All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Cc: alsa-devel@alsa-project.org, broonie@kernel.org,
	patches@opensource.wolfsonmicro.com, lgirdwood@gmail.com
Subject: Applied "ASoC: wm_adsp: Add mechanism to preload firmware on a core" to the asoc tree
Date: Fri, 06 Jan 2017 18:16:45 +0000	[thread overview]
Message-ID: <E1cPZ4H-0003BV-PH@debutante> (raw)
In-Reply-To: <1483712681-7494-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>

The patch

   ASoC: wm_adsp: Add mechanism to preload firmware on a core

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From af813a6fd8740537bfa5801768e90cc95d9262a3 Mon Sep 17 00:00:00 2001
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Fri, 6 Jan 2017 14:24:41 +0000
Subject: [PATCH] ASoC: wm_adsp: Add mechanism to preload firmware on a core

As requirements to bring up audio paths are continuous getting tighter
and the DSP download to most ADSP devices happens over an external bus
it can become an important factor in the path bring up time. As such
sometimes it is a reasonable trade off to download the firmware ahead of
when it will be required and take a small hit on power consumption for
keeping the core powered up.

This "preloading" adds an additional control for each DSP core "DSPx
Preload Switch" that when set to true will power up the DSP core and
download the firmware currently selected in the "DSPx Firmware" control.
Whilst the core is preloaded the current firmware can not be changed and
the CODEC will be kept powered up and SYSCLK held on. Although future
improvements may allow the SYSCLK to be powered down as well because
the hardware only requires SYSCLK whilst the download is actually taking
place, but this is not covered in this series.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/codecs/arizona.h |  1 +
 sound/soc/codecs/cs47l24.c |  3 +++
 sound/soc/codecs/wm5102.c  |  2 ++
 sound/soc/codecs/wm5110.c  |  5 +++++
 sound/soc/codecs/wm_adsp.c | 45 ++++++++++++++++++++++++++++++++++++++++++++-
 sound/soc/codecs/wm_adsp.h | 11 +++++++++++
 6 files changed, 66 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/arizona.h b/sound/soc/codecs/arizona.h
index 56707860657c..1822e3b3de80 100644
--- a/sound/soc/codecs/arizona.h
+++ b/sound/soc/codecs/arizona.h
@@ -192,6 +192,7 @@ extern unsigned int arizona_mixer_values[ARIZONA_NUM_MIXER_INPUTS];
 #define ARIZONA_DSP_ROUTES(name) \
 	{ name, NULL, name " Preloader"}, \
 	{ name " Preloader", NULL, "SYSCLK" }, \
+	{ name " Preload", NULL, name " Preloader"}, \
 	{ name, NULL, name " Aux 1" }, \
 	{ name, NULL, name " Aux 2" }, \
 	{ name, NULL, name " Aux 3" }, \
diff --git a/sound/soc/codecs/cs47l24.c b/sound/soc/codecs/cs47l24.c
index 73559ae864b6..0dd721e3005d 100644
--- a/sound/soc/codecs/cs47l24.c
+++ b/sound/soc/codecs/cs47l24.c
@@ -173,6 +173,9 @@ SOC_ENUM("ISRC2 FSH", arizona_isrc_fsh[1]),
 SOC_ENUM("ISRC3 FSH", arizona_isrc_fsh[2]),
 SOC_ENUM("ASRC RATE 1", arizona_asrc_rate1),
 
+WM_ADSP2_PRELOAD_SWITCH("DSP2", 2),
+WM_ADSP2_PRELOAD_SWITCH("DSP3", 3),
+
 ARIZONA_MIXER_CONTROLS("DSP2L", ARIZONA_DSP2LMIX_INPUT_1_SOURCE),
 ARIZONA_MIXER_CONTROLS("DSP2R", ARIZONA_DSP2RMIX_INPUT_1_SOURCE),
 ARIZONA_MIXER_CONTROLS("DSP3L", ARIZONA_DSP3LMIX_INPUT_1_SOURCE),
diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c
index e7ab37d0dd32..9edd239c3b06 100644
--- a/sound/soc/codecs/wm5102.c
+++ b/sound/soc/codecs/wm5102.c
@@ -855,6 +855,8 @@ ARIZONA_LHPF_CONTROL("LHPF2 Coefficients", ARIZONA_HPLPF2_2),
 ARIZONA_LHPF_CONTROL("LHPF3 Coefficients", ARIZONA_HPLPF3_2),
 ARIZONA_LHPF_CONTROL("LHPF4 Coefficients", ARIZONA_HPLPF4_2),
 
+WM_ADSP2_PRELOAD_SWITCH("DSP1", 1),
+
 ARIZONA_MIXER_CONTROLS("DSP1L", ARIZONA_DSP1LMIX_INPUT_1_SOURCE),
 ARIZONA_MIXER_CONTROLS("DSP1R", ARIZONA_DSP1RMIX_INPUT_1_SOURCE),
 
diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c
index 585fc706c1b0..01b5b6c66417 100644
--- a/sound/soc/codecs/wm5110.c
+++ b/sound/soc/codecs/wm5110.c
@@ -778,6 +778,11 @@ SOC_ENUM("ISRC2 FSH", arizona_isrc_fsh[1]),
 SOC_ENUM("ISRC3 FSH", arizona_isrc_fsh[2]),
 SOC_ENUM("ASRC RATE 1", arizona_asrc_rate1),
 
