From: Jonathan Bakker <xc-racer2@live.ca>
To: krzk@kernel.org, alim.akhtar@samsung.com
Cc: robh+dt@kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Jonathan Bakker <xc-racer2@live.ca>
Subject: [PATCH 5/7] ARM: dts: s5pv210: Correct interrupt name for bluetooth in Aries
Date: Wed, 23 Mar 2022 08:03:09 -0700 [thread overview]
Message-ID: <CY4PR04MB0567DC7336ECABC67A1EC78ECB189@CY4PR04MB0567.namprd04.prod.outlook.com> (raw)
In-Reply-To: <20220323150311.26699-1-xc-racer2@live.ca>
Correct the name of the bluetooth interrupt from host-wake to
host-wakeup.
Fixes: 1c65b6184441b
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
---
arch/arm/boot/dts/s5pv210-aries.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index b5d625f12132..13a065f5df5e 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -902,7 +902,7 @@
device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
interrupt-parent = <&gph2>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
+ interrupt-names = "host-wakeup";
};
};
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Bakker <xc-racer2@live.ca>
To: krzk@kernel.org, alim.akhtar@samsung.com
Cc: robh+dt@kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Jonathan Bakker <xc-racer2@live.ca>
Subject: [PATCH 5/7] ARM: dts: s5pv210: Correct interrupt name for bluetooth in Aries
Date: Wed, 23 Mar 2022 08:03:09 -0700 [thread overview]
Message-ID: <CY4PR04MB0567DC7336ECABC67A1EC78ECB189@CY4PR04MB0567.namprd04.prod.outlook.com> (raw)
In-Reply-To: <20220323150311.26699-1-xc-racer2@live.ca>
Correct the name of the bluetooth interrupt from host-wake to
host-wakeup.
Fixes: 1c65b6184441b
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
---
arch/arm/boot/dts/s5pv210-aries.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index b5d625f12132..13a065f5df5e 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -902,7 +902,7 @@
device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
interrupt-parent = <&gph2>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
+ interrupt-names = "host-wakeup";
};
};
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-03-23 15:03 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20220322201144.20320-1-xc-racer2@live.ca>
2022-03-22 20:11 ` [PATCH 1/7] ARM: dts: s5pv210: Split memory nodes to match spec Jonathan Bakker
2022-03-22 20:11 ` Jonathan Bakker
2022-03-23 10:54 ` Krzysztof Kozlowski
2022-03-23 10:54 ` Krzysztof Kozlowski
2022-03-23 14:59 ` Jonathan Bakker
2022-03-23 14:59 ` Jonathan Bakker
2022-03-23 15:06 ` Krzysztof Kozlowski
2022-03-23 15:06 ` Krzysztof Kozlowski
2022-03-23 17:05 ` Jonathan Bakker
2022-03-23 17:05 ` Jonathan Bakker
2022-03-24 11:23 ` Krzysztof Kozlowski
2022-03-24 11:23 ` Krzysztof Kozlowski
2022-03-23 15:03 ` [PATCH 2/7] ARM: dts: s5pv210: Adjust I2S entries " Jonathan Bakker
2022-03-23 15:03 ` Jonathan Bakker
2022-03-23 15:14 ` Krzysztof Kozlowski
2022-03-23 15:14 ` Krzysztof Kozlowski
2022-03-23 15:15 ` Krzysztof Kozlowski
2022-03-23 15:15 ` Krzysztof Kozlowski
2022-03-23 17:24 ` Jonathan Bakker
2022-03-23 17:24 ` Jonathan Bakker
2022-03-24 11:49 ` Krzysztof Kozlowski
2022-03-24 11:49 ` Krzysztof Kozlowski
2023-04-21 9:44 ` Krzysztof Kozlowski
2023-04-21 9:44 ` Krzysztof Kozlowski
2023-05-03 2:33 ` Jonathan Bakker
2023-05-03 2:33 ` Jonathan Bakker
[not found] ` <20220323150311.26699-1-xc-racer2@live.ca>
2022-03-23 15:03 ` [PATCH 3/7] ARM: dts: s5pv210: Adjust DMA node names " Jonathan Bakker
2022-03-23 15:03 ` Jonathan Bakker
2022-03-23 15:03 ` [PATCH 4/7] ARM: dts: s5pv210: Remove spi-cs-high on panel in Aries Jonathan Bakker
2022-03-23 15:03 ` Jonathan Bakker
2022-03-23 15:22 ` Krzysztof Kozlowski
2022-03-23 15:22 ` Krzysztof Kozlowski
2022-03-23 15:03 ` Jonathan Bakker [this message]
2022-03-23 15:03 ` [PATCH 5/7] ARM: dts: s5pv210: Correct interrupt name for bluetooth " Jonathan Bakker
2022-03-23 15:23 ` krzk
2022-03-23 15:23 ` krzk
2022-03-23 15:03 ` [PATCH 6/7] ARM: dts: s5pv210: Add charger regulator to max8998 " Jonathan Bakker
2022-03-23 15:03 ` Jonathan Bakker
2022-03-23 15:03 ` [PATCH 7/7] ARM: dts: s5pv210: Add charger support " Jonathan Bakker
2022-03-23 15:03 ` Jonathan Bakker
2022-03-23 15:31 ` krzk
2022-03-23 15:31 ` krzk
2022-03-23 17:20 ` Jonathan Bakker
2022-03-23 17:20 ` Jonathan Bakker
2022-03-24 11:47 ` Krzysztof Kozlowski
2022-03-24 11:47 ` Krzysztof Kozlowski
2022-03-25 2:23 ` Jonathan Bakker
2022-03-25 2:23 ` Jonathan Bakker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CY4PR04MB0567DC7336ECABC67A1EC78ECB189@CY4PR04MB0567.namprd04.prod.outlook.com \
--to=xc-racer2@live.ca \
--cc=alim.akhtar@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.