[Qemu-devel] [PULL 6/8] test: Postcopy

[Amit Shah <amit.shah@redhat.com>]

From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>

This is a postcopy test (x86 only) that actually runs the guest
and checks the memory contents.

The test runs from an x86 boot block with the hex embedded in the test;
the source for this is:

...........

.code16
.org 0x7c00
	.file	"fill.s"
	.text
	.globl	start
	.type	start, @function
start:             # at 0x7c00 ?
        cli
        lgdt gdtdesc
        mov $1,%eax
        mov %eax,%cr0  # Protected mode enable
        data32 ljmp $8,$0x7c20

.org 0x7c20
.code32
        # A20 enable - not sure I actually need this
        inb $0x92,%al
        or  $2,%al
        outb %al, $0x92

        # set up DS for the whole of RAM (needed on KVM)
        mov $16,%eax
        mov %eax,%ds

        mov $65,%ax
        mov $0x3f8,%dx
        outb %al,%dx

        # bl keeps a counter so we limit the output speed
        mov $0, %bl
mainloop:
        # Start from 1MB
        mov $(1024*1024),%eax
innerloop:
        incb (%eax)
        add $4096,%eax
        cmp $(100*1024*1024),%eax
        jl innerloop

        inc %bl
        jnz mainloop

        mov $66,%ax
        mov $0x3f8,%dx
        outb %al,%dx

	jmp mainloop

        # GDT magic from old (GPLv2)  Grub startup.S
        .p2align        2       /* force 4-byte alignment */
gdt:
        .word   0, 0
        .byte   0, 0, 0, 0

        /* -- code segment --
         * base = 0x00000000, limit = 0xFFFFF (4 KiB Granularity), present
         * type = 32bit code execute/read, DPL = 0
         */
        .word   0xFFFF, 0
        .byte   0, 0x9A, 0xCF, 0

        /* -- data segment --
         * base = 0x00000000, limit 0xFFFFF (4 KiB Granularity), present
         * type = 32 bit data read/write, DPL = 0
         */
        .word   0xFFFF, 0
        .byte   0, 0x92, 0xCF, 0

gdtdesc:
        .word   0x27                    /* limit */
        .long   gdt                     /* addr */

/* I'm a bootable disk */
.org 0x7dfe
        .byte 0x55
        .byte 0xAA

...........

and that can be assembled by the following magic:
    as --32 -march=i486 fill.s -o fill.o
    objcopy -O binary fill.o fill.boot
    dd if=fill.boot of=bootsect bs=256 count=2 skip=124
    xxd -i bootsect

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <1465555776-23286-5-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
---
 tests/Makefile.include |   2 +
 tests/postcopy-test.c  | 455 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 457 insertions(+)
 create mode 100644 tests/postcopy-test.c

