All of lore.kernel.org
 help / color / mirror / Atom feed
From: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
To: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-ext4@vger.kernel.org, linux-fsdevel@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2] ext4/jbd2: Fix FS corruption possibility on umount path
Date: Sun, 28 Feb 2016 23:24:51 +0900	[thread overview]
Message-ID: <87a8mk6hfw.fsf@mail.parknet.co.jp> (raw)

On umount path, jbd2_journal_destroy() writes latest transaction ID
(->j_tail_sequence) to be used at next mount.

The bug is that ->j_tail_sequence is not holding latest transaction ID
in some cases. So, at next mount, there is chance to conflict with
remaining (not overwritten yet) transactions.

	mount (id=10)
	write transaction (id=11)
	write transaction (id=12)
	umount (id=10) <= the bug doesn't write latest ID

	mount (id=10)
	write transaction (id=11)
	crash

	mount
	[recovery process]
		transaction (id=11)
		transaction (id=12) <= valid transaction ID, but old commit
                                       must not replay

Like above, this bug become the cause of recovery failure, or FS
corruption.

So why ->j_tail_sequence doesn't point latest ID?

Because if checkpoint transactions was reclaimed by memory pressure
(i.e. bdev_try_to_free_page()), then ->j_tail_sequence is not updated.
(And another case is, __jbd2_journal_clean_checkpoint_list() is called
with empty transaction.)

So in above cases, ->j_tail_sequence is not pointing latest
transaction ID at umount path. Plus, REQ_FLUSH for checkpoint is not
done too.

So, to fix this problem with minimum changes, this patch updates
->j_tail_sequence, and issue REQ_FLUSH.  (With more complex changes,
some optimizations would be possible to avoid unnecessary REQ_FLUSH
for example though.)

BTW,

	journal->j_tail_sequence =
		++journal->j_transaction_sequence;

Increment of ->j_transaction_sequence seems to be unnecessary, but
ext3 does this.

v2: Fix "make htmldocs" warning

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: stable@vger.kernel.org
---

 fs/jbd2/journal.c |   17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff -puN fs/jbd2/journal.c~ext4-umount-fix fs/jbd2/journal.c
--- linux/fs/jbd2/journal.c~ext4-umount-fix	2016-02-28 10:16:41.997093008 +0900
+++ linux-hirofumi/fs/jbd2/journal.c	2016-02-28 23:01:25.865647233 +0900
@@ -1408,11 +1408,12 @@ out:
 /**
  * jbd2_mark_journal_empty() - Mark on disk journal as empty.
  * @journal: The journal to update.
+ * @write_op: With which operation should we write the journal sb
  *
  * Update a journal's dynamic superblock fields to show that journal is empty.
  * Write updated superblock to disk waiting for IO to complete.
  */
-static void jbd2_mark_journal_empty(journal_t *journal)
+static void jbd2_mark_journal_empty(journal_t *journal, int write_op)
 {
 	journal_superblock_t *sb = journal->j_superblock;
 
@@ -1430,7 +1431,7 @@ static void jbd2_mark_journal_empty(jour
 	sb->s_start    = cpu_to_be32(0);
 	read_unlock(&journal->j_state_lock);
 
-	jbd2_write_superblock(journal, WRITE_FUA);
+	jbd2_write_superblock(journal, write_op);
 
 	/* Log is no longer empty */
 	write_lock(&journal->j_state_lock);
@@ -1716,7 +1717,13 @@ int jbd2_journal_destroy(journal_t *jour
 	if (journal->j_sb_buffer) {
 		if (!is_journal_aborted(journal)) {
 			mutex_lock(&journal->j_checkpoint_mutex);
-			jbd2_mark_journal_empty(journal);
+
+			write_lock(&journal->j_state_lock);
+			journal->j_tail_sequence =
+				++journal->j_transaction_sequence;
+			write_unlock(&journal->j_state_lock);
+
+			jbd2_mark_journal_empty(journal, WRITE_FLUSH_FUA);
 			mutex_unlock(&journal->j_checkpoint_mutex);
 		} else
 			err = -EIO;
@@ -1975,7 +1982,7 @@ int jbd2_journal_flush(journal_t *journa
 	 * the magic code for a fully-recovered superblock.  Any future
 	 * commits of data to the journal will restore the current
 	 * s_start value. */
-	jbd2_mark_journal_empty(journal);
+	jbd2_mark_journal_empty(journal, WRITE_FUA);
 	mutex_unlock(&journal->j_checkpoint_mutex);
 	write_lock(&journal->j_state_lock);
 	J_ASSERT(!journal->j_running_transaction);
@@ -2021,7 +2028,7 @@ int jbd2_journal_wipe(journal_t *journal
 	if (write) {
 		/* Lock to make assertions happy... */
 		mutex_lock(&journal->j_checkpoint_mutex);
-		jbd2_mark_journal_empty(journal);
+		jbd2_mark_journal_empty(journal, WRITE_FUA);
 		mutex_unlock(&journal->j_checkpoint_mutex);
 	}
 
_

-- 
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>

                 reply	other threads:[~2016-02-28 14:55 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87a8mk6hfw.fsf@mail.parknet.co.jp \
    --to=hirofumi@mail.parknet.co.jp \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tytso@mit.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.