All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: unlisted-recipients:; (no To-header on input)
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
	Binghui Wang <wangbinghui@hisilicon.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Xiaowei Song <songxiaowei@hisilicon.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pci@vger.kernel.org
Subject: [PATCH v2 02/11] doc: bindings: kirin-pcie.txt: convert it to YAML
Date: Wed,  3 Feb 2021 08:01:46 +0100	[thread overview]
Message-ID: <8617cb4f27b1f4146b956686f0410e5fc3827379.1612335031.git.mchehab+huawei@kernel.org> (raw)
In-Reply-To: <cover.1612335031.git.mchehab+huawei@kernel.org>

Convert	the file into a	DT schema.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../bindings/pci/hisilicon,kirin-pcie.yaml    | 90 +++++++++++++++++++
 .../devicetree/bindings/pci/kirin-pcie.txt    | 50 -----------
 MAINTAINERS                                   |  2 +-
 3 files changed, 91 insertions(+), 51 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
 delete mode 100644 Documentation/devicetree/bindings/pci/kirin-pcie.txt

diff --git a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
new file mode 100644
index 000000000000..46f9f3f25dbc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/hisilicon,kirin-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Kirin SoCs PCIe host DT description
+
+maintainers:
+  - Xiaowei Song <songxiaowei@hisilicon.com>
+  - Binghui Wang <wangbinghui@hisilicon.com>
+
+description: |
+  Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
+  It shares common functions with the PCIe DesignWare core driver.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+#  - $ref: snps,pcie.yaml#
+
+properties:
+  compatible:
+    const: hisilicon,kirin960-pcie
+
+  reg:
+    description: |
+      Should contain rc_dbi, apb, phy, config registers location and length.
+
+  reg-names:
+    items:
+      - const: dbi          # controller configuration registers
+      - const: apb          # apb Ctrl register defined by Kirin
+      - const: phy          # apb PHY register defined by Kirin
+      - const: config       # PCIe configuration space registers
+
+  reset-gpios:
+    description: The GPIO to generate PCIe PERST# assert and deassert signal.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - reset-gpios
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/hi3660-clock.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie: pcie@f4000000 {
+        compatible = "hisilicon,kirin960-pcie";
+        reg = <0x0 0xf4000000 0x0 0x1000>,
+              <0x0 0xff3fe000 0x0 0x1000>,
+              <0x0 0xf3f20000 0x0 0x40000>,
+              <0x0 0xF4000000 0 0x2000>;
+        reg-names = "dbi","apb","phy", "config";
+        bus-range = <0x0  0x1>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        ranges = <0x02000000 0x0 0x00000000 0x0 0xf5000000 0x0 0x2000000>;
+        num-lanes = <1>;
+        #interrupt-cells = <1>;
+        interrupts = <0 283 4>;
+        interrupt-names = "msi";
+        interrupt-map-mask = <0xf800 0 0 7>;
+        interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+                 <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+                 <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+                 <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+                 <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+        clock-names = "pcie_phy_ref", "pcie_aux", "pcie_apb_phy",
+                      "pcie_apb_sys", "pcie_aclk";
+        reset-gpios = <&gpio11 1 0 >;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
deleted file mode 100644
index a38f8e38a67b..000000000000
--- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-HiSilicon Kirin SoCs PCIe host DT description
-
-Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
-It shares common functions with the PCIe DesignWare core driver and
-inherits common properties defined in
-Documentation/devicetree/bindings/pci/snps,pcie.yaml.
-
-Additional properties are described here:
-
-Required properties
-- compatible:
-	"hisilicon,kirin960-pcie" for PCIe of Kirin960 SoC
-- reg: Should contain rc_dbi, apb, phy, config registers location and length.
-- reg-names: Must include the following entries:
-  "dbi": controller configuration registers;
-  "apb": apb Ctrl register defined by Kirin;
-  "phy": apb PHY register defined by Kirin;
-  "config": PCIe configuration space registers.
-- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.
-
-Optional properties:
-
-Example based on kirin960:
-
-	pcie@f4000000 {
-		compatible = "hisilicon,kirin-pcie";
-		reg = <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000 0x0 0x1000>,
-		      <0x0 0xf3f20000 0x0 0x40000>, <0x0 0xF4000000 0 0x2000>;
-		reg-names = "dbi","apb","phy", "config";
-		bus-range = <0x0  0x1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x02000000 0x0 0x00000000 0x0 0xf5000000 0x0 0x2000000>;
-		num-lanes = <1>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0x0 0 0 1 &gic 0 0 0  282 4>,
-				<0x0 0 0 2 &gic 0 0 0  283 4>,
-				<0x0 0 0 3 &gic 0 0 0  284 4>,
-				<0x0 0 0 4 &gic 0 0 0  285 4>;
-		clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
-			 <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
-			 <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
-			 <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
-			 <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
-		clock-names = "pcie_phy_ref", "pcie_aux",
-			      "pcie_apb_phy", "pcie_apb_sys", "pcie_aclk";
-		reset-gpios = <&gpio11 1 0 >;
-	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 0bcba0d4994c..701d7115af74 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13817,7 +13817,7 @@ M:	Xiaowei Song <songxiaowei@hisilicon.com>
 M:	Binghui Wang <wangbinghui@hisilicon.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/pci/kirin-pcie.txt
+F:	Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
 F:	drivers/pci/controller/dwc/pcie-kirin.c
 