diff --git a/tests/Makefile.include b/tests/Makefile.include
index a3e20e3..e8ec7e4 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -228,6 +228,7 @@ endif
 check-qtest-i386-y += tests/test-netfilter$(EXESUF)
 check-qtest-i386-y += tests/test-filter-mirror$(EXESUF)
 check-qtest-i386-y += tests/test-filter-redirector$(EXESUF)
+check-qtest-i386-y += tests/postcopy-test$(EXESUF)
 check-qtest-x86_64-y = $(check-qtest-i386-y)
 gcov-files-i386-y += i386-softmmu/hw/timer/mc146818rtc.c
 gcov-files-x86_64-y = $(subst i386-softmmu/,x86_64-softmmu/,$(gcov-files-i386-y))
@@ -587,6 +588,7 @@ tests/usb-hcd-uhci-test$(EXESUF): tests/usb-hcd-uhci-test.o $(libqos-usb-obj-y)
 tests/usb-hcd-ehci-test$(EXESUF): tests/usb-hcd-ehci-test.o $(libqos-usb-obj-y)
 tests/usb-hcd-xhci-test$(EXESUF): tests/usb-hcd-xhci-test.o $(libqos-usb-obj-y)
 tests/pc-cpu-test$(EXESUF): tests/pc-cpu-test.o
+tests/postcopy-test$(EXESUF): tests/postcopy-test.o
 tests/vhost-user-test$(EXESUF): tests/vhost-user-test.o qemu-char.o qemu-timer.o $(qtest-obj-y) $(test-io-obj-y)
 tests/qemu-iotests/socket_scm_helper$(EXESUF): tests/qemu-iotests/socket_scm_helper.o
 tests/test-qemu-opts$(EXESUF): tests/test-qemu-opts.o $(test-util-obj-y)
diff --git a/tests/postcopy-test.c b/tests/postcopy-test.c
new file mode 100644
index 0000000..1e49213
--- /dev/null
+++ b/tests/postcopy-test.c
@@ -0,0 +1,455 @@
+/*
+ * QTest testcase for postcopy
+ *
+ * Copyright (c) 2016 Red Hat, Inc. and/or its affiliates
+ *   based on the vhost-user-test.c that is:
+ *      Copyright (c) 2014 Virtual Open Systems Sarl.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include <glib.h>
+
+#include "libqtest.h"
+#include "qemu/option.h"
+#include "qemu/range.h"
+#include "sysemu/char.h"
+#include "sysemu/sysemu.h"
+
+#include <qemu/sockets.h>
+
+#if defined(__linux__)
+#include <sys/mman.h>
+#include <sys/syscall.h>
+#include <sys/vfs.h>
+#endif
+
+#if defined(__linux__) && defined(__NR_userfaultfd) && defined(CONFIG_EVENTFD)
+#include <sys/eventfd.h>
+#include <sys/ioctl.h>
+#include <linux/userfaultfd.h>
+
+const unsigned start_address = 1024 * 1024;
+const unsigned end_address = 100 * 1024 * 1024;
+bool got_stop;
+
+static bool ufd_version_check(void)
+{
+    struct uffdio_api api_struct;
+    uint64_t ioctl_mask;
+
+    int ufd = ufd = syscall(__NR_userfaultfd, O_CLOEXEC);
+
+    if (ufd == -1) {
+        g_test_message("Skipping test: userfaultfd not available");
+        return false;
+    }
+
+    api_struct.api = UFFD_API;
+    api_struct.features = 0;
+    if (ioctl(ufd, UFFDIO_API, &api_struct)) {
+        g_test_message("Skipping test: UFFDIO_API failed");
+        return false;
+    }
+
+    ioctl_mask = (__u64)1 << _UFFDIO_REGISTER |
+                 (__u64)1 << _UFFDIO_UNREGISTER;
+    if ((api_struct.ioctls & ioctl_mask) != ioctl_mask) {
+        g_test_message("Skipping test: Missing userfault feature");
+        return false;
+    }
+
+    return true;
+}
+
+#else
+static bool ufd_version_check(void)
+{
+    g_test_message("Skipping test: Userfault not available (builtdtime)");
+    return false;
+}
+
+#endif
+
+static const char *tmpfs;
+
+/* A simple PC boot sector that modifies memory (1-100MB) quickly
+ * outputing a 'B' every so often if it's still running.
+ */
+unsigned char bootsect[] = {
+  0xfa, 0x0f, 0x01, 0x16, 0x74, 0x7c, 0x66, 0xb8, 0x01, 0x00, 0x00, 0x00,
+  0x0f, 0x22, 0xc0, 0x66, 0xea, 0x20, 0x7c, 0x00, 0x00, 0x08, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe4, 0x92, 0x0c, 0x02,
+  0xe6, 0x92, 0xb8, 0x10, 0x00, 0x00, 0x00, 0x8e, 0xd8, 0x66, 0xb8, 0x41,
+  0x00, 0x66, 0xba, 0xf8, 0x03, 0xee, 0xb3, 0x00, 0xb8, 0x00, 0x00, 0x10,
+  0x00, 0xfe, 0x00, 0x05, 0x00, 0x10, 0x00, 0x00, 0x3d, 0x00, 0x00, 0x40,
+  0x06, 0x7c, 0xf2, 0xfe, 0xc3, 0x75, 0xe9, 0x66, 0xb8, 0x42, 0x00, 0x66,
+  0xba, 0xf8, 0x03, 0xee, 0xeb, 0xde, 0x66, 0x90, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x9a, 0xcf, 0x00,
+  0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0xcf, 0x00, 0x27, 0x00, 0x5c, 0x7c,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xaa
+};
+
+/*
+ * Wait for some output in the serial output file,
+ * we get an 'A' followed by an endless string of 'B's
+ * but on the destination we won't have the A.
+ */
+static void wait_for_serial(const char *side)
+{
+    char *serialpath = g_strdup_printf("%s/%s", tmpfs, side);
+    FILE *serialfile = fopen(serialpath, "r");
+
+    do {
+        int readvalue = fgetc(serialfile);
+
+        switch (readvalue) {
+        case 'A':
+            /* Fine */
