All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zhao Yakui <yakui.zhao@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH V3 1/6] drm/i915: Split the BDW device definition to prepare for dual BSD rings on BDW GT3
Date: Mon, 15 Jan 2001 02:37:38 +0800	[thread overview]
Message-ID: <979497463-1661-2-git-send-email-yakui.zhao@intel.com> (raw)
In-Reply-To: <979497463-1661-1-git-send-email-yakui.zhao@intel.com>

Based on the hardware spec, the BDW GT3 has the different configuration
with the BDW GT1/GT2. So split the BDW device info definition.
This is to do the preparation for adding the Dual BSD rings on BDW GT3 machine.

V1->V2: Follow Daniel's comment to pay attention to the stolen check for BDW
in kernel/early-quirks.c

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.c |   26 ++++++++++++++++++++++++--
 include/drm/i915_pciids.h       |   22 +++++++++++++++++-----
 2 files changed, 41 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 5d8250f..17fbbe5 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -279,6 +279,26 @@ static const struct intel_device_info intel_broadwell_m_info = {
 	GEN_DEFAULT_PIPEOFFSETS,
 };
 
+static const struct intel_device_info intel_broadwell_gt3d_info = {
+	.gen = 8, .num_pipes = 3,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
+	.has_llc = 1,
+	.has_ddi = 1,
+	.has_fbc = 1,
+	GEN_DEFAULT_PIPEOFFSETS,
+};
+
+static const struct intel_device_info intel_broadwell_gt3m_info = {
+	.gen = 8, .is_mobile = 1, .num_pipes = 3,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
+	.has_llc = 1,
+	.has_ddi = 1,
+	.has_fbc = 1,
+	GEN_DEFAULT_PIPEOFFSETS,
+};
+
 /*
  * Make sure any device matches here are from most specific to most
  * general.  For example, since the Quanta match is based on the subsystem
@@ -311,8 +331,10 @@ static const struct intel_device_info intel_broadwell_m_info = {
 	INTEL_HSW_M_IDS(&intel_haswell_m_info), \
 	INTEL_VLV_M_IDS(&intel_valleyview_m_info),	\
 	INTEL_VLV_D_IDS(&intel_valleyview_d_info),	\
-	INTEL_BDW_M_IDS(&intel_broadwell_m_info),	\
-	INTEL_BDW_D_IDS(&intel_broadwell_d_info)
+	INTEL_BDW_GT12M_IDS(&intel_broadwell_m_info),	\
+	INTEL_BDW_GT12D_IDS(&intel_broadwell_d_info),	\
+	INTEL_BDW_GT3M_IDS(&intel_broadwell_gt3m_info),	\
+	INTEL_BDW_GT3D_IDS(&intel_broadwell_gt3d_info)
 
 static const struct pci_device_id pciidlist[] = {		/* aka */
 	INTEL_PCI_IDS,
diff --git a/include/drm/i915_pciids.h b/include/drm/i915_pciids.h
index 940ece4..24f3cad 100644
--- a/include/drm/i915_pciids.h
+++ b/include/drm/i915_pciids.h
@@ -223,14 +223,26 @@
 	_INTEL_BDW_D(gt, 0x160A, info), /* Server */ \
 	_INTEL_BDW_D(gt, 0x160D, info) /* Workstation */
 
-#define INTEL_BDW_M_IDS(info) \
+#define INTEL_BDW_GT12M_IDS(info) \
 	_INTEL_BDW_M_IDS(1, info), \
-	_INTEL_BDW_M_IDS(2, info), \
-	_INTEL_BDW_M_IDS(3, info)
+	_INTEL_BDW_M_IDS(2, info)
 
-#define INTEL_BDW_D_IDS(info) \
+#define INTEL_BDW_GT12D_IDS(info) \
 	_INTEL_BDW_D_IDS(1, info), \
-	_INTEL_BDW_D_IDS(2, info), \
+	_INTEL_BDW_D_IDS(2, info)
+
+#define INTEL_BDW_GT3M_IDS(info) \
+	_INTEL_BDW_M_IDS(3, info)
+
+#define INTEL_BDW_GT3D_IDS(info) \
 	_INTEL_BDW_D_IDS(3, info)
 
+#define INTEL_BDW_M_IDS(info) \
+	INTEL_BDW_GT12M_IDS(info), \
+	INTEL_BDW_GT3M_IDS(info)
+
+#define INTEL_BDW_D_IDS(info) \
+	INTEL_BDW_GT12D_IDS(info), \
+	INTEL_BDW_GT3D_IDS(info)
+
 #endif /* _I915_PCIIDS_H */
-- 
1.7.10.1

  reply	other threads:[~2014-04-16  1:45 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-01-14 18:37 [PATCH V3 0/6] drm/i915: Add the support of dual BSD rings on BDW GT3 Zhao Yakui
2001-01-14 18:37 ` Zhao Yakui [this message]
2001-01-14 18:37 ` [PATCH V3 2/6] drm/i915:Initialize the second BSD ring on BDW GT3 machine Zhao Yakui
2001-01-14 18:37 ` [PATCH V3 3/6] drm/i915:Handle the irq interrupt for the second BSD ring Zhao Yakui
2001-01-14 18:37 ` [PATCH V3 4/6] drm/i915:Add the VCS2 switch in Intel_ring_setup_status_page for Gen7 to remove the switch check warning Zhao Yakui
2001-01-14 18:37 ` [PATCH V3 5/6] drm/i915: Update the restrict check to filter out wrong Ring ID passed by user-space Zhao Yakui
2001-01-14 18:37 ` [PATCH V3 6/6] drm/i915: Use the coarse ping-pong mechanism based on drm fd to dispatch the BSD command on BDW GT3 Zhao Yakui
2014-04-16  2:41 [PATCH V3 0/6] drm/i915: Add the support of dual BSD rings " Zhao Yakui
2014-04-16  2:41 ` [PATCH V3 1/6] drm/i915: Split the BDW device definition to prepare for " Zhao Yakui
2014-04-16 14:14   ` Imre Deak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=979497463-1661-2-git-send-email-yakui.zhao@intel.com \
    --to=yakui.zhao@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.