All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: "Alexandre Belloni" <alexandre.belloni@bootlin.com>,
	"Alvin __ipraga" <alsi@bang-olufsen.dk>,
	"Claudiu Manoil" <claudiu.manoil@nxp.com>,
	"David S. Miller" <davem@davemloft.net>,
	"DENG Qingfang" <dqfext@gmail.com>,
	"Eric Dumazet" <edumazet@google.com>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"George McCollister" <george.mccollister@gmail.com>,
	"Hauke Mehrtens" <hauke@hauke-m.de>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Kurt Kanzenbach" <kurt@linutronix.de>,
	"Landen Chao" <Landen.Chao@mediatek.com>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	"Matthias Brugger" <matthias.bgg@gmail.com>,
	netdev@vger.kernel.org, "Paolo Abeni" <pabeni@redhat.com>,
	"Sean Wang" <sean.wang@mediatek.com>,
	UNGLinuxDriver@microchip.com,
	"Vivien Didelot" <vivien.didelot@gmail.com>,
	"Vladimir Oltean" <olteanv@gmail.com>,
	"Woojung Huh" <woojung.huh@microchip.com>,
	"Marek Behún" <kabel@kernel.org>
Subject: [PATCH RFC net-next 3/6] net: phylink: split out interface to caps translation
Date: Wed, 29 Jun 2022 13:51:33 +0100	[thread overview]
Message-ID: <E1o6XAL-004pVp-36@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <YrxKdVmBzeMsVjsH@shell.armlinux.org.uk>

phylink_get_linkmodes() translates the interface mode into a set of
speed and duplex capabilities which are masked with the MAC modes
to then derive the link modes that are available.

Split out the initial transformation into a new function
phylink_interface_to_caps(), which will be useful when setting the
maximum fixed link speed.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/phylink.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 1a7550f5fdf5..4645ac6e553d 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -296,18 +296,7 @@ static void phylink_caps_to_linkmodes(unsigned long *linkmodes,
 	}
 }
 
-/**
- * phylink_get_linkmodes() - get acceptable link modes
- * @linkmodes: ethtool linkmode mask (must be already initialised)
- * @interface: phy interface mode defined by &typedef phy_interface_t
- * @mac_capabilities: bitmask of MAC capabilities
- *
- * Set all possible pause, speed and duplex linkmodes in @linkmodes that
- * are supported by the @interface mode and @mac_capabilities. @linkmodes
- * must have been initialised previously.
- */
-void phylink_get_linkmodes(unsigned long *linkmodes, phy_interface_t interface,
-			   unsigned long mac_capabilities)
+static unsigned long phylink_interface_to_caps(phy_interface_t interface)
 {
 	unsigned long caps = MAC_SYM_PAUSE | MAC_ASYM_PAUSE;
 
@@ -381,6 +370,24 @@ void phylink_get_linkmodes(unsigned long *linkmodes, phy_interface_t interface,
 		break;
 	}
 
+	return caps;
+}
+
+/**
+ * phylink_get_linkmodes() - get acceptable link modes
+ * @linkmodes: ethtool linkmode mask (must be already initialised)
+ * @interface: phy interface mode defined by &typedef phy_interface_t
+ * @mac_capabilities: bitmask of MAC capabilities
+ *
+ * Set all possible pause, speed and duplex linkmodes in @linkmodes that
+ * are supported by the @interface mode and @mac_capabilities. @linkmodes
+ * must have been initialised previously.
+ */
+void phylink_get_linkmodes(unsigned long *linkmodes, phy_interface_t interface,
+			   unsigned long mac_capabilities)
+{
+	unsigned long caps = phylink_interface_to_caps(interface);
+
 	phylink_caps_to_linkmodes(linkmodes, caps & mac_capabilities);
 }
 EXPORT_SYMBOL_GPL(phylink_get_linkmodes);
-- 
2.30.2


WARNING: multiple messages have this Message-ID (diff)
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: "Alexandre Belloni" <alexandre.belloni@bootlin.com>,
	"Alvin __ipraga" <alsi@bang-olufsen.dk>,
	"Claudiu Manoil" <claudiu.manoil@nxp.com>,
	"David S. Miller" <davem@davemloft.net>,
	"DENG Qingfang" <dqfext@gmail.com>,
	"Eric Dumazet" <edumazet@google.com>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"George McCollister" <george.mccollister@gmail.com>,
	"Hauke Mehrtens" <hauke@hauke-m.de>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Kurt Kanzenbach" <kurt@linutronix.de>,
	"Landen Chao" <Landen.Chao@mediatek.com>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	"Matthias Brugger" <matthias.bgg@gmail.com>,
	netdev@vger.kernel.org, "Paolo Abeni" <pabeni@redhat.com>,
	"Sean Wang" <sean.wang@mediatek.com>,
	UNGLinuxDriver@microchip.com,
	"Vivien Didelot" <vivien.didelot@gmail.com>,
	"Vladimir Oltean" <olteanv@gmail.com>,
	"Woojung Huh" <woojung.huh@microchip.com>,
	"Marek Behún" <kabel@kernel.org>
Subject: [PATCH RFC net-next 3/6] net: phylink: split out interface to caps translation
Date: Wed, 29 Jun 2022 13:51:33 +0100	[thread overview]
Message-ID: <E1o6XAL-004pVp-36@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <YrxKdVmBzeMsVjsH@shell.armlinux.org.uk>

phylink_get_linkmodes() translates the interface mode into a set of
speed and duplex capabilities which are masked with the MAC modes
to then derive the link modes that are available.