+            break;
+
+        case 'B':
+            /* It's alive! */
+            fclose(serialfile);
+            g_free(serialpath);
+            return;
+
+        case EOF:
+            fseek(serialfile, 0, SEEK_SET);
+            usleep(1000);
+            break;
+
+        default:
+            fprintf(stderr, "Unexpected %d on %s serial\n", readvalue, side);
+            g_assert_not_reached();
+        }
+    } while (true);
+}
+
+/*
+ * Events can get in the way of responses we are actually waiting for.
+ */
+static QDict *return_or_event(QDict *response)
+{
+    const char *event_string;
+    if (!qdict_haskey(response, "event")) {
+        return response;
+    }
+
+    /* OK, it was an event */
+    event_string = qdict_get_str(response, "event");
+    if (!strcmp(event_string, "STOP")) {
+        got_stop = true;
+    }
+    QDECREF(response);
+    return return_or_event(qtest_qmp_receive(global_qtest));
+}
+
+
+/*
+ * It's tricky to use qemu's migration event capability with qtest,
+ * events suddenly appearing confuse the qmp()/hmp() responses.
+ * so wait for a couple of passes to have happened before
+ * going postcopy.
+ */
+
+static uint64_t get_migration_pass(void)
+{
+    QDict *rsp, *rsp_return, *rsp_ram;
+    uint64_t result;
+
+    rsp = return_or_event(qmp("{ 'execute': 'query-migrate' }"));
+    rsp_return = qdict_get_qdict(rsp, "return");
+    if (!qdict_haskey(rsp_return, "ram")) {
+        /* Still in setup */
+        result = 0;
+    } else {
+        rsp_ram = qdict_get_qdict(rsp_return, "ram");
+        result = qdict_get_try_int(rsp_ram, "dirty-sync-count", 0);
+        QDECREF(rsp);
+    }
+    return result;
+}
+
+static void wait_for_migration_complete(void)
+{
+    QDict *rsp, *rsp_return;
+    bool completed;
+
+    do {
+        const char *status;
+
+        rsp = return_or_event(qmp("{ 'execute': 'query-migrate' }"));
+        rsp_return = qdict_get_qdict(rsp, "return");
+        status = qdict_get_str(rsp_return, "status");
+        completed = strcmp(status, "completed") == 0;
+        g_assert_cmpstr(status, !=,  "failed");
+        QDECREF(rsp);
+        usleep(1000 * 100);
+    } while (!completed);
+}
+
+static void wait_for_migration_pass(void)
+{
+    uint64_t initial_pass = get_migration_pass();
+    uint64_t pass;
+
+    /* Wait for the 1st sync */
+    do {
+        initial_pass = get_migration_pass();
+        if (got_stop || initial_pass) {
+            break;
+        }
+        usleep(1000 * 100);
+    } while (true);
+
+    do {
+        usleep(1000 * 100);
+        pass = get_migration_pass();
+    } while (pass == initial_pass && !got_stop);
+}
+
+static void check_guests_ram(void)
+{
+    /* Our ASM test will have been incrementing one byte from each page from
+     * 1MB to <100MB in order.
+     * This gives us a constraint that any page's byte should be equal or less
+     * than the previous pages byte (mod 256); and they should all be equal
+     * except for one transition at the point where we meet the incrementer.
+     * (We're running this with the guest stopped).
+     */
+    unsigned address;
+    uint8_t first_byte;
+    uint8_t last_byte;
+    bool hit_edge = false;
+    bool bad = false;
+
+    qtest_memread(global_qtest, start_address, &first_byte, 1);
+    last_byte = first_byte;
+
+    for (address = start_address + 4096; address < end_address; address += 4096)
+    {
+        uint8_t b;
+        qtest_memread(global_qtest, address, &b, 1);
+        if (b != last_byte) {
+            if (((b + 1) % 256) == last_byte && !hit_edge) {
+                /* This is OK, the guest stopped at the point of
+                 * incrementing the previous page but didn't get
+                 * to us yet.
+                 */
+                hit_edge = true;
+            } else {
+                fprintf(stderr, "Memory content inconsistency at %x"
+                                " first_byte = %x last_byte = %x current = %x"
+                                " hit_edge = %x\n",
+                                address, first_byte, last_byte, b, hit_edge);
+                bad = true;
+            }
+        }
+        last_byte = b;
+    }
+    g_assert_false(bad);
+}
+
+static void cleanup(const char *filename)
+{
+    char *path = g_strdup_printf("%s/%s", tmpfs, filename);
+
+    unlink(path);
+}
+
+static void test_migrate(void)
+{
+    char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs);
+    QTestState *global = global_qtest, *from, *to;
+    unsigned char dest_byte_a, dest_byte_b, dest_byte_c, dest_byte_d;
