From: Mark Brown <broonie@kernel.org>
To: John Crispin <john@phrozen.org>
Cc: devicetree@vger.kernel.org, Rob Herring <robh@kernel.org>,
Mark Brown <broonie@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: Applied "regulator: Add document for MT6323 regulator" to the regulator tree
Date: Mon, 18 Jul 2016 13:46:45 +0100 [thread overview]
Message-ID: <E1bP7wb-0001p5-BP@debutante> (raw)
In-Reply-To: <1468845651-64011-1-git-send-email-john@phrozen.org>
The patch
regulator: Add document for MT6323 regulator
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From d236b3ee5bb13f53ed60ccc6f704a13b923d2952 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Mon, 18 Jul 2016 14:40:50 +0200
Subject: [PATCH] regulator: Add document for MT6323 regulator
Signed-off-by: John Crispin <john@phrozen.org>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../bindings/regulator/mt6323-regulator.txt | 237 +++++++++++++++++++++
1 file changed, 237 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
new file mode 100644
index 000000000000..c35d878b0960
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
@@ -0,0 +1,237 @@
+Mediatek MT6323 Regulator Driver
+
+All voltage regulators are defined as subnodes of the regulators node. A list
+of regulators provided by this controller are defined as subnodes of the
+PMIC's node. Each regulator is named according to its regulator type,
+buck_<name> and ldo_<name>. The definition for each of these nodes is defined
+using the standard binding for regulators at
+Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are::
+BUCK:
+ buck_vproc, buck_vsys, buck_vpa
+LDO:
+ ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama,
+ ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2,
+ ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr,
+ ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio
+
+Example:
+
+ pmic: mt6323 {
+ mt6323regulator: regulators {
+ mt6323_vproc_reg: buck_vproc{
+ regulator-name = "vproc";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vsys_reg: buck_vsys{
+ regulator-name = "vsys";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <2987500>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vpa_reg: buck_vpa{
+ regulator-name = "vpa";
+ regulator-min-microvolt = < 500000>;
+ regulator-max-microvolt = <3650000>;
+ };
+
+ mt6323_vtcxo_reg: ldo_vtcxo{
+ regulator-name = "vtcxo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <90>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcn28_reg: ldo_vcn28{
+ regulator-name = "vcn28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+ regulator-name = "vcn33_bt";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+ regulator-name = "vcn33_wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_va_reg: ldo_va{
+ regulator-name = "va";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcama_reg: ldo_vcama{
+ regulator-name = "vcama";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vio28_reg: ldo_vio28{
+ regulator-name = "vio28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vusb_reg: ldo_vusb{
+ regulator-name = "vusb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmc_reg: ldo_vmc{
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmch_reg: ldo_vmch{
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vemc3v3_reg: ldo_vemc3v3{
+ regulator-name = "vemc3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vgp1_reg: ldo_vgp1{
+ regulator-name = "vgp1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp2_reg: ldo_vgp2{
+ regulator-name = "vgp2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp3_reg: ldo_vgp3{
+ regulator-name = "vgp3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcn18_reg: ldo_vcn18{
+ regulator-name = "vcn18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim1_reg: ldo_vsim1{
+ regulator-name = "vsim1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim2_reg: ldo_vsim2{
+ regulator-name = "vsim2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vrtc_reg: ldo_vrtc{
+ regulator-name = "vrtc";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamaf_reg: ldo_vcamaf{
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vibr_reg: ldo_vibr{
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ };
+
+ mt6323_vrf18_reg: ldo_vrf18{
+ regulator-name = "vrf18";
+ regulator-min-microvolt = <1825000>;
+ regulator-max-microvolt = <1825000>;
+ regulator-enable-ramp-delay = <187>;
+ };
+
+ mt6323_vm_reg: ldo_vm{
+ regulator-name = "vm";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vio18_reg: ldo_vio18{
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamd_reg: ldo_vcamd{
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcamio_reg: ldo_vcamio{
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+ };
+ };
--
2.8.1
WARNING: multiple messages have this Message-ID (diff)
From: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Liam Girdwood
<lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>Mark Brown
<broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.orgdevicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Applied "regulator: Add document for MT6323 regulator" to the regulator tree
Date: Mon, 18 Jul 2016 13:46:45 +0100 [thread overview]
Message-ID: <E1bP7wb-0001p5-BP@debutante> (raw)
