[PATCH v1 1/2] dt-bindings: drm/bridge: anx7625: MIPI to DP transmitter binding

[Xin Ji <xji@analogixsemi.com>]

The ANX7625 is an ultra-low power 4K Mobile HD Transmitter designed
for portable device. It converts MIPI to DisplayPort 1.3 4K.

You can add support to your board with binding.

Example:
	anx_bridge: anx7625@58 {
		compatible = "analogix,anx7625";
		reg = <0x58>;
		low-power-mode = <1>;
		enable-gpios = <&gpio0 45 GPIO_ACTIVE_LOW>;
		reset-gpios = <&gpio0 73 GPIO_ACTIVE_LOW>;
		status = "okay";
		port@0 {
			reg = <0>;
			anx7625_1_in: endpoint {
				remote-endpoint = <&mipi_dsi_bridge_1>;
			};
		};
	};

Signed-off-by: Xin Ji <xji@analogixsemi.com>
---
 .../bindings/display/bridge/anx7625.yaml           | 84 ++++++++++++++++++++++
 1 file changed, 84 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/anx7625.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/anx7625.yaml
new file mode 100644
index 0000000..2991039
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/anx7625.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analogix Semiconductor, Inc.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/bridge/anx7625.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter)
+
+maintainers:
+  - Xin Ji <xji@analogixsemi.com>
+
+description: |
+  The ANX7625 is an ultra-low power 4K Mobile HD Transmitter
+  designed for portable devices.
+
+properties:
+  compatible:
+    items:
+      - const: analogix,anx7625
+
+  reg:
+    maxItems: 1
+
+  low-power-mode:
+    description: Low power mode support feature
+    maxItems: 1
+
+  hpd-gpios:
+    description: used for HPD interrupt
+    maxItems: 1
+
+  enable-gpios:
+    description: used for power on chip control
+    maxItems: 1
+
+  reset-gpios:
+    description: used for reset chip control
+    maxItems: 1
+
+  port@0:
+    type: object
+    description:
+      A port node pointing to MIPI DSI host port node.
+
+  port@1:
+    type: object
+    description:
+      A port node pointing to MIPI DPI host port node.
+
+  port@2:
+    type: object
+    description:
+      A port node pointing to external connector port node.
+
+  port@3:
+    type: object
+    description:
+      A port node pointing to internal panel port node.
+
+  port@4:
+    type: object
+    description:
+      A port node pointing to normal eDP port node.
+
+required:
+  - compatible
+  - reg
+  - port@0 | port@1
+
+example:
+  - |
+    anx_bridge: anx7625@58 {
+        compatible = "analogix,anx7625";
+        reg = <0x58>;
+        low-power-mode = <0>;
+        status = "okay";
+        port@0 {
+          reg = <0>;
+          anx7625_1_in: endpoint {
+            remote-endpoint = <&mipi_dsi_bridge_1>;
+          };
+        };
+    };
-- 
2.7.4