From: Rajat Khandelwal <rajat.khandelwal@linux.intel.com>
To: kbusch@kernel.org, axboe@fb.com, hch@lst.de, sagi@grimberg.me
Cc: linux-nvme@lists.infradead.org, "Khandelwal,
Rajat" <rajat.khandelwal@intel.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [BUG] nvme-pci: NVMe probe fails with ENODEV
Date: Thu, 9 Mar 2023 19:34:18 +0530 [thread overview]
Message-ID: <975cc790-7dd9-4902-45c1-c69b4be9ba3a@linux.intel.com> (raw)
In-Reply-To: <f1ad4c1a-2871-57be-48cb-2b0e5cec1bfa@linux.intel.com>
Apologies for the reply (I was not on plain format).
Sending again (as a reply).
Thanks
Rajat
On 3/9/2023 7:31 PM, Rajat Khandelwal wrote:
> Hi,
> I am seeking some help regarding an issue I encounter sporadically
> with Samsung Portable TBT SSD X5.
>
> Right from the thunderbolt discovery to the PCIe enumeration, everything
> is fine, until 'NVME_REG_CSTS' is tried to be read in 'nvme_reset_work'.
> Precisely, 'readl(dev->bar + NVME_REG_CSTS)' fails.
>
> I handle type-C, thunderbolt and USB4 on Chrome platforms, and currently
> we are working on Intel Raptorlake systems.
> This issue has been witnessed from ADL time-frame and now is seen
> on RPL as well. I would really like to get to the bottom of the problem
> and close the issue.
>
> I have tried 5.10 and 6.1.15 kernels.
>
> During the issue:
> Contents of BAR-0: <garbage> 00000004 (dumped using setpci)
> Contents of kernel PCI resource-0: 0x83000000 (matches with the mem allocation)
> Issue: nvme nvme1: Removing after probe failure status: -19
>
> During a working case:
> Contents of BAR-0: 83000004 (dumped using setpci)
>
> Seems like, the kernel PCIe resource contents don't change (which results in a
> successful ioremap), but somehow the BAR-0 dumps garbage.
>
> The logs for the scenario: (apologies if this is not the way to attach a log in
> the mailing list as I have never done that :)).
>
> [ 0.000000] Linux version 6.1.15-01642-g2f18a077d91a (rajath@rajath-NUC10i7FNH) (Chromium OS 16.0_pre475826_p20230103-r1 clang version 16.0.0 (/var/tmp/portage/sys-devel/llvm-16.0_pre475826_p20230103-r1/work/llvm-16.0_pre475826_p20230103/clang 11897708c0229c92802e747564e7c34b722f045f), LLD 16.0.0) #1 SMP PREEMPT_DYNAMIC Thu Mar 9 18:05:29 IST 2023
> [ 0.000000] Command line: cros_secure console= loglevel=7 init=/sbin/init cros_secure drm.trace=0x106 root=PARTUUID=73e0a8ba-3018-3845-bb56-4f84cfa7fafd/PARTNROFF=1 rootwait rw dm_verity.error_behavior=3 dm_verity.max_bios=-1 dm_verity.dev_wait=0 dm="1 vroot none ro 1,0 6348800 verity payload=ROOT_DEV hashtree=HASH_DEV hashstart=6348800 alg=sha256 root_hexdigest=0366e3e4513a397e0c251ddd703a03cbd06f8de6ed9f2a1f7ad6617f30a44817 salt=cf6734dadd53d9e3adcabf0ee4138b94df54df8d8095f1a8fec6f49fb90b63e8" noinitrd cros_debug vt.global_cursor_default=0 kern_guid=73e0a8ba-3018-3845-bb56-4f84cfa7fafd add_efi_memmap boot=local noresume noswap i915.modeset=1 ramoops.ecc=1 tpm_tis.force=0 intel_pmc_core.warn_on_s0ix_failures=1 i915.enable_guc=3 i915.enable_dc=4 xdomain=0 swiotlb=65536 intel_iommu=on i915.enable_psr=1 usb-storage.quirks=13fe:6500:u
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
> [ 0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
> [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
> [ 0.000000] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
> [ 0.000000] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
> [ 0.000000] signal: max sigframe size: 3632
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007685afff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000007685b000-0x00000000803fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000f9ffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fb000000-0x00000000fb000fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fc800000-0x00000000fe7fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb7ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed6ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed87fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed92fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000feda1fff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fedc0000-0x00000000feddffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fbfffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 3.0 present.
> [ 0.000000] DMI: Google Brya/Brya, BIOS Google_Brya.14505.395.14827 02/20/2023
> [ 0.000000] tsc: Detected 2700.000 MHz processor
> [ 0.000000] tsc: Detected 2688.000 MHz TSC
> [ 0.000002] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000004] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000007] last_pfn = 0x87fc00 max_arch_pfn = 0x400000000
> [ 0.000099] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
> [ 0.000554] last_pfn = 0x7685b max_arch_pfn = 0x400000000
> [ 0.003716] Using GB pages for direct mapping
> [ 0.003786] ACPI: Early table checksum verification disabled
> [ 0.003787] ACPI: RSDP 0x00000000000F0000 000024 (v02 COREv4)
> [ 0.003789] ACPI: XSDT 0x00000000768710E0 00006C (v01 COREv4 COREBOOT 00000000 CORE 20210331)
> [ 0.003792] ACPI: FACP 0x00000000768762C0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20210331)
> [ 0.003795] ACPI: DSDT 0x0000000076871280 00503F (v02 COREv4 COREBOOT 20110725 INTL 20210331)
> [ 0.003796] ACPI: FACS 0x0000000076871240 000040
> [ 0.003796] ACPI: FACS 0x0000000076871240 000040
> [ 0.003797] ACPI: SSDT 0x00000000768763E0 007A13 (v02 COREv4 COREBOOT 0000002A CORE 20210331)
> [ 0.003798] ACPI: MCFG 0x000000007687DE00 00003C (v01 COREv4 COREBOOT 00000000 CORE 20210331)
> [ 0.003799] ACPI: TPM2 0x000000007687DE40 00004C (v04 COREv4 COREBOOT 00000000 CORE 20210331)
> [ 0.003800] ACPI: LPIT 0x000000007687DE90 000094 (v00 COREv4 COREBOOT 0000002A CORE 20210331)
> [ 0.003801] ACPI: APIC 0x000000007687DF30 0000B2 (v03 COREv4 COREBOOT 00000000 CORE 20210331)
> [ 0.003803] ACPI: DMAR 0x000000007687DFF0 0000A0 (v01 COREv4 COREBOOT 00000000 CORE 20210331)
> [ 0.003804] ACPI: DBG2 0x000000007687E090 000054 (v00 COREv4 COREBOOT 00000000 CORE 20210331)
> [ 0.003805] ACPI: HPET 0x000000007687E0F0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20210331)
> [ 0.003805] ACPI: Reserving FACP table memory at [mem 0x768762c0-0x768763d3]
> [ 0.003806] ACPI: Reserving DSDT table memory at [mem 0x76871280-0x768762be]
> [ 0.003806] ACPI: Reserving FACS table memory at [mem 0x76871240-0x7687127f]
> [ 0.003807] ACPI: Reserving FACS table memory at [mem 0x76871240-0x7687127f]
> [ 0.003807] ACPI: Reserving SSDT table memory at [mem 0x768763e0-0x7687ddf2]
> [ 0.003807] ACPI: Reserving MCFG table memory at [mem 0x7687de00-0x7687de3b]
> [ 0.003808] ACPI: Reserving TPM2 table memory at [mem 0x7687de40-0x7687de8b]
> [ 0.003808] ACPI: Reserving LPIT table memory at [mem 0x7687de90-0x7687df23]
> [ 0.003808] ACPI: Reserving APIC table memory at [mem 0x7687df30-0x7687dfe1]
> [ 0.003809] ACPI: Reserving DMAR table memory at [mem 0x7687dff0-0x7687e08f]
> [ 0.003809] ACPI: Reserving DBG2 table memory at [mem 0x7687e090-0x7687e0e3]
> [ 0.003809] ACPI: Reserving HPET table memory at [mem 0x7687e0f0-0x7687e127]
> [ 0.003832] Zone ranges:
> [ 0.003833] DMA [mem 0x0000000000001000-0x0000000000ffffff]
> [ 0.003833] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
> [ 0.003834] Normal [mem 0x0000000100000000-0x000000087fbfffff]
> [ 0.003835] Movable zone start for each node
> [ 0.003835] Early memory node ranges
> [ 0.003835] node 0: [mem 0x0000000000001000-0x000000000009ffff]
> [ 0.003836] node 0: [mem 0x0000000000100000-0x000000007685afff]
> [ 0.003836] node 0: [mem 0x0000000100000000-0x000000087fbfffff]
> [ 0.003837] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fbfffff]
> [ 0.003840] On node 0, zone DMA: 1 pages in unavailable ranges
> [ 0.003857] On node 0, zone DMA: 96 pages in unavailable ranges
> [ 0.049224] On node 0, zone Normal: 6053 pages in unavailable ranges
> [ 0.049233] On node 0, zone Normal: 1024 pages in unavailable ranges
> [ 0.049254] Reserving Intel graphics memory at [mem 0x7c800000-0x803fffff]
> [ 0.053110] ACPI: PM-Timer IO Port: 0x1808
> [ 0.053116] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> [ 0.053155] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
> [ 0.053156] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.053158] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.053160] ACPI: Using ACPI (MADT) for SMP configuration information
> [ 0.053160] ACPI: HPET id: 0x8086a701 base: 0xfed00000
> [ 0.053164] TSC deadline timer available
> [ 0.053165] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
> [ 0.053172] [mem 0x80400000-0xbfffffff] available for PCI devices
> [ 0.053174] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
> [ 0.055965] setup_percpu: NR_CPUS:24 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
> [ 0.056338] percpu: Embedded 54 pages/cpu s181864 r8192 d31128 u262144
> [ 0.056341] pcpu-alloc: s181864 r8192 d31128 u262144 alloc=1*2097152
> [ 0.056343] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
> [ 0.056354] Built 1 zonelists, mobility grouping on. Total pages: 8218057
> [ 0.056356] Kernel command line: cros_secure console= loglevel=7 init=/sbin/init cros_secure drm.trace=0x106 root=PARTUUID=73e0a8ba-3018-3845-bb56-4f84cfa7fafd/PARTNROFF=1 rootwait rw dm_verity.error_behavior=3 dm_verity.max_bios=-1 dm_verity.dev_wait=0 dm="1 vroot none ro 1,0 6348800 verity payload=ROOT_DEV hashtree=HASH_DEV hashstart=6348800 alg=sha256 root_hexdigest=0366e3e4513a397e0c251ddd703a03cbd06f8de6ed9f2a1f7ad6617f30a44817 salt=cf6734dadd53d9e3adcabf0ee4138b94df54df8d8095f1a8fec6f49fb90b63e8" noinitrd cros_debug vt.global_cursor_default=0 kern_guid=73e0a8ba-3018-3845-bb56-4f84cfa7fafd add_efi_memmap boot=local noresume noswap i915.modeset=1 ramoops.ecc=1 tpm_tis.force=0 intel_pmc_core.warn_on_s0ix_failures=1 i915.enable_guc=3 i915.enable_dc=4 xdomain=0 swiotlb=65536 intel_iommu=on i915.enable_psr=1 usb-storage.quirks=13fe:6500:u
> [ 0.056452] Setting dangerous option i915.enable_guc - tainting kernel
> [ 0.056454] Setting dangerous option i915.enable_dc - tainting kernel
> [ 0.056467] DMAR: IOMMU enabled
> [ 0.056469] Setting dangerous option i915.enable_psr - tainting kernel
> [ 0.056473] Unknown kernel command line parameters "cros_secure cros_debug noresume noswap dm=1 vroot none ro 1,0 6348800 verity payload=ROOT_DEV hashtree=HASH_DEV hashstart=6348800 alg=sha256 root_hexdigest=0366e3e4513a397e0c251ddd703a03cbd06f8de6ed9f2a1f7ad6617f30a44817 salt=cf6734dadd53d9e3adcabf0ee4138b94df54df8d8095f1a8fec6f49fb90b63e8 boot=local xdomain=0", will be passed to user space.
> [ 0.056484] random: crng init done
> [ 0.058995] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
> [ 0.060257] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
> [ 0.060463] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
> [ 0.060470] software IO TLB: area num 16.
> [ 0.120798] Memory: 32648148K/33394664K available (16394K kernel code, 2450K rwdata, 6896K rodata, 1940K init, 2856K bss, 746256K reserved, 0K cma-reserved)
> [ 0.120844] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
> [ 0.120849] ftrace: allocating 54963 entries in 215 pages
> [ 0.120974] ftrace: allocated 215 pages with 6 groups
> [ 0.121007] Dynamic Preempt: full
> [ 0.121028] rcu: Preemptible hierarchical RCU implementation.
> [ 0.121028] rcu: RCU restricting CPUs from NR_CPUS=24 to nr_cpu_ids=12.
> [ 0.121029] Trampoline variant of Tasks RCU enabled.
> [ 0.121029] Rude variant of Tasks RCU enabled.
> [ 0.121029] Tracing variant of Tasks RCU enabled.
> [ 0.121030] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
> [ 0.121030] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
> [ 0.122263] NR_IRQS: 4352, nr_irqs: 2152, preallocated irqs: 16
> [ 0.122530] rcu: Offload RCU callbacks from CPUs: 0-11.
> [ 0.122532] rcu: srcu_init: Setting srcu_struct sizes based on contention.
> [ 0.122763] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
> [ 0.122805] spurious 8259A interrupt: IRQ7.
> [ 0.122831] ACPI: Core revision 20220331
> [ 0.122862] hpet: HPET dysfunctional in PC10. Force disabled.