In-Reply-To: <1468845651-64011-1-git-send-email-john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
The patch
regulator: Add document for MT6323 regulator
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From d236b3ee5bb13f53ed60ccc6f704a13b923d2952 Mon Sep 17 00:00:00 2001
From: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Date: Mon, 18 Jul 2016 14:40:50 +0200
Subject: [PATCH] regulator: Add document for MT6323 regulator
Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
.../bindings/regulator/mt6323-regulator.txt | 237 +++++++++++++++++++++
1 file changed, 237 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
new file mode 100644
index 000000000000..c35d878b0960
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
@@ -0,0 +1,237 @@
+Mediatek MT6323 Regulator Driver
+
+All voltage regulators are defined as subnodes of the regulators node. A list
+of regulators provided by this controller are defined as subnodes of the
+PMIC's node. Each regulator is named according to its regulator type,
+buck_<name> and ldo_<name>. The definition for each of these nodes is defined
+using the standard binding for regulators at
+Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are::
+BUCK:
+ buck_vproc, buck_vsys, buck_vpa
+LDO:
+ ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama,
+ ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2,
+ ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr,
+ ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio
+
+Example:
+
+ pmic: mt6323 {
+ mt6323regulator: regulators {
+ mt6323_vproc_reg: buck_vproc{
+ regulator-name = "vproc";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vsys_reg: buck_vsys{
+ regulator-name = "vsys";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <2987500>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vpa_reg: buck_vpa{
+ regulator-name = "vpa";
+ regulator-min-microvolt = < 500000>;
+ regulator-max-microvolt = <3650000>;
+ };
+
+ mt6323_vtcxo_reg: ldo_vtcxo{
+ regulator-name = "vtcxo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <90>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcn28_reg: ldo_vcn28{
+ regulator-name = "vcn28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+ regulator-name = "vcn33_bt";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+ regulator-name = "vcn33_wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_va_reg: ldo_va{
+ regulator-name = "va";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcama_reg: ldo_vcama{
+ regulator-name = "vcama";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vio28_reg: ldo_vio28{
+ regulator-name = "vio28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vusb_reg: ldo_vusb{
+ regulator-name = "vusb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmc_reg: ldo_vmc{
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmch_reg: ldo_vmch{
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vemc3v3_reg: ldo_vemc3v3{
+ regulator-name = "vemc3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vgp1_reg: ldo_vgp1{
+ regulator-name = "vgp1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp2_reg: ldo_vgp2{
+ regulator-name = "vgp2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp3_reg: ldo_vgp3{
+ regulator-name = "vgp3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcn18_reg: ldo_vcn18{
+ regulator-name = "vcn18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim1_reg: ldo_vsim1{
+ regulator-name = "vsim1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim2_reg: ldo_vsim2{
+ regulator-name = "vsim2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vrtc_reg: ldo_vrtc{
+ regulator-name = "vrtc";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamaf_reg: ldo_vcamaf{
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vibr_reg: ldo_vibr{
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ };
+
+ mt6323_vrf18_reg: ldo_vrf18{
+ regulator-name = "vrf18";
+ regulator-min-microvolt = <1825000>;
+ regulator-max-microvolt = <1825000>;
+ regulator-enable-ramp-delay = <187>;
+ };
+
+ mt6323_vm_reg: ldo_vm{
+ regulator-name = "vm";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vio18_reg: ldo_vio18{
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamd_reg: ldo_vcamd{
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcamio_reg: ldo_vcamio{
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+ };
+ };
--
2.8.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: broonie@kernel.org (Mark Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: Applied "regulator: Add document for MT6323 regulator" to the regulator tree
Date: Mon, 18 Jul 2016 13:46:45 +0100 [thread overview]
Message-ID: <E1bP7wb-0001p5-BP@debutante> (raw)
In-Reply-To: <1468845651-64011-1-git-send-email-john@phrozen.org>
The patch
regulator: Add document for MT6323 regulator
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From d236b3ee5bb13f53ed60ccc6f704a13b923d2952 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Mon, 18 Jul 2016 14:40:50 +0200
Subject: [PATCH] regulator: Add document for MT6323 regulator
Signed-off-by: John Crispin <john@phrozen.org>
Cc: devicetree at vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../bindings/regulator/mt6323-regulator.txt | 237 +++++++++++++++++++++
