From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> To: unlisted-recipients:; (no To-header on input) Cc: linuxarm@huawei.com, mauro.chehab@huawei.com, Mauro Carvalho Chehab <mchehab+huawei@kernel.org>, Wei Xu <xuwei5@hisilicon.com>, Rob Herring <robh+dt@kernel.org>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 32/33] dt: hisilicon: add support for the PMIC found on Hikey 970 Date: Tue, 11 Aug 2020 17:41:58 +0200 [thread overview] Message-ID: <9248e84a033c1b61362e9c8041d3b8948540081c.1597160086.git.mchehab+huawei@kernel.org> (raw) In-Reply-To: <cover.1597160086.git.mchehab+huawei@kernel.org> Add a device tree for the HiSilicon 6421v600 SPMI PMIC, used on HiKey970 board. As we now have support for it, change the fixed regulators used by the SD I/O to use the proper LDO supplies. We'll keep the 3v3 fixed regulator, as this will be used by the DRM/KMS driver. So, let's just rename it. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- .../boot/dts/hisilicon/hi3670-hikey970.dts | 16 +- .../boot/dts/hisilicon/hikey970-pmic.dtsi | 200 ++++++++++++++++++ 2 files changed, 204 insertions(+), 12 deletions(-) create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts index 01234a175dcd..c8a72c0873bf 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts @@ -12,6 +12,7 @@ #include "hi3670.dtsi" #include "hikey970-pinctrl.dtsi" +#include "hikey970-pmic.dtsi" / { model = "HiKey970"; @@ -39,7 +40,7 @@ memory@0 { reg = <0x0 0x0 0x0 0x0>; }; - sd_1v8: regulator-1v8 { + fixed_1v8: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -47,15 +48,6 @@ sd_1v8: regulator-1v8 { regulator-always-on; }; - sd_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - wlan_en: wlan-en-1-8v { compatible = "regulator-fixed"; regulator-name = "wlan-en-regulator"; @@ -402,8 +394,8 @@ &dwmmc1 { pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>; - vmmc-supply = <&sd_3v3>; - vqmmc-supply = <&sd_1v8>; + vmmc-supply = <&ldo16>; + vqmmc-supply = <&ldo9>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi new file mode 100644 index 000000000000..2a6c366d9be6 --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hi6421v600 SPMI PMIC used at the HiKey970 Development Board + * + * Copyright (C) 2020, Huawei Tech. Co., Ltd. + */ + +/ { + spmi: spmi@fff24000 { + compatible = "hisilicon,spmi-controller"; + #address-cells = <2>; + #size-cells = <0>; + status = "ok"; + reg = <0x0 0xfff24000 0x0 0x1000>; + spmi-channel = <2>; + + pmic: pmic@0 { + compatible = "hisilicon,hi6421-spmi-pmic"; + slave_id = <0>; + reg = <0 0>; + + #interrupt-cells = <2>; + interrupt-controller; + gpios = <&gpio28 0 0>; + irq-num = <16>; + irq-array = <2>; + irq-mask-addr = <0x202 2>; + irq-addr = <0x212 2>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + ldo3: ldo3@16 { + reg = <0x16>; + vsel-reg = <0x51>; + + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + + enable-mask = <0x01>; + + voltage-table = <1500000>, <1550000>, + <1600000>, <1650000>, + <1700000>, <1725000>, + <1750000>, <1775000>, + <1800000>, <1825000>, + <1850000>, <1875000>, + <1900000>, <1925000>, + <1950000>, <2000000>; + off-on-delay-us = <20000>; + startup-delay-us = <120>; + }; + + ldo4: ldo4@17 { /* 40 PIN */ + reg = <0x17>; + vsel-reg = <0x52>; + + regulator-name = "ldo4"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + + enable-mask = <0x01>; + idle-mode-mask = <0x10>; + eco-microamp = <10000>; + + hi6421-vsel = <0x52 0x07>; + voltage-table = <1725000>, <1750000>, + <1775000>, <1800000>, + <1825000>, <1850000>, + <1875000>, <1900000>; + off-on-delay-us = <20000>; + startup-delay-us = <120>; + }; + + ldo9: ldo9@1C { /* SDCARD I/O */ + reg = <0x1C>; + vsel-reg = <0x57>; + + regulator-name = "ldo9"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + enable-mask = <0x01>; + idle-mode-mask = <0x10>; + eco-microamp = <10000>; + + voltage-table = <1750000>, <1800000>, + <1825000>, <2800000>, + <2850000>, <2950000>, + <3000000>, <3300000>; + off-on-delay-us = <20000>; + startup-delay-us = <360>; + }; + + ldo15: ldo15@21 { /* UFS */ + reg = <0x21>; + vsel-reg = <0x5c>; + + regulator-name = "ldo15"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + + enable-mask = <0x01>; + idle-mode-mask = <0x10>; + eco-microamp = <10000>; + + voltage-table = <1800000>, <1850000>, + <2400000>, <2600000>, + <2700000>, <2850000>, + <2950000>, <3000000>; + off-on-delay-us = <20000>; + startup-delay-us = <120>; + }; + + ldo16: ldo16@22 { /* SD */ + reg = <0x22>; + vsel-reg = <0x5d>; + + regulator-name = "ldo16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + + enable-mask = <0x01>; + idle-mode-mask = <0x10>; + eco-microamp = <10000>; + + voltage-table = <1800000>, <1850000>, + <2400000>, <2600000>, + <2700000>, <2850000>, + <2950000>, <3000000>; + off-on-delay-us = <20000>; + startup-delay-us = <360>; + }; + + ldo17: ldo17@23 { + reg = <0x23>; + vsel-reg = <0x5e>; + + regulator-name = "ldo17"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + + enable-mask = <0x01>; + idle-mode-mask = <0x10>; + eco-microamp = <10000>; + + voltage-table = <2500000>, <2600000>, + <2700000>, <2800000>, + <3000000>, <3100000>, + <3200000>, <3300000>; + off-on-delay-us = <20000>; + startup-delay-us = <120>; + }; + + ldo33: ldo33@32 { /* PEX8606 */ + reg = <0x32>; + vsel-reg = <0x6d>; + regulator-name = "ldo33"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + enable-mask = <0x01>; + + voltage-table = <2500000>, <2600000>, + <2700000>, <2800000>, + <3000000>, <3100000>, + <3200000>, <3300000>; + off-on-delay-us = <20000>; + startup-delay-us = <120>; + }; + + ldo34: ldo34@33 { /* GPS AUX IN VDD */ + reg = <0x33>; + vsel-reg = <0x6e>; + + regulator-name = "ldo34"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + + enable-mask = <0x01>; + + voltage-table = <2600000>, <2700000>, + <2800000>, <2900000>, + <3000000>, <3100000>, + <3200000>, <3300000>; + off-on-delay-us = <20000>; + startup-delay-us = <120>; + }; + }; + }; + }; +}; -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: devicetree@vger.kernel.org, Mauro Carvalho Chehab <mchehab+huawei@kernel.org>, linuxarm@huawei.com, Wei Xu <xuwei5@hisilicon.com>, linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, mauro.chehab@huawei.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH 32/33] dt: hisilicon: add support for the PMIC found on Hikey 970 Date: Tue, 11 Aug 2020 17:41:58 +0200 [thread overview] Message-ID: <9248e84a033c1b61362e9c8041d3b8948540081c.1597160086.git.mchehab+huawei@kernel.org> (raw) In-Reply-To: <cover.1597160086.git.mchehab+huawei@kernel.org> Add a device tree for the HiSilicon 6421v600 SPMI PMIC, used on HiKey970 board. As we now have support for it, change the fixed regulators used by the SD I/O to use the proper LDO supplies. We'll keep the 3v3 fixed regulator, as this will be used by the DRM/KMS driver. So, let's just rename it. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- .../boot/dts/hisilicon/hi3670-hikey970.dts | 16 +- .../boot/dts/hisilicon/hikey970-pmic.dtsi | 200 ++++++++++++++++++ 2 files changed, 204 insertions(+), 12 deletions(-) create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts index 01234a175dcd..c8a72c0873bf 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts @@ -12,6 +12,7 @@ #include "hi3670.dtsi" #include "hikey970-pinctrl.dtsi" +#include "hikey970-pmic.dtsi" / { model = "HiKey970"; @@ -39,7 +40,7 @@ memory@0 { reg = <0x0 0x0 0x0 0x0>; }; - sd_1v8: regulator-1v8 { + fixed_1v8: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -47,15 +48,6 @@ sd_1v8: regulator-1v8 { regulator-always-on; }; - sd_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - wlan_en: wlan-en-1-8v { compatible = "regulator-fixed"; regulator-name = "wlan-en-regulator"; @@ -402,8 +394,8 @@ &dwmmc1 { pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>; - vmmc-supply = <&sd_3v3>; - vqmmc-supply = <&sd_1v8>; + vmmc-supply = <&ldo16>; + vqmmc-supply = <&ldo9>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi new file mode 100644 index 000000000000..2a6c366d9be6 --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hi6421v600 SPMI PMIC used at the HiKey970 Development Board + * + * Copyright (C) 2020, Huawei Tech. Co., Ltd. + */ + +/ { + spmi: spmi@fff24000 { + compatible = "hisilicon,spmi-controller"; + #address-cells = <2>; + #size-cells = <0>; + status = "ok"; + reg = <0x0 0xfff24000 0x0 0x1000>; + spmi-channel = <2>; + + pmic: pmic@0 { + compatible = "hisilicon,hi6421-spmi-pmic"; + slave_id = <0>; + reg = <0 0>; + + #interrupt-cells = <2>; + interrupt-controller; + gpios = <&gpio28 0 0>; + irq-num = <16>; + irq-array = <2>; + irq-mask-addr = <0x202 2>; + irq-addr = <0x212 2>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + ldo3: ldo3@16 { + reg = <0x16>; + vsel-reg = <0x51>; + + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + + enable-mask = <0x01>; + + voltage-table = <1500000>, <1550000>, + <1600000>, <1650000>, + <1700000>, <1725000>, + <1750000>, <1775000>, + <1800000>, <1825000>, + <1850000>, <1875000>, + <1900000>, <1925000>, + <1950000>, <2000000>; + off-on-delay-us = <20000>; + startup-delay-us = <120>; + }; + + ldo4: ldo4@17 { /* 40 PIN */ + reg = <0x17>; + vsel-reg = <0x52>; + + regulator-name = "ldo4"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + + enable-mask = <0x01>; + idle-mode-mask = <0x10>; + eco-microamp = <10000>; + + hi6421-vsel = <0x52 0x07>; + voltage-table = <1725000>, <1750000>, + <1775000>, <1800000>, + <1825000>, <1850000>, + <1875000>, <1900000>; + off-on-delay-us = <20000>; + startup-delay-us = <120>; + }; + + ldo9: ldo9@1C { /* SDCARD I/O */ + reg = <0x1C>; + vsel-reg = <0x57>; + + regulator-name = "ldo9"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + enable-mask = <0x01>; + idle-mode-mask = <0x10>; + eco-microamp = <10000>; + + voltage-table = <1750000>, <1800000>, + <1825000>, <2800000>, + <2850000>, <2950000>, + <3000000>, <3300000>; + off-on-delay-us = <20000>; + startup-delay-us = <360>; + }; + + ldo15: ldo15@21 { /* UFS */ + reg = <0x21>; + vsel-reg = <0x5c>; + + regulator-name = "ldo15"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + + enable-mask = <0x01>; + idle-mode-mask = <0x10>; + eco-microamp = <10000>; + + voltage-table = <1800000>, <1850000>, + <2400000>, <2600000>, + <2700000>, <2850000>, + <2950000>, <3000000>; + off-on-delay-us = <20000>; + startup-delay-us = <120>; + }; + + ldo16: ldo16@22 { /* SD */ + reg = <0x22>; + vsel-reg = <0x5d>; + + regulator-name = "ldo16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + + enable-mask = <0x01>; + idle-mode-mask = <0x10>; + eco-microamp = <10000>; + + voltage-table = <1800000>, <1850000>, + <2400000>, <2600000>, + <2700000>, <2850000>, + <2950000>, <3000000>; + off-on-delay-us = <20000>; + startup-delay-us = <360>; + }; + + ldo17: ldo17@23 { + reg = <0x23>; + vsel-reg = <0x5e>; + + regulator-name = "ldo17"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + + enable-mask = <0x01>; + idle-mode-mask = <0x10>; + eco-microamp = <10000>; + + voltage-table = <2500000>, <2600000>, + <2700000>, <2800000>, + <3000000>, <3100000>, + <3200000>, <3300000>; + off-on-delay-us = <20000>; + startup-delay-us = <120>; + }; + + ldo33: ldo33@32 { /* PEX8606 */ + reg = <0x32>; + vsel-reg = <0x6d>; + regulator-name = "ldo33"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + enable-mask = <0x01>; + + voltage-table = <2500000>, <2600000>, + <2700000>, <2800000>, + <3000000>, <3100000>, + <3200000>, <3300000>; + off-on-delay-us = <20000>; + startup-delay-us = <120>; + }; + + ldo34: ldo34@33 { /* GPS AUX IN VDD */ + reg = <0x33>; + vsel-reg = <0x6e>; + + regulator-name = "ldo34"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + + enable-mask = <0x01>; + + voltage-table = <2600000>, <2700000>, + <2800000>, <2900000>, + <3000000>, <3100000>, + <3200000>, <3300000>; + off-on-delay-us = <20000>; + startup-delay-us = <120>; + }; + }; + }; + }; +}; -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-08-11 15:42 UTC|newest] Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-08-11 15:41 [PATCH 00/33] Add driver for HiSilicon SPMI PMIC for Hikey 970 Mauro Carvalho Chehab 2020-08-11 15:41 ` Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 01/33] spmi: get rid of a warning when built with W=1 Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 02/33] spmi, regulator, mfd: add drivers for hikey970 SPMI PMIC Mauro Carvalho Chehab 2020-08-11 15:58 ` Mark Brown 2020-08-11 16:08 ` Mauro Carvalho Chehab 2020-08-11 16:15 ` Mark Brown 2020-08-11 16:35 ` Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 03/33] spmi: hisi-spmi-controller: coding style fixup Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 04/33] mfd, regulator: get rid of unused code at HiSilicon SPMI PMIC Mauro Carvalho Chehab 2020-08-11 16:00 ` Mark Brown 2020-08-11 15:41 ` [PATCH 05/33] regulator: hisi_regulator_spmi: port it to upstream Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 