> [ 0.122863] APIC: Switch to symmetric I/O mode setup
> [ 0.122864] DMAR: Host address width 46
> [ 0.122864] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
> [ 0.122869] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 29a00f0505e
> [ 0.122870] DMAR: DRHD base: 0x000000fed92000 flags: 0x0
> [ 0.122872] DMAR: dmar1: reg_base_addr fed92000 ver 1:0 cap d2008c40660462 ecap f050da
> [ 0.122873] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
> [ 0.122875] DMAR: dmar2: reg_base_addr fed91000 ver 5:0 cap d2008c40660462 ecap f050da
> [ 0.122876] DMAR: RMRR base: 0x0000007c000000 end: 0x000000803fffff
> [ 0.122878] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 2
> [ 0.122879] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
> [ 0.122879] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
> [ 0.124576] DMAR-IR: Enabled IRQ remapping in x2apic mode
> [ 0.124577] x2apic enabled
> [ 0.124596] Switched APIC routing to cluster x2apic.
> [ 0.129094] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26bef67878b, max_idle_ns: 440795293631 ns
> [ 0.129098] Calibrating delay loop (skipped), value calculated using timer frequency.. 5376.00 BogoMIPS (lpj=2688000)
> [ 0.129099] pid_max: default: 32768 minimum: 301
> [ 0.129113] LSM: Security Framework initializing
> [ 0.129117] landlock: Up and running.
> [ 0.129118] Yama: becoming mindful.
> [ 0.129120] LoadPin: ready to pin (currently enforcing)
> [ 0.129122] Chromium OS LSM: enabled
> [ 0.129122] SELinux: Initializing.
> [ 0.129173] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
> [ 0.129203] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
> [ 0.129328] x86/tme: enabled by BIOS
> [ 0.129329] x86/tme: Unknown policy is active: 0x2
> [ 0.129329] x86/mktme: No known encryption algorithm is supported: 0x4
> [ 0.129329] x86/mktme: enabled by BIOS
> [ 0.129330] x86/mktme: 15 KeyIDs available
> [ 0.129335] CPU0: Thermal monitoring enabled (TM1)
> [ 0.129336] x86/cpu: User Mode Instruction Prevention (UMIP) activated
> [ 0.129435] process: using mwait in idle threads
> [ 0.129436] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
> [ 0.129437] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
> [ 0.129438] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
> [ 0.129441] Spectre V2 : Mitigation: Enhanced IBRS
> [ 0.129441] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
> [ 0.129441] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
> [ 0.129443] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
> [ 0.129445] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
> [ 0.130097] Freeing SMP alternatives memory: 40K
> [ 0.130097] smpboot: CPU0: 13th Gen Intel(R) Core(TM) i7-1365U (family: 0x6, model: 0xba, stepping: 0x3)
> [ 0.130097] cblist_init_generic: Setting adjustable number of callback queues.
> [ 0.130097] cblist_init_generic: Setting shift to 4 and lim to 1.
> [ 0.130097] cblist_init_generic: Setting shift to 4 and lim to 1.
> [ 0.130097] cblist_init_generic: Setting shift to 4 and lim to 1.
> [ 0.130097] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Alderlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
> [ 0.130097] core: cpu_core PMU driver:
> [ 0.130097] ... version: 5
> [ 0.130097] ... bit width: 48
> [ 0.130097] ... generic registers: 8
> [ 0.130097] ... value mask: 0000ffffffffffff
> [ 0.130097] ... max period: 00007fffffffffff
> [ 0.130097] ... fixed-purpose events: 4
> [ 0.130097] ... event mask: 0001000f000000ff
> [ 0.130097] Estimated ratio of average max frequency by base frequency (times 1024): 1858
> [ 0.130097] rcu: Hierarchical SRCU implementation.
> [ 0.130097] rcu: Max phase no-delay instances is 400.
> [ 0.130097] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
> [ 0.130097] smp: Bringing up secondary CPUs ...
> [ 0.130097] x86: Booting SMP configuration:
> [ 0.130097] .... node #0, CPUs: #1 #2 #3 #4
> [ 0.007387] core: cpu_atom PMU driver: PEBS-via-PT
> [ 0.007387] ... version: 5
> [ 0.007387] ... bit width: 48
> [ 0.007387] ... generic registers: 6
> [ 0.007387] ... value mask: 0000ffffffffffff
> [ 0.007387] ... max period: 00007fffffffffff
> [ 0.007387] ... fixed-purpose events: 3
> [ 0.007387] ... event mask: 000000070000003f
> [ 0.133397] #5 #6 #7 #8 #9 #10 #11
> [ 0.142232] smp: Brought up 1 node, 12 CPUs
> [ 0.142232] smpboot: Max logical packages: 1
> [ 0.142232] smpboot: Total of 12 processors activated (64512.00 BogoMIPS)
> [ 0.143521] devtmpfs: initialized
> [ 0.143521] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
> [ 0.143521] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
> [ 0.143521] pinctrl core: initialized pinctrl subsystem
> [ 0.144098] PM: RTC time: 12:54:59, date: 2023-03-09
> [ 0.144361] NET: Registered PF_NETLINK/PF_ROUTE protocol family
> [ 0.144457] audit: initializing netlink subsys (disabled)
> [ 0.144460] audit: type=2000 audit(1678366499.015:1): state=initialized audit_enabled=0 res=1
> [ 0.144460] thermal_sys: Registered thermal governor 'step_wise'
> [ 0.144460] thermal_sys: Registered thermal governor 'user_space'
> [ 0.144460] cpuidle: using governor ladder
> [ 0.144460] cpuidle: using governor menu
> [ 0.144460] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.144460] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
> [ 0.144460] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
> [ 0.144460] PCI: Using configuration type 1 for base access
> [ 0.145959] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
> [ 0.147120] cryptd: max_cpu_qlen set to 1000
> [ 0.147132] ACPI: Added _OSI(Module Device)
> [ 0.147132] ACPI: Added _OSI(Processor Device)
> [ 0.147133] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.147134] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.149332] ACPI: 2 ACPI AML tables successfully acquired and loaded
> [ 0.154204] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
> [ 0.154205] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
> [ 0.154315] ACPI: EC: EC started
> [ 0.154315] ACPI: EC: interrupt blocked
> [ 0.154372] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
> [ 0.154373] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
> [ 0.154374] ACPI: Interpreter enabled
> [ 0.154380] ACPI: PM: (supports S0 S3 S5)
> [ 0.154380] ACPI: Using IOAPIC for interrupt routing
> [ 0.154387] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 0.154388] PCI: Ignoring E820 reservations for host bridge windows
> [ 0.154478] ACPI: Enabled 2 GPEs in block 00 to 7F
> [ 0.155013] ACPI: PM: Power Resource [RTD3]
> [ 0.155192] ACPI: PM: Power Resource [PRIC]
> [ 0.155334] ACPI: PM: Power Resource [PRIC]
> [ 0.155391] ACPI: PM: Power Resource [PR00]
> [ 0.465285] ACPI: PM: Power Resource [PR01]
> [ 0.609221] ACPI: PM: Power Resource [PR02]
> [ 0.729264] ACPI: PM: Power Resource [PR03]
> [ 0.735424] ACPI: PM: Power Resource [TBT0]
> [ 0.735433] ACPI: PM: Power Resource [TBT1]
> [ 0.735441] ACPI: PM: Power Resource [D3C]
> [ 0.763119] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.763125] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
> [ 0.763134] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR]
> [ 0.763596] PCI host bridge to bus 0000:00
> [ 0.763597] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
> [ 0.763598] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
> [ 0.763598] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
> [ 0.763599] pci_bus 0000:00: root bus resource [mem 0x80400000-0xdfffffff window]
> [ 0.763599] pci_bus 0000:00: root bus resource [mem 0x87fc00000-0x3fffffffffff window]
> [ 0.763600] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
> [ 0.763600] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed47fff window]
> [ 0.763601] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.763627] pci 0000:00:00.0: [8086:a708] type 00 class 0x060000
> [ 0.763742] pci 0000:00:02.0: [8086:a7a1] type 00 class 0x030000
> [ 0.763748] pci 0000:00:02.0: reg 0x10: [mem 0x81000000-0x81ffffff 64bit]
> [ 0.763753] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
> [ 0.763756] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
> [ 0.763766] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
> [ 0.763768] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
> [ 0.763790] pci 0000:00:02.0: reg 0x344: [mem 0x00000000-0x00ffffff 64bit]
> [ 0.763790] pci 0000:00:02.0: VF(n) BAR0 space: [mem 0x00000000-0x06ffffff 64bit] (contains BAR0 for 7 VFs)
> [ 0.763793] pci 0000:00:02.0: reg 0x34c: [mem 0x00000000-0x1fffffff 64bit pref]
> [ 0.763794] pci 0000:00:02.0: VF(n) BAR2 space: [mem 0x00000000-0xdfffffff 64bit pref] (contains BAR2 for 7 VFs)
> [ 0.763841] pci 0000:00:04.0: [8086:a71d] type 00 class 0x118000
> [ 0.763854] pci 0000:00:04.0: reg 0x10: [mem 0x80780000-0x8079ffff 64bit]
> [ 0.763929] pci 0000:00:05.0: [8086:a75d] type 00 class 0x048000
> [ 0.763935] pci 0000:00:05.0: reg 0x10: [mem 0x82000000-0x82ffffff 64bit]
> [ 0.763950] pci 0000:00:05.0: enabling Extended Tags
> [ 0.763954] pci 0000:00:05.0: DMAR: Passthrough IOMMU for integrated Intel IPU
> [ 0.764008] pci 0000:00:07.0: [8086:a76e] type 01 class 0x060400
> [ 0.764076] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
> [ 0.764166] pci 0000:00:07.1: [8086:a73f] type 01 class 0x060400
> [ 0.764237] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
> [ 0.764321] pci 0000:00:07.2: [8086:a72f] type 01 class 0x060400
> [ 0.764390] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
> [ 0.764488] pci 0000:00:08.0: [8086:a74f] type 00 class 0x088000
> [ 0.764495] pci 0000:00:08.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
> [ 0.764556] pci 0000:00:0a.0: [8086:a77d] type 00 class 0x118000
> [ 0.764561] pci 0000:00:0a.0: reg 0x10: [mem 0x807c0000-0x807c7fff 64bit]
> [ 0.764576] pci 0000:00:0a.0: enabling Extended Tags
> [ 0.764637] pci 0000:00:0d.0: [8086:a71e] type 00 class 0x0c0330
> [ 0.764645] pci 0000:00:0d.0: reg 0x10: [mem 0x807a0000-0x807affff 64bit]
> [ 0.764681] pci 0000:00:0d.0: PME# supported from D3hot D3cold
> [ 0.764733] pci 0000:00:0d.2: [8086:a73e] type 00 class 0x0c0340
> [ 0.764741] pci 0000:00:0d.2: reg 0x10: [mem 0x80700000-0x8073ffff 64bit]
> [ 0.764747] pci 0000:00:0d.2: reg 0x18: [mem 0x807d4000-0x807d4fff 64bit]
> [ 0.764774] pci 0000:00:0d.2: supports D1 D2
> [ 0.764774] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.764806] pci 0000:00:0d.3: [8086:a76d] type 00 class 0x0c0340
> [ 0.764815] pci 0000:00:0d.3: reg 0x10: [mem 0x80740000-0x8077ffff 64bit]
> [ 0.764820] pci 0000:00:0d.3: reg 0x18: [mem 0x807d5000-0x807d5fff 64bit]
> [ 0.764847] pci 0000:00:0d.3: supports D1 D2
> [ 0.764847] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.764923] pci 0000:00:14.0: [8086:51ed] type 00 class 0x0c0330
> [ 0.764942] pci 0000:00:14.0: reg 0x10: [mem 0x807b0000-0x807bffff 64bit]
> [ 0.765025] pci 0000:00:14.0: PME# supported from D3hot D3cold
> [ 0.765087] pci 0000:00:14.2: [8086:51ef] type 00 class 0x050000
> [ 0.765108] pci 0000:00:14.2: reg 0x10: [mem 0xfe010000-0xfe013fff 64bit]
> [ 0.765123] pci 0000:00:14.2: reg 0x18: [mem 0x807d6000-0x807d6fff 64bit]
> [ 0.765326] pci 0000:00:14.3: [8086:51f1] type 00 class 0x028000
> [ 0.765349] pci 0000:00:14.3: reg 0x10: [mem 0x807cc000-0x807cffff 64bit]
> [ 0.765503] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
> [ 0.765679] pci 0000:00:15.0: [8086:51e8] type 00 class 0x0c8000
> [ 0.765704] pci 0000:00:15.0: reg 0x10: [mem 0x807d7000-0x807d7fff 64bit]
> [ 0.765841] pci 0000:00:15.1: [8086:51e9] type 00 class 0x0c8000
> [ 0.765865] pci 0000:00:15.1: reg 0x10: [mem 0x807d8000-0x807d8fff 64bit]
> [ 0.766001] pci 0000:00:15.2: [8086:51ea] type 00 class 0x0c8000
> [ 0.766023] pci 0000:00:15.2: reg 0x10: [mem 0x807d9000-0x807d9fff 64bit]
> [ 0.766160] pci 0000:00:15.3: [8086:51eb] type 00 class 0x0c8000
> [ 0.766184] pci 0000:00:15.3: reg 0x10: [mem 0x807da000-0x807dafff 64bit]
> [ 0.766339] pci 0000:00:16.0: [8086:51e0] type 00 class 0x078000
> [ 0.766364] pci 0000:00:16.0: reg 0x10: [mem 0x807db000-0x807dbfff 64bit]
> [ 0.766465] pci 0000:00:16.0: PME# supported from D3hot
> [ 0.766547] pci 0000:00:19.0: [8086:51c5] type 00 class 0x0c8000
> [ 0.766567] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
> [ 0.766690] pci 0000:00:19.1: [8086:51c6] type 00 class 0x0c8000
> [ 0.766717] pci 0000:00:19.1: reg 0x10: [mem 0x807dc000-0x807dcfff 64bit]
> [ 0.766886] pci 0000:00:1c.0: [8086:51bf] type 01 class 0x060400
> [ 0.766991] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.767125] pci 0000:00:1d.0: [8086:51b0] type 01 class 0x060400
> [ 0.767221] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
> [ 0.767344] pci 0000:00:1e.0: [8086:51a8] type 00 class 0x078000
> [ 0.767367] pci 0000:00:1e.0: reg 0x10: [mem 0xfe03e000-0xfe03efff 64bit]
> [ 0.767514] pci 0000:00:1e.3: [8086:51ab] type 00 class 0x0c8000
> [ 0.767542] pci 0000:00:1e.3: reg 0x10: [mem 0x807dd000-0x807ddfff 64bit]