Split out the initial transformation into a new function
phylink_interface_to_caps(), which will be useful when setting the
maximum fixed link speed.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/phylink.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 1a7550f5fdf5..4645ac6e553d 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -296,18 +296,7 @@ static void phylink_caps_to_linkmodes(unsigned long *linkmodes,
 	}
 }
 
-/**
- * phylink_get_linkmodes() - get acceptable link modes
- * @linkmodes: ethtool linkmode mask (must be already initialised)
- * @interface: phy interface mode defined by &typedef phy_interface_t
- * @mac_capabilities: bitmask of MAC capabilities
- *
- * Set all possible pause, speed and duplex linkmodes in @linkmodes that
- * are supported by the @interface mode and @mac_capabilities. @linkmodes
- * must have been initialised previously.
- */
-void phylink_get_linkmodes(unsigned long *linkmodes, phy_interface_t interface,
-			   unsigned long mac_capabilities)
+static unsigned long phylink_interface_to_caps(phy_interface_t interface)
 {
 	unsigned long caps = MAC_SYM_PAUSE | MAC_ASYM_PAUSE;
 
@@ -381,6 +370,24 @@ void phylink_get_linkmodes(unsigned long *linkmodes, phy_interface_t interface,
 		break;
 	}
 
+	return caps;
+}
+
+/**
+ * phylink_get_linkmodes() - get acceptable link modes
+ * @linkmodes: ethtool linkmode mask (must be already initialised)
+ * @interface: phy interface mode defined by &typedef phy_interface_t
+ * @mac_capabilities: bitmask of MAC capabilities
+ *
+ * Set all possible pause, speed and duplex linkmodes in @linkmodes that
+ * are supported by the @interface mode and @mac_capabilities. @linkmodes
+ * must have been initialised previously.
+ */
+void phylink_get_linkmodes(unsigned long *linkmodes, phy_interface_t interface,
+			   unsigned long mac_capabilities)
+{
+	unsigned long caps = phylink_interface_to_caps(interface);
+
 	phylink_caps_to_linkmodes(linkmodes, caps & mac_capabilities);
 }
 EXPORT_SYMBOL_GPL(phylink_get_linkmodes);
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-06-29 12:51 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-29 12:49 [PATCH RFC net-next 0/6] net: dsa: always use phylink Russell King (Oracle)
2022-06-29 12:49 ` Russell King (Oracle)
2022-06-29 12:51 ` [PATCH RFC net-next 1/6] net: dsa: add support for retrieving the interface mode Russell King (Oracle)
2022-06-29 12:51   ` Russell King (Oracle)
2022-07-01 19:20   ` Marek Behún
2022-07-01 19:20     ` Marek Behún
2022-06-29 12:51 ` [PATCH RFC net-next 2/6] net: dsa: mv88e6xxx: report the default interface mode for the port Russell King (Oracle)
2022-06-29 12:51   ` Russell King (Oracle)
2022-07-01 19:25   ` Marek Behún
2022-07-01 19:25     ` Marek Behún
2022-06-29 12:51 ` Russell King (Oracle) [this message]
2022-06-29 12:51   ` [PATCH RFC net-next 3/6] net: phylink: split out interface to caps translation Russell King (Oracle)
2022-07-01 19:27   ` Marek Behún
2022-07-01 19:27     ` Marek Behún
2022-06-29 12:51 ` [PATCH RFC net-next 4/6] net: phylink: add phylink_set_max_fixed_link() Russell King (Oracle)
2022-06-29 12:51   ` Russell King (Oracle)
2022-07-01 19:31   ` Marek Behún
2022-07-01 19:31     ` Marek Behún
2022-06-29 12:51 ` [PATCH RFC net-next 5/6] net: dsa: always use phylink for CPU and DSA ports Russell King (Oracle)
2022-06-29 12:51   ` Russell King (Oracle)
2022-07-01 19:34   ` Marek Behún
2022-07-01 19:34     ` Marek Behún
2022-07-02 20:27     ` Russell King (Oracle)
2022-07-02 20:27       ` Russell King (Oracle)
2022-06-29 12:51 ` [PATCH RFC net-next 6/6] net: phylink: debug print Russell King (Oracle)
2022-06-29 12:51   ` Russell King (Oracle)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1o6XAL-004pVp-36@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=Landen.Chao@mediatek.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=alsi@bang-olufsen.dk \
    --cc=andrew@lunn.ch \
    --cc=claudiu.manoil@nxp.com \
    --cc=davem@davemloft.net \
    --cc=dqfext@gmail.com \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=george.mccollister@gmail.com \
    --cc=hauke@hauke-m.de \
    --cc=hkallweit1@gmail.com \
    --cc=kabel@kernel.org \
    --cc=kuba@kernel.org \
    --cc=kurt@linutronix.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=sean.wang@mediatek.com \
    --cc=vivien.didelot@gmail.com \
    --cc=woojung.huh@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.