All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Herbert Xu" <herbert@gondor.apana.org.au>
To: Ard Biesheuvel <ardb@kernel.org>,
	Stephan Mueller <smueller@chronox.de>,
	Linux Crypto Mailing List <linux-crypto@vger.kernel.org>,
	Eric Biggers <ebiggers@kernel.org>
Subject: [v3 PATCH 24/31] crypto: ixp4xx - Remove rfc3686 implementation
Date: Tue, 28 Jul 2020 17:19:33 +1000	[thread overview]
Message-ID: <E1k0Jtd-0006Ue-HU@fornost.hmeau.com> (raw)
In-Reply-To: 20200728071746.GA22352@gondor.apana.org.au

The rfc3686 implementation in ixp4xx is pretty much the same
as the generic rfc3686 wrapper.  So it can simply be removed to
reduce complexity.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---

 drivers/crypto/ixp4xx_crypto.c |   53 -----------------------------------------
 1 file changed, 53 deletions(-)

diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index f478bb0a566af..c93f5db8d0503 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -180,7 +180,6 @@ struct ixp_ctx {
 	int enckey_len;
 	u8 enckey[MAX_KEYLEN];
 	u8 salt[MAX_IVLEN];
-	u8 nonce[CTR_RFC3686_NONCE_SIZE];
 	unsigned salted;
 	atomic_t configuring;
 	struct completion completion;
@@ -848,22 +847,6 @@ static int ablk_des3_setkey(struct crypto_skcipher *tfm, const u8 *key,
 	       ablk_setkey(tfm, key, key_len);
 }
 
-static int ablk_rfc3686_setkey(struct crypto_skcipher *tfm, const u8 *key,
-		unsigned int key_len)
-{
-	struct ixp_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-	/* the nonce is stored in bytes at end of key */
-	if (key_len < CTR_RFC3686_NONCE_SIZE)
-		return -EINVAL;
-
-	memcpy(ctx->nonce, key + (key_len - CTR_RFC3686_NONCE_SIZE),
-			CTR_RFC3686_NONCE_SIZE);
-
-	key_len -= CTR_RFC3686_NONCE_SIZE;
-	return ablk_setkey(tfm, key, key_len);
-}
-
 static int ablk_perform(struct skcipher_request *req, int encrypt)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
@@ -947,28 +930,6 @@ static int ablk_decrypt(struct skcipher_request *req)
 	return ablk_perform(req, 0);
 }
 
-static int ablk_rfc3686_crypt(struct skcipher_request *req)
-{
-	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct ixp_ctx *ctx = crypto_skcipher_ctx(tfm);
-	u8 iv[CTR_RFC3686_BLOCK_SIZE];
-	u8 *info = req->iv;
-	int ret;
-
-	/* set up counter block */
-        memcpy(iv, ctx->nonce, CTR_RFC3686_NONCE_SIZE);
-	memcpy(iv + CTR_RFC3686_NONCE_SIZE, info, CTR_RFC3686_IV_SIZE);
-
-	/* initialize counter portion of counter block */
-	*(__be32 *)(iv + CTR_RFC3686_NONCE_SIZE + CTR_RFC3686_IV_SIZE) =
-		cpu_to_be32(1);
-
-	req->iv = iv;
-	ret = ablk_perform(req, 1);
-	req->iv = info;
-	return ret;
-}
-
 static int aead_perform(struct aead_request *req, int encrypt,
 		int cryptoffset, int eff_cryptlen, u8 *iv)
 {
@@ -1269,20 +1230,6 @@ static struct ixp_alg ixp4xx_algos[] = {
 	},
 	.cfg_enc = CIPH_ENCR | MOD_AES | MOD_CTR,
 	.cfg_dec = CIPH_ENCR | MOD_AES | MOD_CTR,
-}, {
-	.crypto	= {
-		.base.cra_name		= "rfc3686(ctr(aes))",
-		.base.cra_blocksize	= 1,
-
-		.min_keysize		= AES_MIN_KEY_SIZE,
-		.max_keysize		= AES_MAX_KEY_SIZE,
-		.ivsize			= AES_BLOCK_SIZE,
-		.setkey			= ablk_rfc3686_setkey,
-		.encrypt		= ablk_rfc3686_crypt,
-		.decrypt		= ablk_rfc3686_crypt,
-	},
-	.cfg_enc = CIPH_ENCR | MOD_AES | MOD_CTR,
-	.cfg_dec = CIPH_ENCR | MOD_AES | MOD_CTR,
 } };
 