> [ 0.767682] pci 0000:00:1f.0: [8086:519d] type 00 class 0x060100
> [ 0.767842] pci 0000:00:1f.3: [8086:51ca] type 00 class 0x040100
> [ 0.767890] pci 0000:00:1f.3: reg 0x10: [mem 0x807d0000-0x807d3fff 64bit]
> [ 0.767960] pci 0000:00:1f.3: reg 0x20: [mem 0x80600000-0x806fffff 64bit]
> [ 0.768070] pci 0000:00:1f.3: PME# supported from D3hot D3cold
> [ 0.768153] pci 0000:00:1f.5: [8086:51a4] type 00 class 0x0c8000
> [ 0.768171] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
> [ 0.768291] pci 0000:00:07.0: PCI bridge to [bus 01-2b]
> [ 0.768293] pci 0000:00:07.0: bridge window [io 0x2000-0x3fff]
> [ 0.768295] pci 0000:00:07.0: bridge window [mem 0x83000000-0x8f1fffff]
> [ 0.768298] pci 0000:00:07.0: bridge window [mem 0x87fc00000-0x89bbfffff 64bit pref]
> [ 0.768322] pci 0000:00:07.1: PCI bridge to [bus 2c-56]
> [ 0.768324] pci 0000:00:07.1: bridge window [io 0x4000-0x5fff]
> [ 0.768326] pci 0000:00:07.1: bridge window [mem 0xa0000000-0xac1fffff]
> [ 0.768329] pci 0000:00:07.1: bridge window [mem 0x89bc00000-0x8b7bfffff 64bit pref]
> [ 0.768352] pci 0000:00:07.2: PCI bridge to [bus 57-81]
> [ 0.768354] pci 0000:00:07.2: bridge window [io 0x6000-0x7fff]
> [ 0.768356] pci 0000:00:07.2: bridge window [mem 0xac200000-0xb83fffff]
> [ 0.768359] pci 0000:00:07.2: bridge window [mem 0x8b7c00000-0x8d3bfffff 64bit pref]
> [ 0.772121] pci 0000:82:00.0: [17a0:9755] type 00 class 0x080501
> [ 0.772152] pci 0000:82:00.0: reg 0x10: [mem 0x80400000-0x80400fff]
> [ 0.772374] pci 0000:82:00.0: supports D1 D2
> [ 0.772374] pci 0000:82:00.0: PME# supported from D1 D2 D3hot D3cold
> [ 0.772890] pci 0000:00:1c.0: PCI bridge to [bus 82]
> [ 0.772894] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x804fffff]
> [ 0.772945] pci 0000:83:00.0: [1c5c:174a] type 00 class 0x010802
> [ 0.772967] pci 0000:83:00.0: reg 0x10: [mem 0x80500000-0x80503fff 64bit]
> [ 0.772977] pci 0000:83:00.0: reg 0x18: [mem 0x80504000-0x80504fff]
> [ 0.772987] pci 0000:83:00.0: reg 0x1c: [mem 0x80505000-0x80505fff]
> [ 0.773279] pci 0000:00:1d.0: PCI bridge to [bus 83]
> [ 0.773283] pci 0000:00:1d.0: bridge window [mem 0x80500000-0x805fffff]
> [ 0.773314] pci_bus 0000:00: on NUMA node 0
> [ 0.773788] Low-power S0 idle used by default for system suspend
> [ 0.775149] ACPI: EC: interrupt unblocked
> [ 0.775149] ACPI: EC: event unblocked
> [ 0.775161] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
> [ 0.775162] ACPI: EC: GPE=0x6e
> [ 0.775162] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
> [ 0.775163] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
> [ 0.775226] iommu: Default domain type: Translated
> [ 0.775226] iommu: DMA domain TLB invalidation policy: lazy mode
> [ 0.775226] SCSI subsystem initialized
> [ 0.775226] libata version 3.00 loaded.
> [ 0.775226] ACPI: bus type USB registered
> [ 0.775226] usbcore: registered new interface driver usbfs
> [ 0.775226] usbcore: registered new interface driver hub
> [ 0.775226] usbcore: registered new device driver usb
> [ 0.775226] mc: Linux media interface: v0.10
> [ 0.775226] videodev: Linux video capture interface: v2.00
> [ 0.775226] chromeos_acpi: registering CHSW 0
> [ 0.775228] chromeos_acpi: registering VBNV 0
> [ 0.775228] chromeos_acpi: registering VBNV 1
> [ 0.775274] chromeos_acpi: truncating buffer from 3072 to 1336
> [ 0.776119] chromeos_acpi: installed
> [ 0.776128] Advanced Linux Sound Architecture Driver Initialized.
> [ 0.776192] PCI: Using ACPI for IRQ routing
> [ 0.790596] PCI: pci_cache_line_size set to 64 bytes
> [ 0.790726] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: address conflict with 0000:00:14.2 [mem 0xfe010000-0xfe013fff 64bit]
> [ 0.790817] e820: reserve RAM buffer [mem 0x7685b000-0x77ffffff]
> [ 0.790818] e820: reserve RAM buffer [mem 0x87fc00000-0x87fffffff]
> [ 0.790820] clocksource: Switched to clocksource tsc-early
> [ 0.790820] VFS: Disk quotas dquot_6.6.0
> [ 0.790820] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.790820] pnp: PnP ACPI init
> [ 0.790820] pnp 00:00: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
> [ 0.790820] system 00:00: [mem 0xfedc0000-0xfeddffff] has been reserved
> [ 0.790820] system 00:00: [mem 0xfeda0000-0xfeda0fff] has been reserved
> [ 0.790820] system 00:00: [mem 0xfeda1000-0xfeda1fff] has been reserved
> [ 0.790820] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
> [ 0.790820] system 00:00: [mem 0xfe000000-0xffffffff] could not be reserved
> [ 0.790820] system 00:00: [mem 0xf8000000-0xf9ffffff] has been reserved
> [ 0.790820] system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
> [ 0.790820] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
> [ 0.790820] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
> [ 0.790820] system 00:02: [io 0x1800-0x18fe] has been reserved
> [ 0.790820] system 00:04: [io 0x0900-0x09fe] has been reserved
> [ 0.790820] system 00:05: [io 0x0200] has been reserved
> [ 0.790820] system 00:05: [io 0x0204] has been reserved
> [ 0.790820] system 00:05: [io 0x0800-0x087f] has been reserved
> [ 0.790820] system 00:05: [io 0x0880-0x08ff] has been reserved
> [ 0.791055] pnp: PnP ACPI: found 7 devices
> [ 0.795701] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
> [ 0.795740] NET: Registered PF_INET protocol family
> [ 0.795954] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
> [ 0.797282] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
> [ 0.797307] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
> [ 0.797329] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
> [ 0.797491] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
> [ 0.797636] TCP: Hash tables configured (established 262144 bind 65536)
> [ 0.797660] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
> [ 0.797702] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
> [ 0.797762] NET: Registered PF_UNIX/PF_LOCAL protocol family
> [ 0.797769] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 82] add_size 1000
> [ 0.797771] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 82] add_size 200000 add_align 100000
> [ 0.797776] pci 0000:00:02.0: BAR 9: assigned [mem 0x8e0000000-0x9bfffffff 64bit pref]
> [ 0.797778] pci 0000:00:02.0: BAR 7: assigned [mem 0x8d4000000-0x8daffffff 64bit]
> [ 0.797780] pci 0000:00:1c.0: BAR 15: assigned [mem 0x8d3c00000-0x8d3dfffff 64bit pref]
> [ 0.797781] pci 0000:00:08.0: BAR 0: assigned [mem 0x8d3e00000-0x8d3e00fff 64bit]
> [ 0.797784] pci 0000:00:19.0: BAR 0: assigned [mem 0x8d3e01000-0x8d3e01fff 64bit]
> [ 0.797797] pci 0000:00:1c.0: BAR 13: assigned [io 0x8000-0x8fff]
> [ 0.797798] pci 0000:00:1f.5: BAR 0: assigned [mem 0x807c8000-0x807c8fff]
> [ 0.797809] pci 0000:00:07.0: PCI bridge to [bus 01-2b]
> [ 0.797810] pci 0000:00:07.0: bridge window [io 0x2000-0x3fff]
> [ 0.797813] pci 0000:00:07.0: bridge window [mem 0x83000000-0x8f1fffff]
> [ 0.797814] pci 0000:00:07.0: bridge window [mem 0x87fc00000-0x89bbfffff 64bit pref]
> [ 0.797818] pci 0000:00:07.1: PCI bridge to [bus 2c-56]
> [ 0.797819] pci 0000:00:07.1: bridge window [io 0x4000-0x5fff]
> [ 0.797821] pci 0000:00:07.1: bridge window [mem 0xa0000000-0xac1fffff]
> [ 0.797823] pci 0000:00:07.1: bridge window [mem 0x89bc00000-0x8b7bfffff 64bit pref]
> [ 0.797826] pci 0000:00:07.2: PCI bridge to [bus 57-81]
> [ 0.797827] pci 0000:00:07.2: bridge window [io 0x6000-0x7fff]
> [ 0.797829] pci 0000:00:07.2: bridge window [mem 0xac200000-0xb83fffff]
> [ 0.797831] pci 0000:00:07.2: bridge window [mem 0x8b7c00000-0x8d3bfffff 64bit pref]
> [ 0.797835] pci 0000:00:1c.0: PCI bridge to [bus 82]
> [ 0.797842] pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff]
> [ 0.797846] pci 0000:00:1c.0: bridge window [mem 0x80400000-0x804fffff]
> [ 0.797848] pci 0000:00:1c.0: bridge window [mem 0x8d3c00000-0x8d3dfffff 64bit pref]
> [ 0.797853] pci 0000:00:1d.0: PCI bridge to [bus 83]
> [ 0.797856] pci 0000:00:1d.0: bridge window [mem 0x80500000-0x805fffff]
> [ 0.797862] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
> [ 0.797863] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
> [ 0.797864] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window]
> [ 0.797864] pci_bus 0000:00: resource 7 [mem 0x80400000-0xdfffffff window]
> [ 0.797865] pci_bus 0000:00: resource 8 [mem 0x87fc00000-0x3fffffffffff window]
> [ 0.797865] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
> [ 0.797866] pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed47fff window]
> [ 0.797866] pci_bus 0000:01: resource 0 [io 0x2000-0x3fff]
> [ 0.797867] pci_bus 0000:01: resource 1 [mem 0x83000000-0x8f1fffff]
> [ 0.797867] pci_bus 0000:01: resource 2 [mem 0x87fc00000-0x89bbfffff 64bit pref]
> [ 0.797868] pci_bus 0000:2c: resource 0 [io 0x4000-0x5fff]
> [ 0.797868] pci_bus 0000:2c: resource 1 [mem 0xa0000000-0xac1fffff]
> [ 0.797868] pci_bus 0000:2c: resource 2 [mem 0x89bc00000-0x8b7bfffff 64bit pref]
> [ 0.797869] pci_bus 0000:57: resource 0 [io 0x6000-0x7fff]
> [ 0.797869] pci_bus 0000:57: resource 1 [mem 0xac200000-0xb83fffff]
> [ 0.797870] pci_bus 0000:57: resource 2 [mem 0x8b7c00000-0x8d3bfffff 64bit pref]
> [ 0.797870] pci_bus 0000:82: resource 0 [io 0x8000-0x8fff]
> [ 0.797870] pci_bus 0000:82: resource 1 [mem 0x80400000-0x804fffff]
> [ 0.797871] pci_bus 0000:82: resource 2 [mem 0x8d3c00000-0x8d3dfffff 64bit pref]
> [ 0.797871] pci_bus 0000:83: resource 1 [mem 0x80500000-0x805fffff]
> [ 0.798227] PCI: CLS 64 bytes, default 64
> [ 0.798237] DMAR: No ATSR found
> [ 0.798237] DMAR: No SATC found
> [ 0.798238] DMAR: IOMMU feature fl1gp_support inconsistent
> [ 0.798239] DMAR: IOMMU feature pgsel_inv inconsistent
> [ 0.798239] DMAR: IOMMU feature nwfs inconsistent
> [ 0.798240] DMAR: IOMMU feature dit inconsistent
> [ 0.798240] DMAR: IOMMU feature sc_support inconsistent
> [ 0.798240] DMAR: IOMMU feature dev_iotlb_support inconsistent
> [ 0.798241] DMAR: dmar1: Using Queued invalidation
> [ 0.798243] DMAR: dmar0: Using Queued invalidation
> [ 0.798244] DMAR: dmar2: Using Queued invalidation
> [ 0.798374] pci 0000:00:05.0: Adding to iommu group 0
> [ 0.798389] pci 0000:00:02.0: Adding to iommu group 1
> [ 0.798615] pci 0000:00:00.0: Adding to iommu group 2
> [ 0.798619] pci 0000:00:04.0: Adding to iommu group 3
> [ 0.798625] pci 0000:00:07.0: Adding to iommu group 4
> [ 0.798630] pci 0000:00:07.1: Adding to iommu group 5
> [ 0.798635] pci 0000:00:07.2: Adding to iommu group 6
> [ 0.798639] pci 0000:00:08.0: Adding to iommu group 7
> [ 0.798642] pci 0000:00:0a.0: Adding to iommu group 8
> [ 0.798651] pci 0000:00:0d.0: Adding to iommu group 9
> [ 0.798655] pci 0000:00:0d.2: Adding to iommu group 9
> [ 0.798660] pci 0000:00:0d.3: Adding to iommu group 9
> [ 0.798667] pci 0000:00:14.0: Adding to iommu group 10
> [ 0.798671] pci 0000:00:14.2: Adding to iommu group 10
> [ 0.798675] pci 0000:00:14.3: Adding to iommu group 11
> [ 0.798686] pci 0000:00:15.0: Adding to iommu group 12
> [ 0.798690] pci 0000:00:15.1: Adding to iommu group 12
> [ 0.798695] pci 0000:00:15.2: Adding to iommu group 12
> [ 0.798699] pci 0000:00:15.3: Adding to iommu group 12
> [ 0.798705] pci 0000:00:16.0: Adding to iommu group 13
> [ 0.798712] pci 0000:00:19.0: Adding to iommu group 14
> [ 0.798716] pci 0000:00:19.1: Adding to iommu group 14
> [ 0.798727] pci 0000:00:1c.0: Adding to iommu group 15
> [ 0.798734] pci 0000:00:1d.0: Adding to iommu group 16
> [ 0.798741] pci 0000:00:1e.0: Adding to iommu group 17
> [ 0.798746] pci 0000:00:1e.3: Adding to iommu group 17
> [ 0.798755] pci 0000:00:1f.0: Adding to iommu group 18
> [ 0.798760] pci 0000:00:1f.3: Adding to iommu group 18
> [ 0.798764] pci 0000:00:1f.5: Adding to iommu group 18
> [ 0.798776] pci 0000:82:00.0: Adding to iommu group 19
> [ 0.798781] pci 0000:83:00.0: Adding to iommu group 20
> [ 0.799714] DMAR: Intel(R) Virtualization Technology for Directed I/O
> [ 0.799714] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 0.799715] software IO TLB: mapped [mem 0x000000006e85b000-0x000000007685b000] (128MB)
> [ 0.799718] ACPI: bus type thunderbolt registered
> [ 0.799726] pci 0000:00:0d.2: attach allowed to drvr thunderbolt [internal device]
> [ 0.852477] pci 0000:00:0d.3: attach allowed to drvr thunderbolt [internal device]
> [ 0.909476] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
> [ 0.909477] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
> [ 0.909478] RAPL PMU: hw unit of domain package 2^-14 Joules
> [ 0.909478] RAPL PMU: hw unit of domain psys 2^-14 Joules
> [ 0.912263] kvm: already loaded vendor module 'kvm_intel'
> [ 0.912265] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26bef67878b, max_idle_ns: 440795293631 ns
> [ 0.912279] clocksource: Switched to clocksource tsc
> [ 0.912961] Initialise system trusted keyrings
> [ 0.912993] workingset: timestamp_bits=62 max_order=23 bucket_order=0
> [ 0.913493] squashfs: version 4.0 (2009/01/31) Phillip Lougher
> [ 0.913517] Registering esdfs 0.2
> [ 0.913537] alt_syscall: table 'read_write_test' available.