+    gchar *cmd;
+    QDict *rsp;
+
+    char *bootpath = g_strdup_printf("%s/bootsect", tmpfs);
+    FILE *bootfile = fopen(bootpath, "wb");
+
+    got_stop = false;
+    g_assert_cmpint(fwrite(bootsect, 512, 1, bootfile), ==, 1);
+    fclose(bootfile);
+
+    cmd = g_strdup_printf("-machine accel=kvm:tcg -m 150M"
+                          " -name pcsource,debug-threads=on"
+                          " -serial file:%s/src_serial"
+                          " -drive file=%s,format=raw",
+                          tmpfs, bootpath);
+    from = qtest_start(cmd);
+    g_free(cmd);
+
+    cmd = g_strdup_printf("-machine accel=kvm:tcg -m 150M"
+                          " -name pcdest,debug-threads=on"
+                          " -serial file:%s/dest_serial"
+                          " -drive file=%s,format=raw"
+                          " -incoming %s",
+                          tmpfs, bootpath, uri);
+    to = qtest_init(cmd);
+    g_free(cmd);
+
+    global_qtest = from;
+    rsp = qmp("{ 'execute': 'migrate-set-capabilities',"
+                  "'arguments': { "
+                      "'capabilities': [ {"
+                          "'capability': 'postcopy-ram',"
+                          "'state': true } ] } }");
+    g_assert(qdict_haskey(rsp, "return"));
+    QDECREF(rsp);
+
+    global_qtest = to;
+    rsp = qmp("{ 'execute': 'migrate-set-capabilities',"
+                  "'arguments': { "
+                      "'capabilities': [ {"
+                          "'capability': 'postcopy-ram',"
+                          "'state': true } ] } }");
+    g_assert(qdict_haskey(rsp, "return"));
+    QDECREF(rsp);
+
+    /* We want to pick a speed slow enough that the test completes
+     * quickly, but that it doesn't complete precopy even on a slow
+     * machine, so also set the downtime.
+     */
+    global_qtest = from;
+    rsp = qmp("{ 'execute': 'migrate_set_speed',"
+              "'arguments': { 'value': 100000000 } }");
+    g_assert(qdict_haskey(rsp, "return"));
+    QDECREF(rsp);
+
+    /* 1ms downtime - it should never finish precopy */
+    rsp = qmp("{ 'execute': 'migrate_set_downtime',"
+              "'arguments': { 'value': 0.001 } }");
+    g_assert(qdict_haskey(rsp, "return"));
+    QDECREF(rsp);
+
+
+    /* Wait for the first serial output from the source */
+    wait_for_serial("src_serial");
+
+    cmd = g_strdup_printf("{ 'execute': 'migrate',"
+                          "'arguments': { 'uri': '%s' } }",
+                          uri);
+    rsp = qmp(cmd);
+    g_free(cmd);
+    g_assert(qdict_haskey(rsp, "return"));
+    QDECREF(rsp);
+
+    wait_for_migration_pass();
+
+    rsp = return_or_event(qmp("{ 'execute': 'migrate-start-postcopy' }"));
+    g_assert(qdict_haskey(rsp, "return"));
+    QDECREF(rsp);
+
+    if (!got_stop) {
+        qmp_eventwait("STOP");
+    }
+
+    global_qtest = to;
+    qmp_eventwait("RESUME");
+
+    wait_for_serial("dest_serial");
+    global_qtest = from;
+    wait_for_migration_complete();
+
+    qtest_quit(from);
+
+    global_qtest = to;
+
+    qtest_memread(to, start_address, &dest_byte_a, 1);
+
+    /* Destination still running, wait for a byte to change */
+    do {
+        qtest_memread(to, start_address, &dest_byte_b, 1);
+        usleep(10 * 1000);
+    } while (dest_byte_a == dest_byte_b);
+
+    qmp("{ 'execute' : 'stop'}");
+    /* With it stopped, check nothing changes */
+    qtest_memread(to, start_address, &dest_byte_c, 1);
+    sleep(1);
+    qtest_memread(to, start_address, &dest_byte_d, 1);
+    g_assert_cmpint(dest_byte_c, ==, dest_byte_d);
+
+    check_guests_ram();
+
+    qtest_quit(to);
+    g_free(uri);
+
+    global_qtest = global;
+
+    cleanup("bootsect");
+    cleanup("migsocket");
+    cleanup("src_serial");
+    cleanup("dest_serial");
+}
+
+int main(int argc, char **argv)
+{
+    char template[] = "/tmp/postcopy-test-XXXXXX";
+    int ret;
+
+    g_test_init(&argc, &argv, NULL);
+
+    if (!ufd_version_check()) {
+        return 0;
+    }
+
+    tmpfs = mkdtemp(template);
+    if (!tmpfs) {
+        g_test_message("mkdtemp on path (%s): %s\n", template, strerror(errno));
+    }
+    g_assert(tmpfs);
+
+    module_call_init(MODULE_INIT_QOM);
+
+    qtest_add_func("/postcopy", test_migrate);
+
+    ret = g_test_run();
+
+    g_assert_cmpint(ret, ==, 0);
+
+    ret = rmdir(tmpfs);
+    if (ret != 0) {
+        g_test_message("unable to rmdir: path (%s): %s\n",
+                       tmpfs, strerror(errno));
+    }
+
+    return ret;
+}
-- 
2.7.4