+WM_ADSP2_PRELOAD_SWITCH("DSP1", 1),
+WM_ADSP2_PRELOAD_SWITCH("DSP2", 2),
+WM_ADSP2_PRELOAD_SWITCH("DSP3", 3),
+WM_ADSP2_PRELOAD_SWITCH("DSP4", 4),
+
 ARIZONA_MIXER_CONTROLS("DSP1L", ARIZONA_DSP1LMIX_INPUT_1_SOURCE),
 ARIZONA_MIXER_CONTROLS("DSP1R", ARIZONA_DSP1RMIX_INPUT_1_SOURCE),
 ARIZONA_MIXER_CONTROLS("DSP2L", ARIZONA_DSP2LMIX_INPUT_1_SOURCE),
diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c
index 593b7d1aed46..ed615ce8a496 100644
--- a/sound/soc/codecs/wm_adsp.c
+++ b/sound/soc/codecs/wm_adsp.c
@@ -2500,6 +2500,43 @@ static void wm_adsp2_set_dspclk(struct wm_adsp *dsp, unsigned int freq)
 		adsp_err(dsp, "Failed to set clock rate: %d\n", ret);
 }
 
+int wm_adsp2_preloader_get(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+	struct wm_adsp *dsp = snd_soc_codec_get_drvdata(codec);
+
+	ucontrol->value.integer.value[0] = dsp->preloaded;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(wm_adsp2_preloader_get);
+
+int wm_adsp2_preloader_put(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+	struct wm_adsp *dsp = snd_soc_codec_get_drvdata(codec);
+	struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
+	struct soc_mixer_control *mc =
+		(struct soc_mixer_control *)kcontrol->private_value;
+	char preload[32];
+
+	snprintf(preload, ARRAY_SIZE(preload), "DSP%d Preload", mc->shift);
+
+	dsp->preloaded = ucontrol->value.integer.value[0];
+
+	if (ucontrol->value.integer.value[0])
+		snd_soc_dapm_force_enable_pin(dapm, preload);
+	else
+		snd_soc_dapm_disable_pin(dapm, preload);
+
+	snd_soc_dapm_sync(dapm);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(wm_adsp2_preloader_put);
+
 int wm_adsp2_early_event(struct snd_soc_dapm_widget *w,
 			 struct snd_kcontrol *kcontrol, int event,
 			 unsigned int freq)
@@ -2631,10 +2668,16 @@ EXPORT_SYMBOL_GPL(wm_adsp2_event);
 
 int wm_adsp2_codec_probe(struct wm_adsp *dsp, struct snd_soc_codec *codec)
 {
-	dsp->codec = codec;
+	struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
+	char preload[32];
+
+	snprintf(preload, ARRAY_SIZE(preload), "DSP%d Preload", dsp->num);
+	snd_soc_dapm_disable_pin(dapm, preload);
 
 	wm_adsp2_init_debugfs(dsp, codec);
 
+	dsp->codec = codec;
+
 	return snd_soc_add_codec_controls(codec,
 					  &wm_adsp_fw_controls[dsp->num - 1],
 					  1);
diff --git a/sound/soc/codecs/wm_adsp.h b/sound/soc/codecs/wm_adsp.h
index 411d062c13f2..3706b11053a3 100644
--- a/sound/soc/codecs/wm_adsp.h
+++ b/sound/soc/codecs/wm_adsp.h
@@ -62,6 +62,7 @@ struct wm_adsp {
 	int fw;
 	int fw_ver;
 
+	bool preloaded;
 	bool booted;
 	bool running;
 
@@ -86,7 +87,12 @@ struct wm_adsp {
 	SND_SOC_DAPM_PGA_E(wname, SND_SOC_NOPM, num, 0, NULL, 0, \
 		wm_adsp1_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD)
 
+#define WM_ADSP2_PRELOAD_SWITCH(wname, num) \
+	SOC_SINGLE_EXT(wname " Preload Switch", SND_SOC_NOPM, num, 1, 0, \
+		wm_adsp2_preloader_get, wm_adsp2_preloader_put)
+
 #define WM_ADSP2(wname, num, event_fn) \
+	SND_SOC_DAPM_SPK(wname " Preload", NULL), \
 {	.id = snd_soc_dapm_supply, .name = wname " Preloader", \
 	.reg = SND_SOC_NOPM, .shift = num, .event = event_fn, \
 	.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD, \
@@ -110,6 +116,11 @@ int wm_adsp2_early_event(struct snd_soc_dapm_widget *w,
 int wm_adsp2_event(struct snd_soc_dapm_widget *w,
 		   struct snd_kcontrol *kcontrol, int event);
 
+int wm_adsp2_preloader_get(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *ucontrol);
+int wm_adsp2_preloader_put(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *ucontrol);
+
 int wm_adsp_compr_open(struct wm_adsp *dsp, struct snd_compr_stream *stream);
 int wm_adsp_compr_free(struct snd_compr_stream *stream);
 int wm_adsp_compr_set_params(struct snd_compr_stream *stream,
-- 
2.11.0

      reply	other threads:[~2017-01-06 18:16 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-06 14:24 [PATCH] ASoC: wm_adsp: Add mechanism to preload firmware on a core Charles Keepax
2017-01-06 18:16 ` Mark Brown [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1cPZ4H-0003BV-PH@debutante \
    --to=broonie@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=ckeepax@opensource.wolfsonmicro.com \
    --cc=lgirdwood@gmail.com \
    --cc=patches@opensource.wolfsonmicro.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.