> [ 0.913542] alt_syscall: table 'android' available.
> [ 0.913547] alt_syscall: table 'android_permissive' available.
> [ 0.913551] alt_syscall: table 'third_party' available.
> [ 0.913554] alt_syscall: table 'third_party_permissive' available.
> [ 0.913558] alt_syscall: table 'complete' available.
> [ 0.913561] alt_syscall: table 'complete_permissive' available.
> [ 0.915253] Key type asymmetric registered
> [ 0.915254] Asymmetric key parser 'x509' registered
> [ 0.915259] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
> [ 0.915261] io scheduler mq-deadline registered
> [ 0.915261] io scheduler kyber registered
> [ 0.915273] io scheduler bfq registered
> [ 0.915754] gpiochip_find_base: found new base at 664
> [ 0.917106] gpio gpiochip0: (INTC1055:00): created GPIO range 0->25 ==> INTC1055:00 PIN 0->25
> [ 0.917108] gpio gpiochip0: (INTC1055:00): created GPIO range 32->47 ==> INTC1055:00 PIN 26->41
> [ 0.917109] gpio gpiochip0: (INTC1055:00): created GPIO range 64->88 ==> INTC1055:00 PIN 42->66
> [ 0.917110] gpio gpiochip0: (INTC1055:00): created GPIO range 96->103 ==> INTC1055:00 PIN 67->74
> [ 0.917111] gpio gpiochip0: (INTC1055:00): created GPIO range 128->151 ==> INTC1055:00 PIN 75->98
> [ 0.917112] gpio gpiochip0: (INTC1055:00): created GPIO range 160->180 ==> INTC1055:00 PIN 99->119
> [ 0.917113] gpio gpiochip0: (INTC1055:00): created GPIO range 192->215 ==> INTC1055:00 PIN 120->143
> [ 0.917114] gpio gpiochip0: (INTC1055:00): created GPIO range 224->250 ==> INTC1055:00 PIN 144->170
> [ 0.917115] gpio gpiochip0: (INTC1055:00): created GPIO range 256->279 ==> INTC1055:00 PIN 171->194
> [ 0.917116] gpio gpiochip0: (INTC1055:00): created GPIO range 288->312 ==> INTC1055:00 PIN 195->219
> [ 0.917117] gpio gpiochip0: (INTC1055:00): created GPIO range 320->344 ==> INTC1055:00 PIN 226->250
> [ 0.917117] gpio gpiochip0: (INTC1055:00): created GPIO range 352->359 ==> INTC1055:00 PIN 260->267
> [ 0.917166] gpio gpiochip0: (INTC1055:00): added GPIO chardev (254:0)
> [ 0.917177] gpio gpiochip0: registered GPIOs 664 to 1023 on INTC1055:00
> [ 0.917198] pci 0000:00:07.0: attach allowed to drvr pcieport [internal device]
> [ 0.917395] pcieport 0000:00:07.0: PME: Signaling with IRQ 155
> [ 0.917429] pcieport 0000:00:07.0: AER: enabled with IRQ 155
> [ 0.917446] pcieport 0000:00:07.0: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
> [ 0.917521] pci 0000:00:07.1: attach allowed to drvr pcieport [internal device]
> [ 0.917679] pcieport 0000:00:07.1: PME: Signaling with IRQ 156
> [ 0.917710] pcieport 0000:00:07.1: AER: enabled with IRQ 156
> [ 0.917723] pcieport 0000:00:07.1: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
> [ 0.917787] pci 0000:00:07.2: attach allowed to drvr pcieport [internal device]
> [ 0.917945] pcieport 0000:00:07.2: PME: Signaling with IRQ 157
> [ 0.917994] pcieport 0000:00:07.2: AER: enabled with IRQ 157
> [ 0.918006] pcieport 0000:00:07.2: pciehp: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
> [ 0.918074] pci 0000:00:1c.0: attach allowed to drvr pcieport [internal device]
> [ 0.918088] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
> [ 0.918272] pcieport 0000:00:1c.0: PME: Signaling with IRQ 158
> [ 0.918325] pcieport 0000:00:1c.0: AER: enabled with IRQ 158
> [ 0.918346] pcieport 0000:00:1c.0: pciehp: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
> [ 0.918476] pci 0000:00:1d.0: attach allowed to drvr pcieport [internal device]
> [ 0.918650] pcieport 0000:00:1d.0: PME: Signaling with IRQ 159
> [ 0.918698] pcieport 0000:00:1d.0: AER: enabled with IRQ 159
> [ 0.918781] Monitor-Mwait will be used to enter C-1 state
> [ 0.918785] Monitor-Mwait will be used to enter C-2 state
> [ 0.918789] Monitor-Mwait will be used to enter C-3 state
> [ 0.918791] ACPI: \_SB_.CP00: Found 3 idle states
> [ 0.919108] ACPI: AC: AC Adapter [AC] (on-line)
> [ 0.919158] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/PNP0C09:00/PNP0C0D:00/input/input0
> [ 0.919247] ACPI: button: Lid Switch [LID0]
> [ 0.919274] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 0.919333] ACPI: button: Power Button [PWRF]
> [ 0.920123] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> [ 0.920499] hpet_acpi_add: no address or irqs in _CRS
> [ 0.920519] ACPI: battery: Slot [BAT0] (battery present)
> [ 0.920524] Non-volatile memory driver v1.3
> [ 0.928419] ACPI: bus type drm_connector registered
> [ 0.928514] pci 0000:00:02.0: attach allowed to drvr i915 [internal device]
> [ 0.929094] i915 0000:00:02.0: [drm] VT-d active for gfx access
> [ 0.929143] i915 0000:00:02.0: [drm] Using Transparent Hugepages
> [ 0.980578] i915 0000:00:02.0: Direct firmware load for i915/adlp_dmc.bin failed with error -2
> [ 0.980587] i915 0000:00:02.0: Direct firmware load for i915/adlp_dmc_ver2_16.bin failed with error -2
> [ 0.980588] i915 0000:00:02.0: [drm] Failed to load DMC firmware i915/adlp_dmc.bin. Disabling runtime power management.
> [ 0.980589] i915 0000:00:02.0: [drm] DMC firmware homepage:https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
> [ 0.991524] i915 0000:00:02.0: [drm] GuC firmware i915/adlp_guc_70.bin (70.5) is recommended, but only i915/adlp_guc_69.0.3.bin (69.0) was found
> [ 0.991528] i915 0000:00:02.0: [drm] Consider updating your linux-firmware pkg or downloading fromhttps://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
> [ 0.991634] i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc.bin (0.0) is recommended, but only i915/tgl_huc_7.9.3.bin (7.9) was found
> [ 0.991635] i915 0000:00:02.0: [drm] Consider updating your linux-firmware pkg or downloading fromhttps://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
> [ 0.996114] i915 0000:00:02.0: [drm] GuC firmware i915/adlp_guc_69.0.3.bin version 69.0.3
> [ 0.996118] i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc_7.9.3.bin version 7.9.3
> [ 1.013102] i915 0000:00:02.0: [drm] HuC authenticated
> [ 1.013675] i915 0000:00:02.0: [drm] GuC submission enabled
> [ 1.013676] i915 0000:00:02.0: [drm] GuC SLPC enabled
> [ 1.014174] i915 0000:00:02.0: [drm] GuC RC: enabled
> [ 1.014874] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
> [ 2.137297] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
> [ 2.137528] usbcore: registered new interface driver udl
> [ 2.139589] loop: module loaded
> [ 2.139628] lkdtm: No crash points registered, enable through debugfs
> [ 2.139647] pci 0000:00:16.0: attach allowed to drvr mei_me [internal device]
> [ 2.139713] pci 0000:00:15.0: attach allowed to drvr intel-lpss [internal device]
> [ 2.140055] idma64 idma64.0: Found Intel integrated DMA 64-bit
> [ 2.141566] i2c_designware i2c_designware.0: GPIO lookup for consumer scl
> [ 2.141568] i2c_designware i2c_designware.0: using ACPI for GPIO lookup
> [ 2.141570] acpi device:17: GPIO: looking up scl-gpios
> [ 2.141571] acpi device:17: GPIO: looking up scl-gpio
> [ 2.141572] i2c_designware i2c_designware.0: using lookup tables for GPIO lookup
> [ 2.141573] i2c_designware i2c_designware.0: No GPIO consumer scl found
> [ 2.141903] pci 0000:00:15.1: attach allowed to drvr intel-lpss [internal device]
> [ 2.142108] idma64 idma64.1: Found Intel integrated DMA 64-bit
> [ 2.143623] i2c_designware i2c_designware.1: GPIO lookup for consumer scl
> [ 2.143626] i2c_designware i2c_designware.1: using ACPI for GPIO lookup
> [ 2.143627] acpi device:18: GPIO: looking up scl-gpios
> [ 2.143629] acpi device:18: GPIO: looking up scl-gpio
> [ 2.143630] i2c_designware i2c_designware.1: using lookup tables for GPIO lookup
> [ 2.143631] i2c_designware i2c_designware.1: No GPIO consumer scl found
> [ 2.145538] cr50_i2c i2c-GOOG0005:00: cr50 TPM 2.0 (i2c 0x50 irq 77 id 0x28)
> [ 2.145809] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops 0xffffffff86305760)
> [ 2.239753] pci 0000:00:15.2: attach allowed to drvr intel-lpss [internal device]
> [ 2.240078] idma64 idma64.2: Found Intel integrated DMA 64-bit
> [ 2.241878] i2c_designware i2c_designware.2: GPIO lookup for consumer scl
> [ 2.241879] i2c_designware i2c_designware.2: using ACPI for GPIO lookup
> [ 2.241881] acpi device:19: GPIO: looking up scl-gpios
> [ 2.241882] acpi device:19: GPIO: looking up scl-gpio
> [ 2.241883] i2c_designware i2c_designware.2: using lookup tables for GPIO lookup
> [ 2.241884] i2c_designware i2c_designware.2: No GPIO consumer scl found
> [ 2.242146] pci 0000:00:15.3: attach allowed to drvr intel-lpss [internal device]
> [ 2.242344] idma64 idma64.3: Found Intel integrated DMA 64-bit
> [ 2.243801] i2c_designware i2c_designware.3: GPIO lookup for consumer scl
> [ 2.243803] i2c_designware i2c_designware.3: using ACPI for GPIO lookup
> [ 2.243804] acpi device:1a: GPIO: looking up scl-gpios
> [ 2.243804] acpi device:1a: GPIO: looking up scl-gpio
> [ 2.243805] i2c_designware i2c_designware.3: using lookup tables for GPIO lookup
> [ 2.243806] i2c_designware i2c_designware.3: No GPIO consumer scl found
> [ 2.244349] pci 0000:00:19.0: attach allowed to drvr intel-lpss [internal device]
> [ 2.256143] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002)
> [ 2.256348] idma64 idma64.4: Found Intel integrated DMA 64-bit
> [ 2.257736] i2c_designware i2c_designware.4: GPIO lookup for consumer scl
> [ 2.257737] i2c_designware i2c_designware.4: using ACPI for GPIO lookup
> [ 2.257738] acpi device:1b: GPIO: looking up scl-gpios
> [ 2.257739] acpi device:1b: GPIO: looking up scl-gpio
> [ 2.257740] i2c_designware i2c_designware.4: using lookup tables for GPIO lookup
> [ 2.257740] i2c_designware i2c_designware.4: No GPIO consumer scl found
> [ 2.257934] pci 0000:00:19.1: attach allowed to drvr intel-lpss [internal device]
> [ 2.258139] idma64 idma64.5: Found Intel integrated DMA 64-bit
> [ 2.259541] i2c_designware i2c_designware.5: GPIO lookup for consumer scl
> [ 2.259542] i2c_designware i2c_designware.5: using ACPI for GPIO lookup
> [ 2.259544] acpi device:1c: GPIO: looking up scl-gpios
> [ 2.259544] acpi device:1c: GPIO: looking up scl-gpio
> [ 2.259545] i2c_designware i2c_designware.5: using lookup tables for GPIO lookup
> [ 2.259546] i2c_designware i2c_designware.5: No GPIO consumer scl found
> [ 2.259756] pci 0000:00:1e.0: attach allowed to drvr intel-lpss [internal device]
> [ 2.259972] idma64 idma64.6: Found Intel integrated DMA 64-bit
> [ 2.260248] dw-apb-uart dw-apb-uart.6: GPIO lookup for consumer rs485-term
> [ 2.260250] dw-apb-uart dw-apb-uart.6: using ACPI for GPIO lookup
> [ 2.260252] acpi device:23: GPIO: looking up rs485-term-gpios
> [ 2.260252] acpi device:23: GPIO: looking up rs485-term-gpio
> [ 2.260253] dw-apb-uart dw-apb-uart.6: using lookup tables for GPIO lookup
> [ 2.260254] dw-apb-uart dw-apb-uart.6: No GPIO consumer rs485-term found
> [ 2.260258] dw-apb-uart.6: ttyS0 at MMIO 0xfe03e000 (irq = 23, base_baud = 114825) is a 16550A
