All of lore.kernel.org
 help / color / mirror / Atom feed
From: Uri Shkolnik <urishk@yahoo.com>
To: LinuxML <linux-media@vger.kernel.org>
Subject: [PATCH] [09051_43] Siano: Add new GPIO management interface
Date: Tue, 19 May 2009 07:49:19 -0700 (PDT)	[thread overview]
Message-ID: <855967.12185.qm@web110807.mail.gq1.yahoo.com> (raw)


# HG changeset patch
# User Uri Shkolnik <uris@siano-ms.com>
# Date 1242744570 -10800
# Node ID 749c11a362a9fad1992809007247d5c76c35bfc9
# Parent  08e292f80f37496d8d4b43a542f518196eaa4dc0
[09051_43] Siano: Add new GPIO management interface

From: Uri Shkolnik <uris@siano-ms.com>

Add new GPIO management interface to replace old (buggy) one.
Keeping old interface intact for now.

Priority: normal

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>

diff -r 08e292f80f37 -r 749c11a362a9 linux/drivers/media/dvb/siano/sms-cards.c
--- a/linux/drivers/media/dvb/siano/sms-cards.c	Tue May 19 16:30:40 2009 +0300
+++ b/linux/drivers/media/dvb/siano/sms-cards.c	Tue May 19 17:49:30 2009 +0300
@@ -109,7 +109,7 @@ static int sms_set_gpio(struct smscore_d
 {
 	int lvl, ret;
 	u32 gpio;
-	struct smscore_gpio_config gpioconfig = {
+	struct smscore_config_gpio gpioconfig = {
 		.direction            = SMS_GPIO_DIRECTION_OUTPUT,
 		.pullupdown           = SMS_GPIO_PULLUPDOWN_NONE,
 		.inputcharacteristics = SMS_GPIO_INPUTCHARACTERISTICS_NORMAL,
diff -r 08e292f80f37 -r 749c11a362a9 linux/drivers/media/dvb/siano/smscoreapi.c
--- a/linux/drivers/media/dvb/siano/smscoreapi.c	Tue May 19 16:30:40 2009 +0300
+++ b/linux/drivers/media/dvb/siano/smscoreapi.c	Tue May 19 17:49:30 2009 +0300
@@ -1331,8 +1331,9 @@ static int smscore_map_common_buffer(str
 }
 #endif
 
+/* old GPIO managments implementation */
 int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin,
-			   struct smscore_gpio_config *pinconfig)
+			   struct smscore_config_gpio *pinconfig)
 {
 	struct {
 		struct SmsMsgHdr_ST hdr;
@@ -1399,6 +1400,238 @@ int smscore_set_gpio(struct smscore_devi
 
