0 and eeprom
      arm64: dts: ti: k3-j721e-sk: Add missing uart pinmuxes
      arm64: dts: ti: k3-j721e-sk: Enable wakeup_i2c0 and eeprom
      arm64: dts: ti: j721e-som/common-proc-board: Add product links
      arm64: dts: ti: j721e-common-proc-board: Add uart pinmux
      arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom
      arm64: dts: ti: k3-j721e-beagleboneai64: Add wakeup_uart pinmux
      arm64: dts: ti: k3-j721e-sk: Define aliases at board level
      arm64: dts: ti: k3-j721e-common-proc-board: Define aliases at board level
      arm64: dts: ti: k3-j721e: Drop SoC level aliases
      arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmux
      arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eeprom
      arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux
      arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eeprom
      arm64: dts: ti: k3-am62: Add ESM support
      arm64: dts: ti: k3-am64: Add ESM support
      arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom
      arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodename

Nitin Yadav (1):
      arm64: dts: ti: k3-am62-main: Add sa3_secproxy

Roger Quadros (1):
      arm64: dts: ti: k3-am625: Enable Type-C port for USB0

Sinthu Raja (2):
      arm64: dts: ti: k3-j721s2: Fix wkup pinmux range
      arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi Header

Thejasvi Konduru (1):
      arm64: dts: ti: k3-j784s4: Fix wakeup pinmux range and pinctrl node offsets

Tony Lindgren (1):
      arm64: dts: ti: Unify pin group node names for make dtbs checks

Udit Kumar (7):
      arm64: dts: ti: k3-j7200-som: Enable I2C
      arm64: dts: ti: k3-j7200: Add general purpose timers
      arm64: dts: ti: k3-j7200: Configure pinctrl for timer IO pads
      arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main_i2c0 pin mux
      arm64: dts: ti: k3-j7200-common-proc-board: Add uart pinmux
      arm64: dts: ti: k3-j7200-common-proc-board: Define aliases at board level
      arm64: dts: ti: k3-j7200: Drop SoC level aliases

Vaishnav Achath (9):
      arm64: dts: ti: k3-j721e-mcu-wakeup: Add HyperBus node
      arm64: dts: ti: k3-j721e-som-p0: Add HyperFlash node
      arm64: dts: ti: k3-j7200-common-proc-board: Add OSPI/Hyperflash select pinmux
      arm64: dts: ti: k3-j721e-common-proc-board: Add OSPI/Hyperflash select pinmux
      arm64: dts: ti: k3-j721e: Describe OSPI and QSPI flash partition info
      arm64: dts: ti: k3-j721e-sk: Describe OSPI flash partition info
      arm64: dts: ti: k3-j7200-som: Describe OSPI and Hyperflash partition info
      arm64: dts: ti: k3-am654-baseboard: Describe OSPI flash partition info
      arm64: dts: ti: k3-am642-sk/evm: Describe OSPI flash partition info

Wadim Egorov (3):
      arm64: dts: ti: Add LED controller to phyBOARD-Electra
      dt-bindings: arm: ti: Add bindings for PHYTEC AM62x based hardware
      arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625

 Documentation/devicetree/bindings/arm/ti/k3.yaml             |   26 +
 Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml     |   53 +
 arch/arm64/boot/dts/ti/Makefile                              |    9 +
 arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts                     |    6 +-
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi                     |   21 +
 arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi                      |    6 +
 arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi              |  324 +++
 arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi                  |   33 +
 arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi            |  161 ++
 arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi               |  190 ++
 arch/arm64/boot/dts/ti/k3-am62-verdin-nonwifi.dtsi           |   20 +
 arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi              |   39 +
 arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi             |  207 ++
 arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi                   | 1401 ++++++++++
 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi                   |    8 +
 arch/arm64/boot/dts/ti/k3-am62.dtsi                          |    8 +-
 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts               |   52 +-
 arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts        |  266 ++
 arch/arm64/boot/dts/ti/k3-am625-sk.dts                       |   13 +-
 arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dahlia.dts    |   22 +
 arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dev.dts       |   22 +
 arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-yavia.dts     |   22 +
 arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dahlia.dts       |   22 +
 arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts          |   22 +
 arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-yavia.dts        |   22 +
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi                    |  156 ++
 arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi                     |   56 +
 arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi                 |   47 +
 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi                  |   19 +
 arch/arm64/boot/dts/ti/k3-am62a.dtsi                         |    2 +
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts                      |   58 +-
 arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi               |   97 +-
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi                     |  171 +-
 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi                      |   53 +-
 arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi              |   36 +-
 arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi                  |   33 +
 arch/arm64/boot/dts/ti/k3-am64.dtsi                          |   19 +-
 arch/arm64/boot/dts/ti/k3-am642-evm.dts                      |  173 +-
 arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts     |   51 +-
 arch/arm64/boot/dts/ti/k3-am642-sk.dts                       |  166 +-
 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi           |   68 +-
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi                     |   28 +-
 arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi                      |   19 +-
 arch/arm64/boot/dts/ti/k3-am65.dtsi                          |   17 -
 arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi   |    2 +-
 .../dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso     |   71 +
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts               |  172 +-
 arch/arm64/boot/dts/ti/k3-am654.dtsi                         |    1 +
 .../arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi |    2 +-
 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts     |   24 +-
 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts             |  171 +-
 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi                   |   22 +
 arch/arm64/boot/dts/ti/k3-am69-sk.dts                        |  182 +-
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts        |  121 +-
 arch/arm64/boot/dts/ti/k3-j7200-evm-quad-port-eth-exp.dtso   |    2 +-
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi                    |  264 ++
 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi              |  179 +-
 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi                  |  107 +-
 arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi                 |   47 +
 arch/arm64/boot/dts/ti/k3-j7200.dtsi                         |   21 +-
 arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts           |  157 +-
 arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts        |  226 +-
 arch/arm64/boot/dts/ti/k3-j721e-evm-quad-port-eth-exp.dtso   |    2 +-
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi                    |  362 ++-
 arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi              |  206 ++
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts                       |  210 +-
 arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi                  |  167 +-
 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi                 |   75 +
 arch/arm64/boot/dts/ti/k3-j721e.dtsi                         |   23 +-
 arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts       |  213 +-
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi                   |  405 +++
 arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi             |  275 +-
 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi                 |   67 +-
 arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi                |  101 +
 arch/arm64/boot/dts/ti/k3-j721s2.dtsi                        |    7 +-
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts                     |  616 +++-
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi                   |  427 ++-
 arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi             |  350 ++-
 arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi                |  101 +
 arch/arm64/boot/dts/ti/k3-j784s4.dtsi                        |    6 +-
 80 files changed, 8767 insertions(+), 861 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62-verdin-nonwifi.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62-verdin-wifi.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dahlia.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-dev.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-yavia.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dahlia.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-dev.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-yavia.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am654-base-board-rocktech-rk101-panel.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-thermal.dtsi

-- 
Regards
Vignesh

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 495 bytes --]