> [ 2.260453] pci 0000:00:1e.3: attach allowed to drvr intel-lpss [internal device]
> [ 2.272499] idma64 idma64.7: Found Intel integrated DMA 64-bit
> [ 2.274962] pci 0000:83:00.0: attach allowed to drvr nvme [internal device]
> [ 2.275085] nvme nvme0: pci function 0000:83:00.0
> [ 2.275209] mdio_bus fixed-0: GPIO lookup for consumer reset
> [ 2.275210] mdio_bus fixed-0: using lookup tables for GPIO lookup
> [ 2.275211] mdio_bus fixed-0: No GPIO consumer reset found
> [ 2.275212] PPP generic driver version 2.4.2
> [ 2.275427] PPP MPPE Compression module registered
> [ 2.275470] pci 0000:00:0d.0: attach allowed to drvr xhci_hcd [internal device]
> [ 2.275496] xhci_hcd 0000:00:0d.0: xHCI Host Controller
> [ 2.275512] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
> [ 2.276610] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
> [ 2.276731] xhci_hcd 0000:00:0d.0: xHCI Host Controller
> [ 2.276845] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
> [ 2.276846] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
> [ 2.276869] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
> [ 2.276870] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.276871] usb usb1: Product: xHCI Host Controller
> [ 2.276872] usb usb1: Manufacturer: Linux 6.1.15-01642-g2f18a077d91a xhci-hcd
> [ 2.276873] usb usb1: SerialNumber: 0000:00:0d.0
> [ 2.276930] hub 1-0:1.0: USB hub found
> [ 2.276936] hub 1-0:1.0: 1 port detected
> [ 2.276993] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
> [ 2.276995] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.276995] usb usb2: Product: xHCI Host Controller
> [ 2.276996] usb usb2: Manufacturer: Linux 6.1.15-01642-g2f18a077d91a xhci-hcd
> [ 2.276996] usb usb2: SerialNumber: 0000:00:0d.0
> [ 2.277035] hub 2-0:1.0: USB hub found
> [ 2.277042] hub 2-0:1.0: 3 ports detected
> [ 2.277142] pci 0000:00:14.0: attach allowed to drvr xhci_hcd [internal device]
> [ 2.277274] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 2.277331] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
> [ 2.278475] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000100200009810
> [ 2.278668] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [ 2.278776] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
> [ 2.278778] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
> [ 2.278800] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
> [ 2.278802] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.278802] usb usb3: Product: xHCI Host Controller
> [ 2.278803] usb usb3: Manufacturer: Linux 6.1.15-01642-g2f18a077d91a xhci-hcd
> [ 2.278803] usb usb3: SerialNumber: 0000:00:14.0
> [ 2.278853] hub 3-0:1.0: USB hub found
> [ 2.278871] hub 3-0:1.0: 12 ports detected
> [ 2.279113] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
> [ 2.279114] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.279115] usb usb4: Product: xHCI Host Controller
> [ 2.279115] usb usb4: Manufacturer: Linux 6.1.15-01642-g2f18a077d91a xhci-hcd
> [ 2.279116] usb usb4: SerialNumber: 0000:00:14.0
> [ 2.279239] hub 4-0:1.0: USB hub found
> [ 2.279251] hub 4-0:1.0: 4 ports detected
> [ 2.279355] usbcore: registered new interface driver cdc_acm
> [ 2.279356] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
> [ 2.279499] usbcore: registered new interface driver uas
> [ 2.279512] usbcore: registered new interface driver usb-storage
> [ 2.279529] usbcore: registered new interface driver ums-realtek
> [ 2.279550] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> [ 2.279551] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
> [ 2.280691] i8042: Warning: Keylock active
> [ 2.280880] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 2.282282] rtc_cmos 00:03: RTC can wake from S4
> [ 2.283140] rtc_cmos 00:03: registered as rtc0
> [ 2.283141] rtc_cmos 00:03: GPIO lookup for consumer wp
> [ 2.283142] rtc_cmos 00:03: using ACPI for GPIO lookup
> [ 2.283143] acpi PNP0B00:00: GPIO: looking up wp-gpios
> [ 2.283147] acpi PNP0B00:00: GPIO: looking up wp-gpio
> [ 2.283148] rtc_cmos 00:03: using lookup tables for GPIO lookup
> [ 2.283148] rtc_cmos 00:03: No GPIO consumer wp found
> [ 2.283168] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
> [ 2.283177] i2c_dev: i2c /dev entries driver
> [ 2.284619] Consider using thermal netlink events interface
> [ 2.285306] pci 0000:00:04.0: attach allowed to drvr proc_thermal_pci [internal device]
> [ 2.285662] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
> [ 2.285979] intel_rapl_common: Found RAPL domain package
> [ 2.287073] iTCO_vendor_support: vendor-support=0
> [ 2.287218] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised:dm-devel@redhat.com
> [ 2.287302] device-mapper: verity-chromeos: dm-verity-chromeos registered
> [ 2.287304] intel_pstate: Intel P-state driver initializing
> [ 2.288211] intel_pstate: HWP enabled
> [ 2.288219] sdhci: Secure Digital Host Controller Interface driver
> [ 2.288219] sdhci: Copyright(c) Pierre Ossman
> [ 2.288229] pci 0000:82:00.0: attach allowed to drvr sdhci-pci [internal device]
> [ 2.288256] sdhci-pci 0000:82:00.0: SDHCI controller found [17a0:9755] (rev 0)
> [ 2.288494] Registered efivars operations
> [ 2.288496] gsmi version 1.0 loaded
> [ 2.288548] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:82:00.0
> [ 2.288792] hid: raw HID events driver (C) Jiri Kosina
> [ 2.288828] sdhci-pci 0000:82:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
> [ 2.288831] sdhci-pci 0000:82:00.0: device [17a0:9755] error status/mask=00001000/00002000
> [ 2.288834] sdhci-pci 0000:82:00.0: [12] Timeout
> [ 2.288950] usbcore: registered new interface driver usbhid
> [ 2.288951] usbhid: USB HID core driver
> [ 2.292344] intel_pmc_core INT33A1:00: initialized
> [ 2.292357] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:82:00.0
> [ 2.292377] intel_telemetry_core Init
> [ 2.292383] pci 0000:00:0a.0: attach allowed to drvr intel_vsec [internal device]
> [ 2.292734] acpi INTC1026:00: GPIO: looking up 0 in _CRS
> [ 2.292775] chromeos ramoops using acpi device.
> [ 2.293356] printk: console [ramoops-1] enabled
> [ 2.293417] pstore: Registered ramoops as persistent store backend
> [ 2.293419] ramoops: using 0x100000@0x7689d000, ecc: 0
> [ 2.294548] spi_master spi0: will run message pump with realtime priority
> [ 2.294551] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:82:00.0
> [ 2.294618] elan_i2c i2c-ELAN0000:00: supply vcc not found, using dummy regulator
> [ 2.298446] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
> [ 2.298462] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
> [ 2.298465] pcieport 0000:00:1c.0: device [8086:51bf] error status/mask=00001000/00002000
> [ 2.298469] pcieport 0000:00:1c.0: [12] Timeout
> [ 2.298491] mmc0: SDHCI controller on PCI [0000:82:00.0] using ADMA 64-bit
> [ 2.299425] cros-ec-dev cros-ec-dev.5.auto: CrOS Fingerprint MCU detected
> [ 2.301162] cros_ec_lpcs GOOG0004:00: Chrome EC device registered
> [ 2.302576] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:82:00.0
> [ 2.303690] intel_rapl_msr: PL4 support detected.
> [ 2.303703] intel_rapl_common: Found RAPL domain package
> [ 2.303706] intel_rapl_common: Found RAPL domain core
> [ 2.303707] intel_rapl_common: Found RAPL domain uncore
> [ 2.303709] intel_rapl_common: Found RAPL domain psys
> [ 2.303720] cros-ec-spi spi-PRP0001:02: Chrome EC device registered
> [ 2.304388] nvme nvme0: 12/0/0 default/read/poll queues
> [ 2.306040] sdhci-pci 0000:82:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
> [ 2.306043] sdhci-pci 0000:82:00.0: device [17a0:9755] error status/mask=00001000/00002000
> [ 2.306045] sdhci-pci 0000:82:00.0: [12] Timeout
> [ 2.309533] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
> [ 2.309539] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
> [ 2.309541] pcieport 0000:00:1c.0: device [8086:51bf] error status/mask=00001000/00002000
> [ 2.309544] pcieport 0000:00:1c.0: [12] Timeout
> [ 2.309570] nvme nvme0: Ignoring bogus Namespace Identifiers
> [ 2.310047] GACT probability NOT on
> [ 2.310780] xt_time: kernel timezone is -0000
> [ 2.310819] Initializing XFRM netlink socket
> [ 2.310866] NET: Registered PF_INET6 protocol family
> [ 2.310995] Segment Routing with IPv6
> [ 2.311007] In-situ OAM (IOAM) with IPv6
> [ 2.311026] NET: Registered PF_PACKET protocol family
> [ 2.311029] NET: Registered PF_KEY protocol family
> [ 2.311409] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
> [ 2.311957] microcode: sig=0xb06a3, pf=0x80, revision=0x4111
> [ 2.312226] microcode: Microcode Update Driver: v2.2.
> [ 2.312229] IPI shorthand broadcast: enabled
> [ 2.312234] AVX2 version of gcm_enc/dec engaged.
> [ 2.312709] AES CTR mode by8 optimization enabled
> [ 2.312865] sched_clock: Marking stable (2306466206, 6387792)->(2328460951, -15606953)
> [ 2.313045] registered taskstats version 1
> [ 2.313050] Loading compiled-in X.509 certificates
> [ 2.313067] Key type .fscrypt registered
> [ 2.313068] Key type fscrypt-provisioning registered
> [ 2.313146] pstore: Using crash dump compression: deflate
> [ 2.313284] Key type encrypted registered
> [ 2.340172] input: cros_ec_buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/GOOG0004:00/GOOG0007:00/input/input3
> [ 2.340647] PM: Magic number: 15:818:935
> [ 2.340812] i2c i2c-PRP0001:01: hash matches
> [ 2.340824] dma dma0chan0: hash matches
> [ 2.341195] device-mapper: init: waiting for all devices to be available before creating mapped devices
> [ 2.396228] input: ELAN9050:00 04F3:2DFD as /devices/pci0000:00/0000:00:15.3/i2c_designware.3/i2c-17/i2c-ELAN9050:00/0018:04F3:2DFD.0001/input/input4
> [ 2.396332] input: ELAN9050:00 04F3:2DFD UNKNOWN as /devices/pci0000:00/0000:00:15.3/i2c_designware.3/i2c-17/i2c-ELAN9050:00/0018:04F3:2DFD.0001/input/input5
> [ 2.396436] input: ELAN9050:00 04F3:2DFD UNKNOWN as /devices/pci0000:00/0000:00:15.3/i2c_designware.3/i2c-17/i2c-ELAN9050:00/0018:04F3:2DFD.0001/input/input6
> [ 2.396542] input: ELAN9050:00 04F3:2DFD Stylus as /devices/pci0000:00/0000:00:15.3/i2c_designware.3/i2c-17/i2c-ELAN9050:00/0018:04F3:2DFD.0001/input/input7
> [ 2.396648] input: ELAN9050:00 04F3:2DFD UNKNOWN as /devices/pci0000:00/0000:00:15.3/i2c_designware.3/i2c-17/i2c-ELAN9050:00/0018:04F3:2DFD.0001/input/input8
> [ 2.396797] hid-multitouch 0018:04F3:2DFD.0001: input,hidraw0: I2C HID v1.00 Device [ELAN9050:00 04F3:2DFD] on i2c-ELAN9050:00
> [ 2.411625] elan_i2c i2c-ELAN0000:00: Elan Touchpad: Module ID: 0x0113, Firmware: 0x00a0, Sample: 0x0006, IAP: 0x0002
> [ 2.411921] input: Elan Touchpad as /devices/pci0000:00/0000:00:19.1/i2c_designware.5/i2c-19/i2c-ELAN0000:00/input/input11
> [ 2.412368] device-mapper: table: 254:0: verity: Data device lookup failed (-EPERM)
> [ 2.412372] device-mapper: ioctl: error adding target to table
> [ 2.412623] ALSA device list:
> [ 2.412626] No soundcards found.