 	return coredev->sendrequest_handler(coredev->context,
 					    &msg, sizeof(msg));
+}
+
+/* new GPIO managment implementation */
+static int GetGpioPinParams(u32 PinNum, u32 *pTranslatedPinNum,
+		u32 *pGroupNum, u32 *pGroupCfg) {
+
+	*pGroupCfg = 1;
+
+	if (PinNum >= 0 && PinNum <= 1)	{
+		*pTranslatedPinNum = 0;
+		*pGroupNum = 9;
+		*pGroupCfg = 2;
+	} else if (PinNum >= 2 && PinNum <= 6) {
+		*pTranslatedPinNum = 2;
+		*pGroupNum = 0;
+		*pGroupCfg = 2;
+	} else if (PinNum >= 7 && PinNum <= 11) {
+		*pTranslatedPinNum = 7;
+		*pGroupNum = 1;
+	} else if (PinNum >= 12 && PinNum <= 15) {
+		*pTranslatedPinNum = 12;
+		*pGroupNum = 2;
+		*pGroupCfg = 3;
+	} else if (PinNum == 16) {
+		*pTranslatedPinNum = 16;
+		*pGroupNum = 23;
+	} else if (PinNum >= 17 && PinNum <= 24) {
+		*pTranslatedPinNum = 17;
+		*pGroupNum = 3;
+	} else if (PinNum == 25) {
+		*pTranslatedPinNum = 25;
+		*pGroupNum = 6;
+	} else if (PinNum >= 26 && PinNum <= 28) {
+		*pTranslatedPinNum = 26;
+		*pGroupNum = 4;
+	} else if (PinNum == 29) {
+		*pTranslatedPinNum = 29;
+		*pGroupNum = 5;
+		*pGroupCfg = 2;
+	} else if (PinNum == 30) {
+		*pTranslatedPinNum = 30;
+		*pGroupNum = 8;
+	} else if (PinNum == 31) {
+		*pTranslatedPinNum = 31;
+		*pGroupNum = 17;
+	} else
+		return -1;
+
+	*pGroupCfg <<= 24;
+
+	return 0;
+}
+
+int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum,
+		struct smscore_gpio_config *pGpioConfig) {
+
+	u32 totalLen;
+	u32 TranslatedPinNum;
+	u32 GroupNum;
+	u32 ElectricChar;
+	u32 groupCfg;
+	void *buffer;
+	int rc;
+
+	struct SetGpioMsg {
+		struct SmsMsgHdr_ST xMsgHeader;
+		u32 msgData[6];
+	} *pMsg;
+
+
+	if (PinNum > MAX_GPIO_PIN_NUMBER)
+		return -EINVAL;
+
+	if (pGpioConfig == NULL)
+		return -EINVAL;
+
+	totalLen = sizeof(struct SmsMsgHdr_ST) + (sizeof(u32) * 6);
+
+	buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT,
+			GFP_KERNEL | GFP_DMA);
+	if (!buffer)
+		return -ENOMEM;
+
+	pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer);
+
+	pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
+	pMsg->xMsgHeader.msgDstId = HIF_TASK;
+	pMsg->xMsgHeader.msgFlags = 0;
+	pMsg->xMsgHeader.msgLength = (u16) totalLen;
+	pMsg->msgData[0] = PinNum;
+
+	if (!(coredev->device_flags & SMS_DEVICE_FAMILY2)) {
+		pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_CONFIG_REQ;
+		if (GetGpioPinParams(PinNum, &TranslatedPinNum, &GroupNum,
+				&groupCfg) != 0)
+			return -EINVAL;
+
+		pMsg->msgData[1] = TranslatedPinNum;
+		pMsg->msgData[2] = GroupNum;
+		ElectricChar = (pGpioConfig->PullUpDown)
+				| (pGpioConfig->InputCharacteristics << 2)
+				| (pGpioConfig->OutputSlewRate << 3)
+				| (pGpioConfig->OutputDriving << 4);
+		pMsg->msgData[3] = ElectricChar;
+		pMsg->msgData[4] = pGpioConfig->Direction;
+		pMsg->msgData[5] = groupCfg;
+	} else {
+		pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_CONFIG_EX_REQ;
+		pMsg->msgData[1] = pGpioConfig->PullUpDown;
+		pMsg->msgData[2] = pGpioConfig->OutputSlewRate;
+		pMsg->msgData[3] = pGpioConfig->OutputDriving;
+		pMsg->msgData[4] = pGpioConfig->Direction;
