From: Geert Uytterhoeven <geert+renesas@glider.be>
To: "Magnus Damm" <magnus.damm@gmail.com>,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Cc: linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH] arm64: dts: renesas: r8a779a0: Restore sort order
Date: Wed, 23 Jun 2021 16:59:25 +0200 [thread overview]
Message-ID: <8d68a7ce449aaf90a88e69397dbe0e9c467d5726.1624460175.git.geert+renesas@glider.be> (raw)
The thermal node was inserted at the wrong place, breaking sort order
(sort by unit address, but group nodes of the same type).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Probably it was my fault, not Niklas' ;-)
To be queued in renesas-devel for v5.15.
arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 26 +++++++++++------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index a7dfade1801a87db..3676b2bd3d646cdb 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -327,6 +327,19 @@ sysc: system-controller@e6180000 {
#power-domain-cells = <1>;
};
+ tsc: thermal@e6190000 {
+ compatible = "renesas,r8a779a0-thermal";
+ reg = <0 0xe6190000 0 0x200>,
+ <0 0xe6198000 0 0x200>,
+ <0 0xe61a0000 0 0x200>,
+ <0 0xe61a8000 0 0x200>,
+ <0 0xe61b0000 0 0x200>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ #thermal-sensor-cells = <1>;
+ };
+
tmu0: timer@e61e0000 {
compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
reg = <0 0xe61e0000 0 0x30>;
@@ -392,19 +405,6 @@ tmu4: timer@ffc00000 {
status = "disabled";
};
- tsc: thermal@e6190000 {
- compatible = "renesas,r8a779a0-thermal";
- reg = <0 0xe6190000 0 0x200>,
- <0 0xe6198000 0 0x200>,
- <0 0xe61a0000 0 0x200>,
- <0 0xe61a8000 0 0x200>,
- <0 0xe61b0000 0 0x200>;
- clocks = <&cpg CPG_MOD 919>;
- power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 919>;
- #thermal-sensor-cells = <1>;
- };
-
i2c0: i2c@e6500000 {
compatible = "renesas,i2c-r8a779a0",
"renesas,rcar-gen3-i2c";
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: "Magnus Damm" <magnus.damm@gmail.com>,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Cc: linux-renesas-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH] arm64: dts: renesas: r8a779a0: Restore sort order
Date: Wed, 23 Jun 2021 16:59:25 +0200 [thread overview]
Message-ID: <8d68a7ce449aaf90a88e69397dbe0e9c467d5726.1624460175.git.geert+renesas@glider.be> (raw)
The thermal node was inserted at the wrong place, breaking sort order
(sort by unit address, but group nodes of the same type).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Probably it was my fault, not Niklas' ;-)
To be queued in renesas-devel for v5.15.
arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 26 +++++++++++------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index a7dfade1801a87db..3676b2bd3d646cdb 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -327,6 +327,19 @@ sysc: system-controller@e6180000 {
#power-domain-cells = <1>;
};
+ tsc: thermal@e6190000 {
+ compatible = "renesas,r8a779a0-thermal";
+ reg = <0 0xe6190000 0 0x200>,
+ <0 0xe6198000 0 0x200>,
+ <0 0xe61a0000 0 0x200>,
+ <0 0xe61a8000 0 0x200>,
+ <0 0xe61b0000 0 0x200>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ #thermal-sensor-cells = <1>;
+ };
+
tmu0: timer@e61e0000 {
compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
reg = <0 0xe61e0000 0 0x30>;
@@ -392,19 +405,6 @@ tmu4: timer@ffc00000 {
status = "disabled";
};
- tsc: thermal@e6190000 {
- compatible = "renesas,r8a779a0-thermal";
- reg = <0 0xe6190000 0 0x200>,
- <0 0xe6198000 0 0x200>,
- <0 0xe61a0000 0 0x200>,
- <0 0xe61a8000 0 0x200>,
- <0 0xe61b0000 0 0x200>;
- clocks = <&cpg CPG_MOD 919>;
- power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
- resets = <&cpg 919>;
- #thermal-sensor-cells = <1>;
- };
-
i2c0: i2c@e6500000 {
compatible = "renesas,i2c-r8a779a0",
"renesas,rcar-gen3-i2c";
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-06-23 14:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-23 14:59 Geert Uytterhoeven [this message]
2021-06-23 14:59 ` [PATCH] arm64: dts: renesas: r8a779a0: Restore sort order Geert Uytterhoeven
2021-06-23 18:13 ` Niklas Söderlund
2021-06-23 18:13 ` Niklas Söderlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8d68a7ce449aaf90a88e69397dbe0e9c467d5726.1624460175.git.geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=niklas.soderlund+renesas@ragnatech.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.