> [ 2.412636] Warning: unable to open an initial console.
> [ 2.414192] EXT4-fs (nvme0n1p3): mounting ext2 file system using the ext4 subsystem
> [ 2.414689] EXT4-fs (nvme0n1p3): warning: mounting unchecked fs, running e2fsck is recommended
> [ 2.417019] EXT4-fs (nvme0n1p3): mounted filesystem without journal. Quota mode: none.
> [ 2.417030] VFS: Mounted root (ext2 filesystem) on device 259:3.
> [ 2.417484] devtmpfs: mounted
> [ 2.421386] Freeing unused kernel image (initmem) memory: 1940K
> [ 2.428472] Write protecting the kernel read-only data: 26624k
> [ 2.429634] Freeing unused kernel image (text/rodata gap) memory: 2036K
> [ 2.430233] Freeing unused kernel image (rodata/data gap) memory: 1296K
> [ 2.430252] Run /sbin/init as init process
> [ 2.430256] with arguments:
> [ 2.430257] /sbin/init
> [ 2.430259] cros_secure
> [ 2.430260] cros_debug
> [ 2.430261] noresume
> [ 2.430262] noswap
> [ 2.430263] with environment:
> [ 2.430264] HOME=/
> [ 2.430265] TERM=linux
> [ 2.430267] dm=1 vroot none ro 1,0 6348800 verity payload=ROOT_DEV hashtree=HASH_DEV hashstart=6348800 alg=sha256 root_hexdigest=0366e3e4513a397e0c251ddd703a03cbd06f8de6ed9f2a1f7ad6617f30a44817 salt=cf6734dadd53d9e3adcabf0ee4138b94df54df8d8095f1a8fec6f49fb90b63e8
> [ 2.430269] boot=local
> [ 2.430270] xdomain=0
> [ 2.447725] audit: type=1404 audit(1678366501.317:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
> [ 2.471121] SELinux: Permission nlmsg_getneigh in class netlink_route_socket not defined in policy.
> [ 2.471145] SELinux: Permission bpf in class capability2 not defined in policy.
> [ 2.471148] SELinux: Permission checkpoint_restore in class capability2 not defined in policy.
> [ 2.471159] SELinux: Permission bpf in class cap2_userns not defined in policy.
> [ 2.471162] SELinux: Permission checkpoint_restore in class cap2_userns not defined in policy.
> [ 2.471186] SELinux: Class mctp_socket not defined in policy.
> [ 2.471190] SELinux: Class anon_inode not defined in policy.
> [ 2.471192] SELinux: Class io_uring not defined in policy.
> [ 2.471194] SELinux: Class user_namespace not defined in policy.
> [ 2.471196] SELinux: the above unknown classes and permissions will be denied
> [ 2.472561] SELinux: policy capability network_peer_controls=1
> [ 2.472564] SELinux: policy capability open_perms=1
> [ 2.472567] SELinux: policy capability extended_socket_class=1
> [ 2.472569] SELinux: policy capability always_check_network=0
> [ 2.472571] SELinux: policy capability cgroup_seclabel=0
> [ 2.472572] SELinux: policy capability nnp_nosuid_transition=1
> [ 2.472574] SELinux: policy capability genfs_seclabel_symlinks=0
> [ 2.472576] SELinux: policy capability ioctl_skip_cloexec=0
> [ 2.506505] audit: type=1403 audit(1678366501.376:3): auid=4294967295 ses=4294967295 lsm=selinux res=1
> [ 2.514225] usb 3-1: new low-speed USB device number 2 using xhci_hcd
> [ 2.566847] SELinux: Context u:object_r:cros_run_pvm_opt:s0 is not valid (left unmapped).
> [ 2.566927] SELinux: Context u:object_r:cros_run_pvm_opt_pita:s0 is not valid (left unmapped).
> [ 2.568210] audit: type=1400 audit(1678366501.438:4): avc: granted { execute } for pid=243 comm="sh" name="crash_reporter" dev="nvme0n1p3" ino=41890 scontext=u:r:cros_init_scripts:s0 tcontext=u:object_r:cros_crash_reporter_exec:s0 tclass=file
> [ 2.633476] init: early-failure main process (244) terminated with status 124
> [ 2.642389] loop0: detected capacity change from 0 to 920
> [ 2.644625] usb 3-1: No LPM exit latency info found, disabling LPM.
> [ 2.651136] usb 3-1: New USB device found, idVendor=04e8, idProduct=4000, bcdDevice= 4.45
> [ 2.651145] usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
> [ 2.651149] usb 3-1: Product: Portable SSD X5
> [ 2.651153] usb 3-1: Manufacturer: SAMSUNG ELECTRONICS CO., LTD
> [ 2.651156] usb 3-1: SerialNumber: 950740060FDD0F962F43B8088B49A646
> [ 2.654950] udevd[261]: starting version 225
> [ 2.657348] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
> [ 2.672379] udevd[262]: invalid key/value pair in file /lib/udev/rules.d/99-mei_driver_files.rules on line 1, starting at character 1 ('/')
> [ 2.672385] udevd[262]: invalid key/value pair in file /lib/udev/rules.d/99-mei_driver_files.rules on line 2, starting at character 1 ('/')
> [ 2.672388] udevd[262]: invalid key/value pair in file /lib/udev/rules.d/99-mei_driver_files.rules on line 3, starting at character 1 ('/')
> [ 2.690195] LoadPin: nvme0n1p3 (259:3): writable
> [ 2.690210] LoadPin: enforcement can be disabled.
> [ 2.690217] LoadPin: kernel-module pinned obj="/lib/modules/6.1.15-01642-g2f18a077d91a/kernel/drivers/input/joydev.ko.gz" pid=273 cmdline="udevd --daemon"
> [ 2.760021] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
> [ 2.787818] usb 4-1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.33
> [ 2.787825] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 2.787827] usb 4-1: Product: 4-Port USB 3.0 Hub
> [ 2.787829] usb 4-1: Manufacturer: Generic
> [ 2.795930] hub 4-1:1.0: USB hub found
> [ 2.797256] hub 4-1:1.0: 4 ports detected
> [ 2.802029] frecon[527]: Frecon using drm driver i915, version 1.6, date(20201103), desc(Intel Graphics) using atomic
> [ 2.838338] frecon[527]: Frecon using drm driver i915, version 1.6, date(20201103), desc(Intel Graphics) using atomic
> [ 2.892238] usb 3-9: new high-speed USB device number 3 using xhci_hcd
> [ 2.945347] udevd[545]: Process '/usr/bin/dbus-send --system --dest=org.chromium.ResourceManager /org/chromium/ResourceManager org.chromium.ResourceManager.PowerSupplyChange' failed with exit code 1.
> [ 3.041397] usb 3-9: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.33
> [ 3.041423] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 3.041433] usb 3-9: Product: 4-Port USB 2.0 Hub
> [ 3.041441] usb 3-9: Manufacturer: Generic
> [ 3.044579] hub 3-9:1.0: USB hub found
> [ 3.045834] hub 3-9:1.0: 4 ports detected
> [ 3.104679] usb 4-1.4: new SuperSpeed USB device number 3 using xhci_hcd
> [ 3.109281] EXT4-fs (dm-3): recovery complete
> [ 3.111331] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: journalled.
> [ 3.112105] EXT4-fs (nvme0n1p8): mounted filesystem without journal. Quota mode: none.
> [ 3.117071] usb 4-1.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
> [ 3.117081] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
> [ 3.117085] usb 4-1.4: Product: USB 10/100/1000 LAN
> [ 3.117089] usb 4-1.4: Manufacturer: Realtek
> [ 3.117092] usb 4-1.4: SerialNumber: 000001000000
> [ 3.127564] EXT4-fs (dm-3): re-mounted. Quota mode: journalled.
> [ 3.138928] usbcore: registered new interface driver r8152
> [ 3.141948] usbcore: registered new interface driver cdc_ether
> [ 3.142538] usbcore: registered new interface driver r8153_ecm
> [ 3.230124] usb 3-10: new full-speed USB device number 4 using xhci_hcd
> [ 3.358508] usb 3-10: New USB device found, idVendor=8087, idProduct=0033, bcdDevice= 0.00
> [ 3.358526] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 3.408566] Bluetooth: bt_init() Core ver 2.22
> [ 3.408589] NET: Registered PF_BLUETOOTH protocol family
> [ 3.408590] Bluetooth: bt_init() HCI device and connection manager initialized
> [ 3.408593] Bluetooth: hci_sock_init() HCI socket layer initialized
> [ 3.408594] Bluetooth: l2cap_init_sockets() L2CAP socket layer initialized
> [ 3.408598] Bluetooth: sco_init() SCO socket layer initialized
> [ 3.413846] usb 3-10: GPIO lookup for consumer reset
> [ 3.413849] usb 3-10: using ACPI for GPIO lookup
> [ 3.413851] acpi device:34: GPIO: looking up reset-gpios
> [ 3.413853] acpi device:34: GPIO: looking up reset-gpio
> [ 3.413855] acpi device:34: GPIO: _DSD returned device:34 0 0 1
> [ 3.413942] gpio gpiochip0: Persistence not supported for GPIO 164
> [ 3.414048] usbcore: registered new interface driver btusb
> [ 3.416546] Bluetooth: btintel_version_info_tlv() hci0: Device revision is 0
> [ 3.416549] Bluetooth: btintel_version_info_tlv() hci0: Secure boot is enabled
> [ 3.416551] Bluetooth: btintel_version_info_tlv() hci0: OTP lock is enabled
> [ 3.416551] Bluetooth: btintel_version_info_tlv() hci0: API lock is enabled
> [ 3.416557] Bluetooth: btintel_version_info_tlv() hci0: Debug lock is disabled
> [ 3.416557] Bluetooth: btintel_version_info_tlv() hci0: Minimum firmware build 1 week 10 2014
> [ 3.416559] Bluetooth: btintel_version_info_tlv() hci0: Bootloader timestamp 2019.40 buildtype 1 build 38
> [ 3.417487] Bluetooth: btintel_prepare_fw_download_tlv() hci0: Found device firmware: intel/ibt-0040-0041.sfi
> [ 3.417506] Bluetooth: btintel_firmware_version() hci0: Boot Address: 0x100800
> [ 3.417508] Bluetooth: btintel_firmware_version() hci0: Firmware Version: 35-4.23
> [ 3.426457] usb 4-1.4: reset SuperSpeed USB device number 3 using xhci_hcd
> [ 3.468949] r8152 4-1.4:1.0: load rtl8153a-3 v2 02/07/20 successfully
> [ 3.493914] r8152 4-1.4:1.0 eth0: v1.12.13
> [ 3.574557] udevd[648]: conflicting device node '/dev/mapper/encstateful' found, link to '/dev/dm-5' will not be created
> [ 3.614980] EXT4-fs (dm-5): 2 orphan inodes deleted
> [ 3.614992] EXT4-fs (dm-5): recovery complete
> [ 3.625997] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Quota mode: none.
> [ 3.696707] encrypted-reboo (pid 662) is setting deprecated v1 encryption policy; recommend upgrading to v2.
> [ 3.697699] audit: type=1400 audit(1678366502.567:5): avc: granted { execute } for pid=663 comm="chromeos_startu" name="crash_reporter" dev="nvme0n1p3" ino=41890 scontext=u:r:chromeos_startup:s0 tcontext=u:object_r:cros_crash_reporter_exec:s0 tclass=file
> [ 3.758205] SELinux: Context u:object_r:cros_modemfwd_file:s0 is not valid (left unmapped).
> [ 3.931585] /dev/A5GEVOXPBBG11XSG/dev-image: Can't open blockdev
> [ 3.933149] EXT4-fs (dm-3): re-mounted. Quota mode: journalled.
> [ 3.947387] udevd[796]: Process '/usr/bin/dbus-send --system --dest=org.chromium.ResourceManager /org/chromium/ResourceManager org.chromium.ResourceManager.PowerSupplyChange' failed with exit code 1.
> [ 3.955114] low_mem: threshold[0] 1658 MB
> [ 3.955118] low_mem: threshold[1] 12755 MB
> [ 3.960324] zram: Added device: zram0
> [ 4.046109] zram0: detected capacity change from 0 to 127553600
> [ 4.058706] Adding 63776796k swap on /dev/zram0. Priority:-2 extents:1 across:63776796k SS
> [ 4.113308] cros-ec-light-prox: probe of cros-ec-light.17.auto failed with error -22
> [ 4.116467] udevd[1089]: Process '/sbin/restorecon /dev/iio:device1' failed with exit code 255.