+		pMsg->msgData[5] = 0;
+	}
+
+	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg);
+	rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen,
+			&coredev->gpio_configuration_done);
+
+	if (rc != 0) {
+		if (rc == -ETIME)
+			sms_err("smscore_gpio_configure timeout");
+		else
+			sms_err("smscore_gpio_configure error");
+	}
+	kfree(buffer);
+
+	return rc;
+}
+
+int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum,
+		u8 NewLevel) {
+
+	u32 totalLen;
+	int rc;
+	void *buffer;
+
+	struct SetGpioMsg {
+		struct SmsMsgHdr_ST xMsgHeader;
+		u32 msgData[3]; /* keep it 3 ! */
+	} *pMsg;
+
+	if ((NewLevel > 1) || (PinNum > MAX_GPIO_PIN_NUMBER) ||
+			(PinNum > MAX_GPIO_PIN_NUMBER))
+		return -EINVAL;
+
+	totalLen = sizeof(struct SmsMsgHdr_ST) +
+			(3 * sizeof(u32)); /* keep it 3 ! */
+
+	buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT,
+			GFP_KERNEL | GFP_DMA);
+	if (!buffer)
+		return -ENOMEM;
+
+	pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer);
+
+	pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
+	pMsg->xMsgHeader.msgDstId = HIF_TASK;
+	pMsg->xMsgHeader.msgFlags = 0;
+	pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_SET_LEVEL_REQ;
+	pMsg->xMsgHeader.msgLength = (u16) totalLen;
+	pMsg->msgData[0] = PinNum;
+	pMsg->msgData[1] = NewLevel;
+
+	/* Send message to SMS */
+	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg);
+	rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen,
+			&coredev->gpio_set_level_done);
+
+	if (rc != 0) {
+		if (rc == -ETIME)
+			sms_err("smscore_gpio_set_level timeout");
+		else
+			sms_err("smscore_gpio_set_level error");
+	}
+	kfree(buffer);
+
+	return rc;
+}
+
+int smscore_gpio_get_level(struct smscore_device_t *coredev, u8 PinNum,
+		u8 *level) {
+
+	u32 totalLen;
+	int rc;
+	void *buffer;
+
+	struct SetGpioMsg {
+		struct SmsMsgHdr_ST xMsgHeader;
+		u32 msgData[2];
+	} *pMsg;
+
+
+	if (PinNum > MAX_GPIO_PIN_NUMBER)
+		return -EINVAL;
+
+	totalLen = sizeof(struct SmsMsgHdr_ST) + (2 * sizeof(u32));
+
+	buffer = kmalloc(totalLen + SMS_DMA_ALIGNMENT,
+			GFP_KERNEL | GFP_DMA);
+	if (!buffer)
+		return -ENOMEM;
+
+	pMsg = (struct SetGpioMsg *) SMS_ALIGN_ADDRESS(buffer);
+
+	pMsg->xMsgHeader.msgSrcId = DVBT_BDA_CONTROL_MSG_ID;
+	pMsg->xMsgHeader.msgDstId = HIF_TASK;
+	pMsg->xMsgHeader.msgFlags = 0;
+	pMsg->xMsgHeader.msgType = MSG_SMS_GPIO_GET_LEVEL_REQ;
+	pMsg->xMsgHeader.msgLength = (u16) totalLen;
+	pMsg->msgData[0] = PinNum;
+	pMsg->msgData[1] = 0;
+
+	/* Send message to SMS */
+	smsendian_handle_tx_message((struct SmsMsgHdr_ST *)pMsg);
+	rc = smscore_sendrequest_and_wait(coredev, pMsg, totalLen,
+			&coredev->gpio_get_level_done);
+
+	if (rc != 0) {
+		if (rc == -ETIME)
+			sms_err("smscore_gpio_get_level timeout");
+		else
+			sms_err("smscore_gpio_get_level error");
+	}
+	kfree(buffer);
+
+	/* Its a race between other gpio_get_level() and the copy of the single
+	 * global 'coredev->gpio_get_res' to  the function's variable 'level'
+	 */
+	*level = coredev->gpio_get_res;
+
+	return rc;
 }
 