 PCIE DRIVER FOR HISILICON STB
-- 
2.29.2


  parent reply	other threads:[~2021-02-03  7:03 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-03  7:01 [PATCH v2 00/11] Add support for Hikey 970 PCIe Mauro Carvalho Chehab
2021-02-03  7:01 ` Mauro Carvalho Chehab
2021-02-03  7:01 ` Mauro Carvalho Chehab
2021-02-03  7:01 ` [PATCH v2 01/11] doc: bindings: PCI: designware-pcie.txt: convert it to YAML Mauro Carvalho Chehab
2021-02-03  7:01   ` Mauro Carvalho Chehab
2021-02-03  7:01   ` Mauro Carvalho Chehab
2021-02-04 15:20   ` Rob Herring
2021-02-04 15:20     ` Rob Herring
2021-02-04 15:20     ` Rob Herring
2021-02-03  7:01 ` Mauro Carvalho Chehab [this message]
2021-02-03  7:01 ` [PATCH v2 03/11] doc: bindings: add new parameters used by Kirin 970 Mauro Carvalho Chehab
2021-02-03  7:01 ` [PATCH v2 04/11] PCI: dwc: pcie-kirin: add support for Kirin 970 PCIe controller Mauro Carvalho Chehab
2021-02-03  9:32   ` kernel test robot
2021-02-03  9:32     ` kernel test robot
2021-02-03 14:34   ` Rob Herring
2021-02-03 17:49     ` Mauro Carvalho Chehab
2021-03-26  8:39     ` Mauro Carvalho Chehab
2021-03-26  8:51       ` Manivannan Sadhasivam
2021-03-26 10:04         ` Mauro Carvalho Chehab
2021-07-05 14:54     ` Mauro Carvalho Chehab
2021-02-03  7:01 ` [PATCH v2 05/11] PCI: dwc: pcie-kirin: simplify error handling logic Mauro Carvalho Chehab
2021-02-03  7:01 ` [PATCH v2 06/11] PCI: dwc: pcie-kirin: simplify Kirin 970 get resource logic Mauro Carvalho Chehab
2021-02-03  7:01 ` [PATCH v2 07/11] PCI: dwc: pcie-kirin: place common init code altogether Mauro Carvalho Chehab
2021-02-03  7:01 ` [PATCH v2 08/11] PCI: dwc: pcie-kirin: add support for a regulator Mauro Carvalho Chehab
2021-02-03  7:01 ` [PATCH v2 09/11] PCI: dwc: pcie-kirin: allow using multiple reset GPIOs Mauro Carvalho Chehab
2021-02-03 13:46   ` Mark Brown
2021-02-03 17:28     ` Mauro Carvalho Chehab
2021-02-03 15:18   ` Krzysztof Wilczyński
2021-02-03 17:50     ` Mauro Carvalho Chehab
2021-02-03  7:01 ` [PATCH v2 10/11] PCI: dwc: pcie-kirin: add support for clkreq GPIOs Mauro Carvalho Chehab
2021-02-03  7:01 ` [PATCH v2 11/11] pci: dwc: pcie-kirin: cleanup kirin970_pcie_get_eyeparam() Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8617cb4f27b1f4146b956686f0410e5fc3827379.1612335031.git.mchehab+huawei@kernel.org \
    --to=mchehab+huawei@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=songxiaowei@hisilicon.com \
    --cc=wangbinghui@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.