From: Alexandre TORGUE <alexandre.torgue@foss.st.com>
To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
Kevin Hilman <khilman@baylibre.com>, SoC Team <soc@kernel.org>,
arm-soc <arm@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Marek Vasut <marex@denx.de>,
Ahmad Fatoum <a.fatoum@pengutronix.de>,
Alexandre TORGUE <alexandre.torgue@st.com>
Subject: [GIT PULL] STM32 DT changes for v5.11 #1
Date: Fri, 27 Nov 2020 09:54:22 +0100 [thread overview]
Message-ID: <873c17a5-28d5-9261-f691-1b917611c932@foss.st.com> (raw)
Hi ARM SoC maintainers,
Please consider this first round of STM32 DT updates for v5.11. As usual
main changed concern MPU part. Various fixes have been done, a new board
has been added for DH and USB type C support has been added for ST DK
boards.
Due to company IT changes, for upstream "process" my mail address in no
longer alexandre.torgue@st.com but alexandre.torgue@foss.st.com. Let me
know if it causes issue for tag signature. On my side I updated GPG key
with this new address and it seems ok.
regards
Alex
The following changes since commit f4c7fa39415da6db1fa0bc26162ac23a0fbae8bb:
ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM (2020-11-09
14:36:50 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git
tags/stm32-dt-for-v5.11-1
for you to fetch changes up to 6660e2445523a57410de008a9b137d2c0a66e94a:
ARM: dts: stm32: lxa-mc1: add OSD32MP15x to list of compatibles
(2020-11-26 14:42:41 +0100)
----------------------------------------------------------------
STM32 DT updates for v5.11, round 1
Highlights:
----------
MCU part:
-Fix dmamux reg property (length) on stm32h743.
-Explicitly set DCMI bus type on stm32429i eval board.
MPU part:
-Enable FIFO mode with half-full threshold for DCMI.
-Harmonize EHCI/OHCI nodes.
-Move SDMMC IP version to v2.0 to get features improvements.
-Add LP-timer wakeup support.
-Enable crypto/hash/crc support.
-Explicitly set DCMI bus type on stm32mp157 eval board.
-Add USB type-c controller (STUSB1600) on stm32mp15 DK boards
(It is connected to I2C4).
-Fix dmamux reg property (length) on stm32mp151.
-Optimize USB OTG FIFO sizes on stm32mp151.
-Declare tamp node also as "simple-mfd".
-LXA:
-Document Octavo vendor-prefixes yaml file.
-Document lxa,stm32mp157c-mc1 in STM32 yaml file.
-DH:
-Connect PHY IRQ line on DH SoM.
-Add KS8851 Ethernet support on DHCOM which is mapped to FMC2.
-Document all DH compatible strings in STM32 yaml file.
-Add DHCOM based PicoITX board. This board embeds ethernet port,
USB, CAN LEDS and a custom board-to-board connector.
----------------------------------------------------------------
Ahmad Fatoum (5):
dt-bindings: arm: stm32: add simple-mfd compatible for tamp node
ARM: dts: stm32: support child mfd cells for the stm32mp1 TAMP syscon
dt-bindings: vendor-prefixes: document Octavo Systems oct prefix
dt-bindings: arm: stm32: add extra SiP compatible for
lxa,stm32mp157c-mc1
ARM: dts: stm32: lxa-mc1: add OSD32MP15x to list of compatibles
Amelie Delaunay (7):
dt-bindings: connector: add typec-power-opmode property to
usb-connector
dt-bindings: usb: Add DT bindings for STUSB160x Type-C controller
ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx
ARM: dts: stm32: fix mdma1 clients channel priority level on
stm32mp151
ARM: dts: stm32: fix dmamux reg property on stm32mp151
ARM: dts: stm32: fix dmamux reg property on stm32h743
ARM: dts: stm32: adjust USB OTG gadget fifo sizes in stm32mp151
Arnaud Pouliquen (1):
ARM: dts: stm32: update stm32mp151 for remote proc
synchronization support
Fabrice Gasnier (2):
ARM: dts: stm32: Add LP timer irqs on stm32mp151
ARM: dts: stm32: Add LP timer wakeup-source on stm32mp151
Hugues Fruchet (3):
ARM: dts: stm32: fix DCMI DMA features on stm32mp15 family
ARM: dts: stm32: set bus-type in DCMI endpoint for
stm32mp157c-ev1 board
ARM: dts: stm32: set bus-type in DCMI endpoint for stm32429i-eval
board
Lionel Debieve (2):
ARM: dts: stm32: enable HASH by default on stm32mp15
ARM: dts: stm32: enable CRYP by default on stm32mp15
Marek Vasut (5):
ARM: dts: stm32: Connect PHY IRQ line on DH STM32MP1 SoM
ARM: dts: stm32: Add alternate pinmux for FMC EBI bus
ARM: dts: stm32: Add KS8851 on FMC2 to STM32MP1 DHCOM
dt-bindings: arm: stm32: Add compatible strings for DH SoMs and
boards
ARM: dts: stm32: Add DHCOM based PicoITX board
Nicolas Toromanoff (1):
ARM: dts: stm32: enable CRC1 by default on stm32mp15
Patrick Delaunay (1):
ARM: dts: stm32: reorder spi4 within stm32mp15-pinctrl
Serge Semin (1):
ARM: dts: stm32: Harmonize EHCI/OHCI DT nodes name on stm32mp15
Yann Gautier (1):
ARM: dts: stm32: update sdmmc IP version for STM32MP15
.../bindings/arm/stm32/st,stm32-syscon.yaml | 4 +
.../devicetree/bindings/arm/stm32/stm32.yaml | 23 +++-
.../bindings/connector/usb-connector.yaml | 24 ++++
.../devicetree/bindings/usb/st,stusb160x.yaml | 87 +++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/stm32429i-eval.dts | 1 +
arch/arm/boot/dts/stm32h743.dtsi | 2 +-
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 90 +++++++++++--
arch/arm/boot/dts/stm32mp151.dtsi | 41 ++++--
arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts | 35 +++++
arch/arm/boot/dts/stm32mp157c-dk2.dts | 4 +
arch/arm/boot/dts/stm32mp157c-ed1.dts | 12 ++
arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 +
arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts | 2 +-
arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi | 143
+++++++++++++++++++++
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 37 ++++++
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 38 ++++++
18 files changed, 517 insertions(+), 30 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/st,stusb160x.yaml
create mode 100644 arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts
create mode 100644 arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
next reply other threads:[~2020-11-27 8:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-27 8:54 Alexandre TORGUE [this message]
2020-11-27 17:10 ` [GIT PULL] STM32 DT changes for v5.11 #1 patchwork-bot+linux-soc
2020-11-27 19:42 ` Arnd Bergmann
2020-12-02 11:00 ` Alexandre TORGUE
2020-12-02 13:32 ` Arnd Bergmann
2020-12-07 16:20 ` Alexandre TORGUE
2020-12-07 16:31 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=873c17a5-28d5-9261-f691-1b917611c932@foss.st.com \
--to=alexandre.torgue@foss.st.com \
--cc=a.fatoum@pengutronix.de \
--cc=alexandre.torgue@st.com \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=khilman@baylibre.com \
--cc=marex@denx.de \
--cc=mcoquelin.stm32@gmail.com \
--cc=olof@lixom.net \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.