1 file changed, 237 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
new file mode 100644
index 000000000000..c35d878b0960
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
@@ -0,0 +1,237 @@
+Mediatek MT6323 Regulator Driver
+
+All voltage regulators are defined as subnodes of the regulators node. A list
+of regulators provided by this controller are defined as subnodes of the
+PMIC's node. Each regulator is named according to its regulator type,
+buck_<name> and ldo_<name>. The definition for each of these nodes is defined
+using the standard binding for regulators at
+Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are::
+BUCK:
+ buck_vproc, buck_vsys, buck_vpa
+LDO:
+ ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama,
+ ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2,
+ ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr,
+ ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio
+
+Example:
+
+ pmic: mt6323 {
+ mt6323regulator: regulators {
+ mt6323_vproc_reg: buck_vproc{
+ regulator-name = "vproc";
+ regulator-min-microvolt = < 700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vsys_reg: buck_vsys{
+ regulator-name = "vsys";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <2987500>;
+ regulator-ramp-delay = <25000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vpa_reg: buck_vpa{
+ regulator-name = "vpa";
+ regulator-min-microvolt = < 500000>;
+ regulator-max-microvolt = <3650000>;
+ };
+
+ mt6323_vtcxo_reg: ldo_vtcxo{
+ regulator-name = "vtcxo";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <90>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcn28_reg: ldo_vcn28{
+ regulator-name = "vcn28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+ regulator-name = "vcn33_bt";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+ regulator-name = "vcn33_wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-enable-ramp-delay = <185>;
+ };
+
+ mt6323_va_reg: ldo_va{
+ regulator-name = "va";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcama_reg: ldo_vcama{
+ regulator-name = "vcama";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vio28_reg: ldo_vio28{
+ regulator-name = "vio28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vusb_reg: ldo_vusb{
+ regulator-name = "vusb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmc_reg: ldo_vmc{
+ regulator-name = "vmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vmch_reg: ldo_vmch{
+ regulator-name = "vmch";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vemc3v3_reg: ldo_vemc3v3{
+ regulator-name = "vemc3v3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ regulator-boot-on;
+ };
+
+ mt6323_vgp1_reg: ldo_vgp1{
+ regulator-name = "vgp1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp2_reg: ldo_vgp2{
+ regulator-name = "vgp2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vgp3_reg: ldo_vgp3{
+ regulator-name = "vgp3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcn18_reg: ldo_vcn18{
+ regulator-name = "vcn18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim1_reg: ldo_vsim1{
+ regulator-name = "vsim1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vsim2_reg: ldo_vsim2{
+ regulator-name = "vsim2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vrtc_reg: ldo_vrtc{
+ regulator-name = "vrtc";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamaf_reg: ldo_vcamaf{
+ regulator-name = "vcamaf";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vibr_reg: ldo_vibr{
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <36>;
+ };
+
+ mt6323_vrf18_reg: ldo_vrf18{
+ regulator-name = "vrf18";
+ regulator-min-microvolt = <1825000>;
+ regulator-max-microvolt = <1825000>;
+ regulator-enable-ramp-delay = <187>;
+ };
+
+ mt6323_vm_reg: ldo_vm{
+ regulator-name = "vm";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vio18_reg: ldo_vio18{
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ mt6323_vcamd_reg: ldo_vcamd{
+ regulator-name = "vcamd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+
+ mt6323_vcamio_reg: ldo_vcamio{
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <216>;
+ };
+ };
+ };
--
2.8.1
next prev parent reply other threads:[~2016-07-18 12:47 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-18 12:40 [PATCH V10 1/2] regulator: Add document for MT6323 regulator John Crispin
2016-07-18 12:40 ` John Crispin
2016-07-18 12:40 ` John Crispin
2016-07-18 12:40 ` [PATCH V10 2/2] regulator: mt6323: Add support " John Crispin
2016-07-18 12:40 ` John Crispin
2016-07-18 12:46 ` Applied "regulator: mt6323: Add support for MT6323 regulator" to the regulator tree Mark Brown
2016-07-18 12:46 ` Mark Brown
2016-07-18 12:46 ` Mark Brown
2016-07-18 12:46 ` Mark Brown [this message]
2016-07-18 12:46 ` Applied "regulator: Add document " Mark Brown
2016-07-18 12:46 ` Mark Brown
-- strict thread matches above, loose matches on Subject: below --
2016-02-17 11:37 [PATCH V6 1/2] regulator: Add document for MT6323 regulator John Crispin
2016-02-17 19:13 ` Applied "regulator: Add document for MT6323 regulator" to the regulator tree Mark Brown
2016-03-15 9:29 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1bP7wb-0001p5-BP@debutante \
--to=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=john@phrozen.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.