All of lore.kernel.org
 help / color / mirror / Atom feed
From: Cameron Williams <cang1@live.co.uk>
To: gregkh@linuxfoundation.org, jirislaby@kernel.org,
	linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org
Cc: Cameron Williams <cang1@live.co.uk>, stable@vger.kernel.org
Subject: [PATCH v4 11/11] tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
Date: Fri, 20 Oct 2023 17:03:17 +0100	[thread overview]
Message-ID: <DU0PR02MB7899D222A4AB2A4E8C57108FC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com> (raw)
In-Reply-To: <20231020160412.118550-1-cang1@live.co.uk>

Some of the later revisions of the Brainboxes PX cards are based
on the Oxford Semiconductor chipset. Due to the chip's unique setup
these cards need to be initialised.
Previously these were tested against a reference card with the same broken
baudrate on another PC, cancelling out the effect. With this patch they
work and can transfer/receive find against an FTDI-based device.

Add all of the cards which require this setup to the quirks table.
Thanks to Maciej W. Rozycki for clarification on this chip.

Fixes: ef5a03a26c87 ("tty: 8250: Add support for Brainboxes PX cards.")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
---
For stable: This patch is only applicable to 5.15 LTS and up, other LTS
kernels dont have the quirks available that this patch uses nor do they
support the cards these quirks target.

v3 - v4:
Add Fixes: and Cc: tag.

v2 - v3:
Re-submit patch series using git send-email to make threading work.

v1 - v2:
This is a resubmission series for the patch series below. That series
was lots of changes sent to lots of maintainers, this series is just for
the tty/serial/8250 subsystem.

[1] https://lore.kernel.org/all/DU0PR02MB789950E64D808DB57E9D7312C4F8A@DU0PR02MB7899.eurprd02.prod.outlook.com/
[2] https://lore.kernel.org/all/DU0PR02MB7899DE53DFC900EFB50E53F2C4F8A@DU0PR02MB7899.eurprd02.prod.outlook.com/
[3] https://lore.kernel.org/all/DU0PR02MB7899033E7E81EAF3694BC20AC4F8A@DU0PR02MB7899.eurprd02.prod.outlook.com/
[4] https://lore.kernel.org/all/DU0PR02MB7899EABA8C3DCAC94DCC79D4C4F8A@DU0PR02MB7899.eurprd02.prod.outlook.com/

 drivers/tty/serial/8250/8250_pci.c | 147 +++++++++++++++++++++++++++++
 1 file changed, 147 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index af970b372cc2..5b024df54844 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2429,6 +2429,153 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
 		.init			= pci_oxsemi_tornado_init,
 		.setup		= pci_oxsemi_tornado_setup,
 	},
+	/*
+	 * Brainboxes devices - all Oxsemi based
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4027,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4028,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4029,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4019,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4016,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4015,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x400A,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x400E,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x400C,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x400B,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x400F,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4010,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4011,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x401D,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x401E,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4013,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4017,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTASHIELD,
+		.device		= 0x4018,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_oxsemi_tornado_init,
+		.setup		= pci_oxsemi_tornado_setup,
+	},
 	{
 		.vendor         = PCI_VENDOR_ID_INTEL,
 		.device         = 0x8811,
-- 
2.42.0


      parent reply	other threads:[~2023-10-20 16:05 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <BBPatchesV4>
2023-10-20 16:03 ` [PATCH v4 00/11] tty: 8250: Brainboxes card additions/fixes Cameron Williams
     [not found] ` <20231020160412.118550-1-cang1@live.co.uk>
2023-10-20 16:03   ` [PATCH v4 01/11] tty: 8250: Fix IS-200 PCI ID comment Cameron Williams
2023-10-21 16:19     ` Greg KH
2023-10-20 16:03   ` [PATCH v4 02/11] tty: 8250: Remove UC-257 and UC-431 Cameron Williams
2023-10-20 16:03   ` [PATCH v4 03/11] tty: 8250: Add support for additional Brainboxes UC cards Cameron Williams
2023-10-20 16:03   ` [PATCH v4 04/11] tty: 8250: Add support for Brainboxes UP cards Cameron Williams
2023-10-20 16:03   ` [PATCH v4 05/11] tty: 8250: Add support for Intashield IS-100 Cameron Williams
2023-10-24  9:41     ` Ilpo Järvinen
2023-10-24  9:49       ` Greg KH
2023-10-20 16:03   ` [PATCH v4 06/11] tty: 8250: Fix port count of PX-257 Cameron Williams
2023-10-24  9:42     ` Ilpo Järvinen
2023-10-24  9:50       ` Greg Kroah-Hartman
2023-10-24 10:18         ` Cameron Williams
2023-10-20 16:03   ` [PATCH v4 07/11] tty: 8250: Fix up PX-803/PX-857 Cameron Williams
2023-10-20 16:03   ` [PATCH v4 08/11] tty: 8250: Add note for PX-835 Cameron Williams
2023-10-20 16:03   ` [PATCH v4 09/11] tty: 8250: Add support for additional Brainboxes PX cards Cameron Williams
2023-10-20 16:03   ` [PATCH v4 10/11] tty: 8250: Add support for Intashield IX cards Cameron Williams
2023-10-20 16:03   ` Cameron Williams [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DU0PR02MB7899D222A4AB2A4E8C57108FC4DBA@DU0PR02MB7899.eurprd02.prod.outlook.com \
    --to=cang1@live.co.uk \
    --cc=gregkh@linuxfoundation.org \
    --cc=jirislaby@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.