All of lore.kernel.org
 help / color / mirror / Atom feed
From: Russell King <rmk+kernel@armlinux.org.uk>
To: linux-arm-msm@vger.kernel.org
Cc: Tony Lindgren <tony@atomide.com>,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] ARM: omap2: remove unnecessary boot_lock
Date: Thu, 13 Dec 2018 11:55:36 +0000	[thread overview]
Message-ID: <E1gXPaa-00063v-L6@rmk-PC.armlinux.org.uk> (raw)

The boot_lock is something that was required for ARM development
platforms to ensure that the delay calibration worked properly.  This
is not necessary for modern platforms that have better bus bandwidth
and do not need to calibrate the delay loop for secondary cores.
Remove the boot_lock entirely.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 arch/arm/mach-omap2/omap-smp.c | 20 --------------------
 1 file changed, 20 deletions(-)

diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 1c73694c871a..10e070368f64 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -69,8 +69,6 @@ static const struct omap_smp_config omap5_cfg __initconst = {
 	.startup_addr = omap5_secondary_startup,
 };
 
-static DEFINE_SPINLOCK(boot_lock);
-
 void __iomem *omap4_get_scu_base(void)
 {
 	return cfg.scu_base;
@@ -173,12 +171,6 @@ static void omap4_secondary_init(unsigned int cpu)
 		/* Enable ACR to allow for ICUALLU workaround */
 		omap5_secondary_harden_predictor();
 	}
-
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
 }
 
 static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
@@ -188,12 +180,6 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	static struct powerdomain *cpu1_pwrdm;
 
 	/*
-	 * Set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/*
 	 * Update the AuxCoreBoot0 with boot state for secondary core.
 	 * omap4_secondary_startup() routine will hold the secondary core till
 	 * the AuxCoreBoot1 register is updated with cpu state
@@ -266,12 +252,6 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
-	/*
-	 * Now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
 	return 0;
 }
 
-- 
2.7.4

WARNING: multiple messages have this Message-ID (diff)
From: Russell King <rmk+kernel@armlinux.org.uk>
To: linux-arm-msm@vger.kernel.org
Cc: Tony Lindgren <tony@atomide.com>,
	linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/5] ARM: omap2: remove unnecessary boot_lock
Date: Thu, 13 Dec 2018 11:55:36 +0000	[thread overview]
Message-ID: <E1gXPaa-00063v-L6@rmk-PC.armlinux.org.uk> (raw)

The boot_lock is something that was required for ARM development
platforms to ensure that the delay calibration worked properly.  This
is not necessary for modern platforms that have better bus bandwidth
and do not need to calibrate the delay loop for secondary cores.
Remove the boot_lock entirely.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 arch/arm/mach-omap2/omap-smp.c | 20 --------------------
 1 file changed, 20 deletions(-)

diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 1c73694c871a..10e070368f64 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -69,8 +69,6 @@ static const struct omap_smp_config omap5_cfg __initconst = {
 	.startup_addr = omap5_secondary_startup,
 };
 
-static DEFINE_SPINLOCK(boot_lock);
-
 void __iomem *omap4_get_scu_base(void)
 {
 	return cfg.scu_base;
@@ -173,12 +171,6 @@ static void omap4_secondary_init(unsigned int cpu)
 		/* Enable ACR to allow for ICUALLU workaround */
 		omap5_secondary_harden_predictor();
 	}
-
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
 }
 
 static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
@@ -188,12 +180,6 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	static struct powerdomain *cpu1_pwrdm;
 
 	/*
-	 * Set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/*
 	 * Update the AuxCoreBoot0 with boot state for secondary core.
 	 * omap4_secondary_startup() routine will hold the secondary core till
 	 * the AuxCoreBoot1 register is updated with cpu state
@@ -266,12 +252,6 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
-	/*
-	 * Now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
 	return 0;
 }
 
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2018-12-13 11:55 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-13 11:55 Russell King [this message]
2018-12-13 11:55 ` [PATCH 1/5] ARM: omap2: remove unnecessary boot_lock Russell King
2018-12-13 17:05 ` Tony Lindgren
2018-12-13 17:05   ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1gXPaa-00063v-L6@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.