 static struct ixp_aead_alg ixp4xx_aeads[] = {

  parent reply	other threads:[~2020-07-28  7:19 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-28  7:17 [v3 PATCH 0/31] crypto: skcipher - Add support for no chaining and partial chaining Herbert Xu
2020-07-28  7:18 ` [v3 PATCH 1/31] crypto: skcipher - Add final chunk size field for chaining Herbert Xu
2020-07-28 17:15   ` Eric Biggers
2020-07-28 17:22     ` Herbert Xu
2020-07-28 17:26       ` Ard Biesheuvel
2020-07-28 17:30         ` Herbert Xu
2020-07-28 17:46           ` Ard Biesheuvel
2020-07-28 22:12             ` Herbert Xu
2020-07-28  7:18 ` [v3 PATCH 2/31] crypto: algif_skcipher - Add support for final_chunksize Herbert Xu
2020-07-28  7:18 ` [v3 PATCH 3/31] crypto: cts - Add support for chaining Herbert Xu
2020-07-28 11:05   ` Ard Biesheuvel
2020-07-28 11:53     ` Herbert Xu
2020-07-28 11:59       ` Ard Biesheuvel
2020-07-28 12:03         ` Herbert Xu
2020-07-28 12:08           ` Ard Biesheuvel
2020-07-28 12:19             ` Herbert Xu
2020-07-28  7:18 ` [v3 PATCH 4/31] crypto: arm64/aes-glue - Add support for chaining CTS Herbert Xu
2020-07-28  7:18 ` [v3 PATCH 5/31] crypto: nitrox " Herbert Xu
2020-07-28  7:18 ` [v3 PATCH 6/31] crypto: ccree " Herbert Xu
2020-07-28  7:18 ` [v3 PATCH 7/31] crypto: skcipher - Add alg reqsize field Herbert Xu
2020-07-28  7:18 ` [v3 PATCH 8/31] crypto: skcipher - Initialise requests to zero Herbert Xu
2020-07-28 17:10   ` Eric Biggers
2020-07-29  3:38     ` Herbert Xu
2020-07-28  7:18 ` [v3 PATCH 9/31] crypto: cryptd - Add support for chaining Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 10/31] crypto: chacha-generic " Herbert Xu
2020-08-10 15:20   ` Horia Geantă
2020-08-11  0:57     ` Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 11/31] crypto: arm/chacha " Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 12/31] crypto: arm64/chacha " Herbert Xu
2020-07-29  6:16   ` Ard Biesheuvel
2020-07-29  6:28     ` Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 13/31] crypto: mips/chacha " Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 14/31] crypto: x86/chacha " Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 15/31] crypto: inside-secure - Set final_chunksize on chacha Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 16/31] crypto: caam/qi2 " Herbert Xu
2020-08-10 15:24   ` Horia Geantă
2020-07-28  7:19 ` [v3 PATCH 17/31] crypto: ctr - Allow rfc3686 to be chained Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 18/31] crypto: crypto4xx - Remove rfc3686 implementation Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 19/31] crypto: caam - Remove rfc3686 implementations Herbert Xu
2020-08-10 16:47   ` Horia Geantă
2020-08-11  0:59     ` Herbert Xu
2020-08-11  7:32       ` Horia Geantă
2020-08-11  7:34         ` Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 20/31] crypto: nitrox - Set final_chunksize on rfc3686 Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 21/31] crypto: ccp - Remove rfc3686 implementation Herbert Xu
2020-08-06 19:16   ` John Allen
2020-07-28  7:19 ` [v3 PATCH 22/31] crypto: chelsio " Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 23/31] crypto: inside-secure - Set final_chunksize on rfc3686 Herbert Xu
2020-07-28  7:19 ` Herbert Xu [this message]
2020-07-28  7:19 ` [v3 PATCH 25/31] crypto: nx " Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 26/31] crypto: essiv - Set final_chunksize Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 27/31] crypto: simd - Add support for chaining Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 28/31] crypto: arm64/essiv - Set final_chunksize Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 29/31] crypto: ccree - Set final_chunksize on essiv Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 30/31] crypto: kw - Set final_chunksize Herbert Xu
2020-07-28  7:19 ` [v3 PATCH 31/31] crypto: salsa20-generic - dd support for chaining Herbert Xu
2020-07-28 17:19 ` [v3 PATCH 0/31] crypto: skcipher - Add support for no chaining and partial chaining Eric Biggers
2020-07-29  3:40   ` Herbert Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1k0Jtd-0006Ue-HU@fornost.hmeau.com \
    --to=herbert@gondor.apana.org.au \
    --cc=ardb@kernel.org \
    --cc=ebiggers@kernel.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=smueller@chronox.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.