06/33] mfd: hisi_pmic_spmi: deal with non-static functions Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 07/33] mfd: hisi_pmic_spmi: get rid of the static vars Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 08/33] spmi: hisi-spmi-controller: fix it to probe successfully Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 09/33] spmi: hisi-spmi-controller: fix a typo Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 10/33] spmi: hisi-spmi-controller: adjust whitespaces at defines Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 11/33] spmi: hisi-spmi-controller: use le32 macros where needed Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 12/33] spmi: hisi-spmi-controller: add debug when values are read/write Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 13/33] mfd, regulator: coding style fixups at the HiSilicon SPMI PMIC code Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 14/33] spmi: add hisi-spmi-controller to the building system Mauro Carvalho Chehab 2020-08-11 20:53 ` kernel test robot 2020-08-11 20:53 ` kernel test robot 2020-08-11 15:41 ` [PATCH 15/33] mfd: Kconfig: fix a typo Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 16/33] spmi: hisi-spmi-controller: fix the dev_foo() logic Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 17/33] mfd: pmic: add drivers for hi6421v600 Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 18/33] mfd: hi6421-spmi-pmic: get rid of unused OF properties Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 19/33] spmi: hi6421-spmi-pmic: cleanup " Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 20/33] regulator: hi6421v600-regulator: cleanup struct hisi_regulator Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 21/33] regulator: hi6421v600-regulator: cleanup debug messages Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 22/33] regulator: hi6421v600-regulator: use shorter names for OF properties Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 23/33] regulator: hi6421v600-regulator: better handle modes Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 24/33] regulator, mfd: change namespace for HiSilicon SPMI PMIC drivers Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 25/33] regulator: hi6421v600-regulator: convert to use get/set voltage_sel Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 26/33] regulator: hi6421v600-regulator: don't use usleep_range for off_on_delay Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 27/33] regulator: hi6421v600-regulator: add a driver-specific debug macro Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 28/33] regulator: hi6421v600-regulator: initialize ramp_delay Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 29/33] regulator: hi6421v600-regulator: cleanup DT settings Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 30/33] mfd, spmi, regulator: fix some coding style issues at HiSilicon SPMI PMIC Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 31/33] dt: document HiSilicon SPMI controller and mfd/regulator properties Mauro Carvalho Chehab 2020-08-12 16:30 ` Rob Herring 2020-08-12 18:55 ` Mauro Carvalho Chehab 2020-08-11 15:41 ` Mauro Carvalho Chehab [this message] 2020-08-11 15:41 ` [PATCH 32/33] dt: hisilicon: add support for the PMIC found on Hikey 970 Mauro Carvalho Chehab 2020-08-11 15:41 ` [PATCH 33/33] MAINTAINERS: add an entry for HiSilicon 6421v600 drivers Mauro Carvalho Chehab 2020-08-11 15:54 ` [PATCH 00/33] Add driver for HiSilicon SPMI PMIC for Hikey 970 Mauro Carvalho Chehab 2020-08-11 15:54 ` Mauro Carvalho Chehab 2020-08-11 17:51 ` Jonathan Cameron 2020-08-11 17:51 ` Jonathan Cameron 2020-08-12 7:45 ` Mauro Carvalho Chehab 2020-08-12 7:45 ` Mauro Carvalho Chehab 2020-08-12 8:43 ` Jonathan Cameron 2020-08-12 8:43 ` Jonathan Cameron 2020-08-12 10:38 ` Mauro Carvalho Chehab 2020-08-12 10:38 ` Mauro Carvalho Chehab 2020-08-11 16:09 ` Mark Brown 2020-08-11 16:09 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=9248e84a033c1b61362e9c8041d3b8948540081c.1597160086.git.mchehab+huawei@kernel.org \ --to=mchehab+huawei@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linuxarm@huawei.com \ --cc=mauro.chehab@huawei.com \ --cc=robh+dt@kernel.org \ --cc=xuwei5@hisilicon.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.