 static int __init smscore_module_init(void)
diff -r 08e292f80f37 -r 749c11a362a9 linux/drivers/media/dvb/siano/smscoreapi.h
--- a/linux/drivers/media/dvb/siano/smscoreapi.h	Tue May 19 16:30:40 2009 +0300
+++ b/linux/drivers/media/dvb/siano/smscoreapi.h	Tue May 19 17:49:30 2009 +0300
@@ -550,7 +550,7 @@ struct SMSHOSTLIB_I2C_RES_ST {
 };
 
 
-struct smscore_gpio_config {
+struct smscore_config_gpio {
 #define SMS_GPIO_DIRECTION_INPUT  0
 #define SMS_GPIO_DIRECTION_OUTPUT 1
 	u8 direction;
@@ -574,6 +574,48 @@ struct smscore_gpio_config {
 #define SMS_GPIO_OUTPUTDRIVING_12mA 2
 #define SMS_GPIO_OUTPUTDRIVING_16mA 3
 	u8 outputdriving;
+};
+
+struct smscore_gpio_config {
+#define SMS_GPIO_DIRECTION_INPUT  0
+#define SMS_GPIO_DIRECTION_OUTPUT 1
+	u8 Direction;
+
+#define SMS_GPIO_PULLUPDOWN_NONE     0
+#define SMS_GPIO_PULLUPDOWN_PULLDOWN 1
+#define SMS_GPIO_PULLUPDOWN_PULLUP   2
+#define SMS_GPIO_PULLUPDOWN_KEEPER   3
+	u8 PullUpDown;
+
+#define SMS_GPIO_INPUT_CHARACTERISTICS_NORMAL  0
+#define SMS_GPIO_INPUT_CHARACTERISTICS_SCHMITT 1
+	u8 InputCharacteristics;
+
+#define SMS_GPIO_OUTPUT_SLEW_RATE_SLOW		1 /* 10xx */
+#define SMS_GPIO_OUTPUT_SLEW_RATE_FAST		0 /* 10xx */
+
+
+#define SMS_GPIO_OUTPUT_SLEW_RATE_0_45_V_NS	0 /* 11xx */
+#define SMS_GPIO_OUTPUT_SLEW_RATE_0_9_V_NS	1 /* 11xx */
+#define SMS_GPIO_OUTPUT_SLEW_RATE_1_7_V_NS	2 /* 11xx */
+#define SMS_GPIO_OUTPUT_SLEW_RATE_3_3_V_NS	3 /* 11xx */
+	u8 OutputSlewRate;
+
+#define SMS_GPIO_OUTPUT_DRIVING_S_4mA		0 /* 10xx */
+#define SMS_GPIO_OUTPUT_DRIVING_S_8mA		1 /* 10xx */
+#define SMS_GPIO_OUTPUT_DRIVING_S_12mA		2 /* 10xx */
+#define SMS_GPIO_OUTPUT_DRIVING_S_16mA		3 /* 10xx */
+
+#define SMS_GPIO_OUTPUT_DRIVING_1_5mA		0 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_2_8mA		1 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_4mA			2 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_7mA			3 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_10mA			4 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_11mA			5 /* 11xx */
+#define SMS_GPIO_OUTPUT_DRIVING_14mA			6 /* 11xx */
+#undef SMS_GPIO_OUTPUT_DRIVING_16mA
+#define SMS_GPIO_OUTPUT_DRIVING_16mA			7 /* 11xx */
+	u8 OutputDriving;
 };
 
 extern void smscore_registry_setmode(char *devpath, int mode);
@@ -619,9 +661,18 @@ extern void smscore_putbuffer(struct sms
 extern void smscore_putbuffer(struct smscore_device_t *coredev,
 			      struct smscore_buffer_t *cb);
 
+/* old GPIO managment */
 int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin,
-			   struct smscore_gpio_config *pinconfig);
+			   struct smscore_config_gpio *pinconfig);
 int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level);
+
+/* new GPIO managment */
+extern int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum,
+		struct smscore_gpio_config *pGpioConfig);
+extern int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum,
+		u8 NewLevel);
+extern int smscore_gpio_get_level(struct smscore_device_t *coredev, u8 PinNum,
+		u8 *level);
 
 void smscore_set_board_id(struct smscore_device_t *core, int id);
 int smscore_get_board_id(struct smscore_device_t *core);



      

             reply	other threads:[~2009-05-19 14:49 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-19 14:49 Uri Shkolnik [this message]
2009-05-19 16:13 ` [PATCH] [09051_43] Siano: Add new GPIO management interface Michael Krufky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=855967.12185.qm@web110807.mail.gq1.yahoo.com \
    --to=urishk@yahoo.com \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.