> [ 4.173993] gpio gpiochip0: Persistence not supported for GPIO 335
> [ 4.206042] Intel(R) Wireless WiFi driver for Linux
> [ 4.206119] pci 0000:00:14.3: attach allowed to drvr iwlwifi [internal device]
> [ 4.210359] iwlwifi 0000:00:14.3: Detected crf-id 0x400410, cnv-id 0x80400 wfpm id 0x80000020
> [ 4.210402] iwlwifi 0000:00:14.3: PCI dev 51f1/0090, rev=0x370, rfid=0x2010d000
> [ 4.214007] iwlwifi 0000:00:14.3: api flags index 2 larger than supported by driver
> [ 4.214032] iwlwifi 0000:00:14.3: WRT: Invalid time point 28 for host command TLV
> [ 4.214035] iwlwifi 0000:00:14.3: WRT: Failed to allocate TLV 0x1000007, ret -22, (ext=0)
> [ 4.214039] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.41
> [ 4.214488] iwlwifi 0000:00:14.3: loaded firmware version 79.27f1c37b.0 so-a0-gf-a0-79.ucode op_mode iwlmvm
> [ 4.304370] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6E AX211 160MHz, REV=0x370
> [ 4.304410] thermal thermal_zone8: failed to read out thermal zone (-61)
> [ 4.377172] loop1: detected capacity change from 0 to 192920
> [ 4.474424] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x20
> [ 4.474439] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
> [ 4.474449] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x90
> [ 4.474457] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0
> [ 4.474798] iwlwifi 0000:00:14.3: loaded PNVM version 64acdc51
> [ 4.490406] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4
> [ 4.490479] iwlwifi 0000:00:14.3: Detected RF GF, rfid=0x2010d000
> [ 4.560397] iwlwifi 0000:00:14.3: base HW address: 54:6c:eb:32:43:b2
> [ 4.926551] init: failsafe-delay main process (1003) killed by TERM signal
> [ 4.927087] init: featured main process (2371) terminated with status 69
> [ 4.927097] init: featured main process ended, respawning
> [ 4.942172] init: featured main process (2443) terminated with status 69
> [ 4.942184] init: featured main process ended, respawning
> [ 4.950178] fuse: init (API version 7.37)
> [ 4.959193] init: featured main process (2489) terminated with status 69
> [ 4.959206] init: featured main process ended, respawning
> [ 4.964069] init: modemfwd main process (2400) terminated with status 69
> [ 4.972551] init: featured main process (2544) terminated with status 69
> [ 4.972562] init: featured main process ended, respawning
> [ 4.983804] init: featured main process (2570) terminated with status 69
> [ 4.983814] init: featured main process ended, respawning
> [ 4.994621] init: featured main process (2578) terminated with status 69
> [ 4.994636] init: featured main process ended, respawning
> [ 5.008063] init: featured main process (2600) terminated with status 69
> [ 5.008076] init: featured main process ended, respawning
> [ 5.022059] init: featured main process (2629) terminated with status 69
> [ 5.022076] init: featured main process ended, respawning
> [ 5.034497] init: featured main process (2652) terminated with status 69
> [ 5.034512] init: featured main process ended, respawning
> [ 5.042544] init: featured main process (2675) terminated with status 69
> [ 5.042558] init: featured main process ended, respawning
> [ 5.051403] init: featured main process (2703) terminated with status 69
> [ 5.051415] init: featured main process ended, respawning
> [ 5.058895] init: featured main process (2724) terminated with status 69
> [ 5.058909] init: featured main process ended, respawning
> [ 5.064833] fscrypt: AES-256-CTS-CBC using implementation "cts-cbc-aes-aesni"
> [ 5.069244] init: featured main process (2738) terminated with status 69
> [ 5.069255] init: featured main process ended, respawning
> [ 5.076612] init: featured main process (2759) terminated with status 69
> [ 5.076625] init: featured main process ended, respawning
> [ 5.085714] init: featured main process (2769) terminated with status 69
> [ 5.085726] init: featured main process ended, respawning
> [ 5.095399] init: featured main process (2778) terminated with status 69
> [ 5.095412] init: featured main process ended, respawning
> [ 5.104354] init: featured main process (2789) terminated with status 69
> [ 5.104365] init: featured respawning too fast, stopped
> [ 5.107870] Bluetooth: btintel_download_wait() hci0: Waiting for firmware download to complete
> [ 5.108459] Bluetooth: btintel_download_wait() hci0: Firmware loaded in 1651337 usecs
> [ 5.108753] Bluetooth: btintel_boot_wait() hci0: Waiting for device to boot
> [ 5.124471] Bluetooth: btintel_boot_wait() hci0: Device booted in 15506 usecs
> [ 5.124506] Bluetooth: msft_skb_pull() hci0: Malformed MSFT vendor event: 0x02
> [ 5.124924] Bluetooth: btintel_load_ddc_config() hci0: Found Intel DDC parameters: intel/ibt-0040-0041.ddc
> [ 5.127569] Bluetooth: btintel_load_ddc_config() hci0: Applying Intel DDC parameters completed
> [ 5.130620] Bluetooth: btintel_version_info_tlv() hci0: Firmware timestamp 2023.4 buildtype 1 build 58403
> [ 5.130823] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 5.132052] r8152 4-1.4:1.0 eth0: carrier on
> [ 5.201969] Bluetooth: mgmt_init_hdev() MGMT ver 1.22
> [ 5.328877] 8021q: 802.1Q VLAN Support v1.8
> [ 5.364638] NET: Registered PF_ALG protocol family
> [ 5.498693] pci 0000:00:05.0: attach allowed to drvr intel-ipu6 [internal device]
> [ 5.506000] intel-ipu6 intel-ipu: Device 0xa75d (rev: 0x1)
> [ 5.506209] intel-ipu6 intel-ipu: physical base address 0x82000000
> [ 5.506229] intel-ipu6 intel-ipu: mapped as: 0x00000000057757e2
> [ 5.509912] intel-ipu6 intel-ipu: IPU in secure mode
> [ 5.509949] intel-ipu6 intel-ipu: IPU secure touch = 0x0
> [ 5.509964] intel-ipu6 intel-ipu: IPU camera mask = 0xff
> [ 5.524724] intel-ipu6 intel-ipu: IPC reset done
> [ 5.524791] intel-ipu6 intel-ipu: cpd file name: intel/ipu6ep_fw.bin
> [ 5.533502] intel-ipu6 intel-ipu: FW version: 20220510
> [ 5.569324] intel-ipu6 intel-ipu: Sending BOOT_LOAD to CSE
> [ 5.579638] intel-ipu6 intel-ipu: Sending AUTHENTICATE_RUN to CSE
> [ 5.598044] acpi 10EC5682:00: GPIO: looking up 0 in _CRS
> [ 5.598881] acpi PRP0001:00: GPIO: looking up 0 in _CRS
> [ 5.601579] gpio gpiochip0: Persistence not supported for GPIO 87
> [ 5.626794] rt5682 i2c-10EC5682:00: Using default DAI clk names: rt5682-dai-wclk, rt5682-dai-bclk
> [ 5.628378] acpi PRP0001:01: GPIO: looking up 0 in _CRS
> [ 5.628427] rt5682 i2c-10EC5682:00: supply AVDD not found, using dummy regulator
> [ 5.630330] dw9714 i2c-PRP0001:00: supply vcc not found, using dummy regulator
> [ 5.630383] at24 i2c-PRP0001:01: supply vcc not found, using dummy regulator
> [ 5.639255] rt5682 i2c-10EC5682:00: supply MICVDD not found, using dummy regulator
> [ 5.652413] intel-ipu6 intel-ipu: CSE authenticate_run done
> [ 5.653284] intel-ipu6 intel-ipu: IPU6-v3 driver version 1.0
> [ 5.677987] rt5682 i2c-10EC5682:00: supply VBAT not found, using dummy regulator
> [ 5.678541] at24 i2c-PRP0001:01: GPIO lookup for consumer wp
> [ 5.678571] at24 i2c-PRP0001:01: using ACPI for GPIO lookup
> [ 5.678586] acpi PRP0001:01: GPIO: looking up wp-gpios
> [ 5.678597] acpi PRP0001:01: GPIO: looking up wp-gpio
> [ 5.678607] at24 i2c-PRP0001:01: using lookup tables for GPIO lookup
> [ 5.678619] at24 i2c-PRP0001:01: No GPIO consumer wp found
> [ 5.678778] max98357a MX98360A:00: GPIO lookup for consumer sdmode
> [ 5.678787] max98357a MX98360A:00: using ACPI for GPIO lookup
> [ 5.678793] acpi MX98360A:00: GPIO: looking up sdmode-gpios
> [ 5.678802] acpi MX98360A:00: GPIO: looking up sdmode-gpio
> [ 5.678811] acpi MX98360A:00: GPIO: _DSD returned MX98360A:00 0 0 0
> [ 5.679070] gpio gpiochip0: Persistence not supported for GPIO 75
> [ 5.679834] rt5682 i2c-10EC5682:00: supply DBVDD not found, using dummy regulator
> [ 5.681314] rt5682 i2c-10EC5682:00: supply LDO1-IN not found, using dummy regulator
> [ 5.712993] at24 i2c-PRP0001:01: 8192 byte 24c08 EEPROM, read-only
> [ 5.715445] acpi INT3478:00: GPIO: looking up 0 in _CRS
> [ 6.007663] acpi OVTI8856:00: GPIO: looking up 0 in _CRS
> [ 6.010737] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops 0xffffffff862f8f70)
> [ 6.021154] udevd[2824]: Process '/bin/chgrp arc-camera /sys//devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-PRP0001:00/eeprom' failed with exit code 1.
> [ 6.036452] udevd[2824]: Process '/bin/chmod 440 /sys//devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-PRP0001:00/eeprom' failed with exit code 1.
> [ 6.043045] ov8856 i2c-OVTI8856:00: OV8856 revision 1 (2A) at address 0x36
> [ 6.054010] sx9324 i2c-STH9324:00: supply vdd not found, using dummy regulator
> [ 6.061095] sx9324 i2c-STH9324:01: supply vdd not found, using dummy regulator
> [ 6.063796] sx9324 i2c-STH9324:00: supply svdd not found, using dummy regulator
> [ 6.069732] sx9324 i2c-STH9324:01: supply svdd not found, using dummy regulator
> [ 6.523475] typec port0: bound usb3-port1 (ops 0xffffffff865825d8)
> [ 6.526927] typec port0: bound usb2-port1 (ops 0xffffffff865825d8)
> [ 6.529843] typec port0: bound usb4_port1 (ops 0xffffffff865b6870)
> [ 6.542035] Bluetooth: rfcomm_init_sockets() RFCOMM socket layer initialized
> [ 6.542251] Bluetooth: rfcomm_init() RFCOMM ver 1.11
> [ 6.545031] Bluetooth: set_offload_codec_func() hci0: offload codecs enable 1 changed 1
> [ 6.545916] typec port1: bound usb3-port2 (ops 0xffffffff865825d8)
> [ 6.548921] typec port1: bound usb2-port2 (ops 0xffffffff865825d8)
> [ 6.585787] typec port2: bound usb3-port3 (ops 0xffffffff865825d8)
> [ 6.585872] typec port2: bound usb2-port3 (ops 0xffffffff865825d8)
> [ 6.585911] typec port2: bound usb4_port1 (ops 0xffffffff865b6870)
> [ 6.743454] intel-ipu6-isys intel-ipu6-isys0: bind ov8856 14-0036 nlanes is 4 port is 2
> [ 7.018295] pci 0000:00:1f.3: attach allowed to drvr sof-audio-pci-intel-tgl [internal device]
> [ 7.020021] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
> [ 7.023368] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffff862f2260)
> [ 7.039994] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode
> [ 7.097247] intel-ipu6-isys intel-ipu6-isys0: bind imx208 16-0010 nlanes is 2 port is 1
> [ 7.110440] intel-ipu6-isys intel-ipu6-isys0: All sensor registration completed.
> [ 7.169643] intel-ipu6-psys intel-ipu6-psys0: pkg_dir entry count:8
> [ 7.173383] intel-ipu6-psys intel-ipu6-psys0: psys probe minor: 0
> [ 7.184395] sof-audio-pci-intel-tgl 0000:00:1f.3: NHLT table not found
> [ 7.184441] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 4
> [ 7.184458] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
> [ 7.184485] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 0
> [ 7.187742] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-a337f
> [ 7.187778] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:23:0 Kernel ABI 3:23:0
> [ 7.187895] sof-audio-pci-intel-tgl 0000:00:1f.3: unknown sof_ext_man header type 3 size 0x30
> [ 7.327787] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-a337f
> [ 7.327833] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:23:0 Kernel ABI 3:23:0
> [ 8.205334] udevd[2845]: Process '/usr/sbin/mems_setup --device_id=1' failed with exit code 1.
> [ 8.213133] udevd[2804]: Process '/usr/sbin/mems_setup --device_id=5' failed with exit code 1.
> [ 8.529020] init: cdm-oemcrypto main process ended, respawning
> [ 8.671554] IPv6: ADDRCONF(NETDEV_CHANGE): arc_ns0: link becomes ready
> [ 8.671882] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
> [ 9.341796] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
> [ 10.365707] loop2: detected capacity change from 0 to 18888
> [ 10.405042] loop3: detected capacity change from 0 to 39688
> [ 11.037489] input: cros_fp_input as /devices/virtual/input/input12
> [ 11.206703] usb 3-1: USB disconnect, device number 2
> [ 11.373628] init: cdm-oemcrypto main process ended, respawning
> [ 13.717775] thunderbolt 0-0:1.1: GPIO lookup for consumer wp
> [ 13.717803] thunderbolt 0-0:1.1: using lookup tables for GPIO lookup
> [ 13.717816] thunderbolt 0-0:1.1: No GPIO consumer wp found
> [ 13.718003] thunderbolt 0-0:1.1: GPIO lookup for consumer wp
> [ 13.718013] thunderbolt 0-0:1.1: using lookup tables for GPIO lookup
> [ 13.718022] thunderbolt 0-0:1.1: No GPIO consumer wp found
> [ 13.718156] thunderbolt 0-0:1.1: new retimer found, vendor=0x8087 device=0x15ee
> [ 13.719595] udevd[5008]: Process '/bin/chown -R fwupd:fwupd /sys//devices/pci0000:00/0000:00:0d.2/domain0/0-0/usb4_port1/0-0:1.1' failed with exit code 1.
> [ 13.727382] udevd[5008]: Process '/bin/chown power:power "/sys//devices/pci0000:00/0000:00:0d.2/domain0/0-0/usb4_port1/0-0:1.1/power/control"' failed with exit code 1.
> [ 14.066734] init: cdm-oemcrypto main process ended, respawning
> [ 14.797125] thunderbolt 0-1: new device found, vendor=0x175 device=0x4000
> [ 14.797165] thunderbolt 0-1: SAMSUNG ELECTRONICS CO., LTD Portable SSD X5
> [ 14.801243] thunderbolt 0-1: GPIO lookup for consumer wp
> [ 14.801272] thunderbolt 0-1: using lookup tables for GPIO lookup
> [ 14.801282] thunderbolt 0-1: No GPIO consumer wp found
> [ 14.801478] thunderbolt 0-1: GPIO lookup for consumer wp
> [ 14.801489] thunderbolt 0-1: using lookup tables for GPIO lookup
> [ 14.801495] thunderbolt 0-1: No GPIO consumer wp found
> [ 16.677992] init: cdm-oemcrypto main process ended, respawning
> [ 19.236934] init: cdm-oemcrypto main process ended, respawning
> [ 21.832583] init: cdm-oemcrypto respawning too fast, stopped
> [ 41.837528] init: vm_cicerone state changed from spawning to spawned
> [ 41.838023] init: vm_cicerone main process (7063) executable changed
> [ 41.840760] init: vm_cicerone main process (7063) became new process (7064)
> [ 41.840771] init: vm_cicerone state changed from spawned to post-starting
> [ 41.840806] init: vm_cicerone state changed from post-starting to post-start
> [ 41.840824] init: vm_cicerone state changed from post-start to running
> [ 41.840928] init: Handling started event
> [ 41.849751] init: Handling load-shill-profile event
> [ 41.849848] init: shill-start-user-session goal changed from stop to start
> [ 41.849863] init: shill-start-user-session state changed from waiting to starting
> [ 41.849944] init: Handling starting event
> [ 41.850016] init: shill-start-user-session state changed from starting to security-spawning
> [ 41.850027] init: shill-start-user-session state changed from security-spawning to security
> [ 41.850035] init: shill-start-user-session state changed from security to tmpfiles-spawning
> [ 41.850043] init: shill-start-user-session state changed from tmpfiles-spawning to tmpfiles
> [ 41.850051] init: shill-start-user-session state changed from tmpfiles to pre-starting
> [ 41.850058] init: shill-start-user-session state changed from pre-starting to pre-start
> [ 41.850066] init: shill-start-user-session state changed from pre-start to spawning
> [ 41.850197] init: shill-start-user-session main process (7083)
> [ 41.850220] init: shill-start-user-session state changed from spawning to spawned
> [ 41.850454] init: shill-start-user-session state changed from spawned to post-starting
> [ 41.850474] init: shill-start-user-session state changed from post-starting to post-start
> [ 41.850486] init: shill-start-user-session state changed from post-start to running
> [ 41.850509] init: Handling started event
> [ 41.862793] init: shill-start-user-session main process (7083) exited normally
> [ 41.862818] init: shill-start-user-session goal changed from start to stop
> [ 41.862859] init: shill-start-user-session state changed from running to stopping
> [ 41.862888] init: Handling stopping event
> [ 41.863075] init: shill-start-user-session state changed from stopping to killed
> [ 41.863096] init: shill-start-user-session state changed from killed to post-stopping
> [ 41.863113] init: shill-start-user-session state changed from post-stopping to post-stop
> [ 41.863131] init: shill-start-user-session state changed from post-stop to waiting
> [ 41.863245] init: Handling stopped event
> [ 41.885182] init: smbproviderd post-start process (7021) exited normally
> [ 41.885215] init: smbproviderd state changed from post-start to running
> [ 41.885277] init: Handling started event
> [ 41.998200] init: Connection from private client
> [ 41.999678] init: usb_bouncer pre-start process (6947) exited normally
> [ 41.999704] init: usb_bouncer state changed from pre-start to spawning
> [ 41.999855] init: usb_bouncer main process (7213)
> [ 41.999897] init: usb_bouncer state changed from spawning to spawned
> [ 42.000890] init: usb_bouncer state changed from spawned to post-starting
> [ 42.000925] init: usb_bouncer state changed from post-starting to post-start
> [ 42.001011] init: usb_bouncer state changed from post-start to running
> [ 42.001048] init: Handling started event
> [ 42.020401] init: usb_bouncer main process (7213) exited normally
> [ 42.020422] init: usb_bouncer goal changed from start to stop
> [ 42.020445] init: usb_bouncer state changed from running to stopping
> [ 42.020473] init: Handling stopping event
> [ 42.020651] init: usb_bouncer state changed from stopping to killed
> [ 42.020669] init: usb_bouncer state changed from killed to post-stopping
> [ 42.020679] init: usb_bouncer state changed from post-stopping to post-stop
> [ 42.020689] init: usb_bouncer state changed from post-stop to waiting
> [ 42.020753] init: Handling stopped event
> [ 42.037620] init: lacros-unmounter goal changed from stop to start
> [ 42.037659] init: lacros-unmounter state changed from waiting to starting
> [ 42.037697] init: Handling starting event
> [ 42.037993] init: lacros-unmounter state changed from starting to security-spawning
> [ 42.038019] init: lacros-unmounter state changed from security-spawning to security
> [ 42.038039] init: lacros-unmounter state changed from security to tmpfiles-spawning
> [ 42.038064] init: lacros-unmounter state changed from tmpfiles-spawning to tmpfiles
> [ 42.038089] init: lacros-unmounter state changed from tmpfiles to pre-starting
> [ 42.038109] init: lacros-unmounter state changed from pre-starting to pre-start
> [ 42.038128] init: lacros-unmounter state changed from pre-start to spawning
> [ 42.038398] init: lacros-unmounter main process (7235)
> [ 42.038490] init: lacros-unmounter state changed from spawning to spawned
> [ 42.038989] init: lacros-unmounter state changed from spawned to post-starting
> [ 42.039021] init: lacros-unmounter state changed from post-starting to post-start
> [ 42.039039] init: lacros-unmounter state changed from post-start to running
> [ 42.039079] init: Handling started event
> [ 42.039695] init: lacros-unmounter main process (7235) exited normally
> [ 42.039711] init: lacros-unmounter goal changed from start to stop
> [ 42.039728] init: lacros-unmounter state changed from running to stopping
> [ 42.039743] init: Handling stopping event
> [ 42.039842] init: lacros-unmounter state changed from stopping to killed
> [ 42.039852] init: lacros-unmounter state changed from killed to post-stopping
> [ 42.039859] init: lacros-unmounter state changed from post-stopping to post-stop
> [ 42.039865] init: lacros-unmounter state changed from post-stop to waiting
> [ 42.039922] init: Handling stopped event
> [ 42.522253] pcieport 0000:00:07.0: pciehp: Slot(3): Card present
> [ 42.635697] init: Connection from private client
> [ 42.646941] pci 0000:01:00.0: [8086:15da] type 01 class 0x060400
> [ 42.647006] pci 0000:01:00.0: enabling Extended Tags
> [ 42.647145] pci 0000:01:00.0: supports D1 D2
> [ 42.647147] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 42.647250] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:07.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
> [ 42.647551] pci 0000:01:00.0: Adding to iommu group 21
> [ 42.649913] pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
> [ 42.650029] pci 0000:02:01.0: [8086:15da] type 01 class 0x060400
> [ 42.650101] pci 0000:02:01.0: enabling Extended Tags
> [ 42.650233] pci 0000:02:01.0: supports D1 D2
> [ 42.650235] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 42.650403] pci 0000:02:01.0: Adding to iommu group 22
> [ 42.650512] pci 0000:01:00.0: PCI bridge to [bus 02-2b]
> [ 42.650521] pci 0000:01:00.0: bridge window [io 0x0000-0x0fff]
> [ 42.650526] pci 0000:01:00.0: bridge window [mem 0x00000000-0x000fffff]
> [ 42.650534] pci 0000:01:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
> [ 42.650538] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
> [ 42.650636] pci 0000:03:00.0: [144d:a808] type 00 class 0x010802
> [ 42.650671] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
> [ 42.651002] pci 0000:03:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x4 link at 0000:00:07.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
> [ 42.651119] pci 0000:03:00.0: Adding to iommu group 22
> [ 42.653906] pci 0000:02:01.0: PCI bridge to [bus 03-2b]
> [ 42.653925] pci 0000:02:01.0: bridge window [io 0x0000-0x0fff]
> [ 42.653934] pci 0000:02:01.0: bridge window [mem 0x00000000-0x000fffff]
> [ 42.653945] pci 0000:02:01.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
> [ 42.653950] pci_bus 0000:03: busn_res: [bus 03-2b] end is updated to 2b
> [ 42.653959] pci_bus 0000:02: busn_res: [bus 02-2b] end is updated to 2b
> [ 42.653969] pci 0000:02:01.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 03-2b] add_size 100000 add_align 100000
> [ 42.653975] pci 0000:02:01.0: bridge window [mem 0x00100000-0x001fffff] to [bus 03-2b] add_size 100000 add_align 100000
> [ 42.653981] pci 0000:01:00.0: bridge window [mem 0x00100000-0x001fffff 64bit pref] to [bus 02-2b] add_size 100000 add_align 100000
> [ 42.653985] pci 0000:01:00.0: bridge window [mem 0x00100000-0x001fffff] to [bus 02-2b] add_size 100000 add_align 100000
> [ 42.653995] pci 0000:01:00.0: BAR 14: assigned [mem 0x83000000-0x8f1fffff]
> [ 42.653999] pci 0000:01:00.0: BAR 15: assigned [mem 0x87fc00000-0x89bbfffff 64bit pref]
> [ 42.654003] pci 0000:01:00.0: BAR 13: assigned [io 0x2000-0x3fff]
> [ 42.654008] pci 0000:02:01.0: BAR 14: assigned [mem 0x83000000-0x8f1fffff]
> [ 42.654012] pci 0000:02:01.0: BAR 15: assigned [mem 0x87fc00000-0x89bbfffff 64bit pref]
> [ 42.654016] pci 0000:02:01.0: BAR 13: assigned [io 0x2000-0x3fff]
> [ 42.654021] pci 0000:03:00.0: BAR 0: assigned [mem 0x83000000-0x83003fff 64bit]
> [ 42.654042] pci 0000:02:01.0: PCI bridge to [bus 03-2b]
> [ 42.654047] pci 0000:02:01.0: bridge window [io 0x2000-0x3fff]
> [ 42.654055] pci 0000:02:01.0: bridge window [mem 0x83000000-0x8f1fffff]
> [ 42.654062] pci 0000:02:01.0: bridge window [mem 0x87fc00000-0x89bbfffff 64bit pref]
> [ 42.654073] pci 0000:01:00.0: PCI bridge to [bus 02-2b]
> [ 42.654077] pci 0000:01:00.0: bridge window [io 0x2000-0x3fff]
> [ 42.654086] pci 0000:01:00.0: bridge window [mem 0x83000000-0x8f1fffff]
> [ 42.654092] pci 0000:01:00.0: bridge window [mem 0x87fc00000-0x89bbfffff 64bit pref]
> [ 42.654103] pcieport 0000:00:07.0: PCI bridge to [bus 01-2b]
> [ 42.654107] pcieport 0000:00:07.0: bridge window [io 0x2000-0x3fff]
> [ 42.654112] pcieport 0000:00:07.0: bridge window [mem 0x83000000-0x8f1fffff]
> [ 42.654116] pcieport 0000:00:07.0: bridge window [mem 0x87fc00000-0x89bbfffff 64bit pref]
> [ 42.654139] pci 0000:01:00.0: attach allowed to drvr pcieport [drvr in allowlist]
> [ 42.654186] pcieport 0000:01:00.0: enabling device (0000 -> 0003)
> [ 42.654757] pci 0000:02:01.0: attach allowed to drvr pcieport [drvr in allowlist]
> [ 42.654785] pcieport 0000:02:01.0: enabling device (0000 -> 0003)
> [ 42.655201] pcieport 0000:02:01.0: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
> [ 42.655514] pci 0000:03:00.0: attach allowed to drvr nvme [drvr in allowlist]
> [ 42.655871] nvme nvme1: pci function 0000:03:00.0
> [ 42.655894] nvme 0000:03:00.0: enabling device (0000 -> 0002)
> *[ 42.656498] nvme nvme1: Removing after probe failure status: -19*
> [ 42.682099] pcieport 0000:00:1c.0: AER: Multiple Corrected error received: 0000:82:00.0
> [ 42.685595] sdhci-pci 0000:82:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
> [ 42.685599] sdhci-pci 0000:82:00.0: device [17a0:9755] error status/mask=00001000/00002000
> [ 42.685602] sdhci-pci 0000:82:00.0: [12] Timeout
> [ 42.689393] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0
> [ 42.689402] pcieport 0000:00:1c.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
> [ 42.689405] pcieport 0000:00:1c.0: device [8086:51bf] error status/mask=00001000/00002000
> [ 42.689408] pcieport 0000:00:1c.0: [12] Timeout
> [ 42.689430] pcieport 0000:00:1c.0: AER: Corrected error received: 0000:82:00.0
> [ 42.692891] sdhci-pci 0000:82:00.0: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
> [ 42.692893] sdhci-pci 0000:82:00.0: device [17a0:9755] error status/mask=00001000/00002000
> [ 42.692896] sdhci-pci 0000:82:00.0: [12] Timeout
> [ 43.200070] init: cdm-oemcrypto main process (6928) exited normally
> [ 43.200091] init: cdm-oemcrypto main process ended, respawning
> [ 43.200166] init: cdm-oemcrypto state changed from running to stopping
>
> The issue is specific to this particular device.
>
> Please let me know if you require more information (more logs enabled, etc.).
>
> Thanks
> Rajat
next parent reply other threads:[~2023-03-09 14:10 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <f1ad4c1a-2871-57be-48cb-2b0e5cec1bfa@linux.intel.com>
2023-03-09 14:04 ` Rajat Khandelwal [this message]
2023-03-27 22:37 ` [BUG] nvme-pci: NVMe probe fails with ENODEV Bjorn Helgaas
2023-03-09 15:12 ` Christoph Hellwig
2023-03-09 15:24 ` Keith Busch
2023-03-09 17:06 ` Rajat Khandelwal
2023-03-09 17:24 ` Keith Busch
2023-03-09 18:13 ` Rajat Khandelwal
[not found] ` <CGME20230313095802eucas1p2ed9a708d3fb0fb1fac05015a6fb06b7f@eucas1p2.samsung.com>
2023-03-13 9:49 ` Pankaj Raghav
2023-03-13 17:16 ` Rajat Khandelwal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=975cc790-7dd9-4902-45c1-c69b4be9ba3a@linux.intel.com \
--to=rajat.khandelwal@linux.intel.com \
--cc=axboe@fb.com \
--cc=hch@lst.de \
--cc=kbusch@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=rajat.khandelwal@intel.com \
--cc=sagi@grimberg.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.