All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Vladimir Oltean <olteanv@gmail.com>
Cc: "Cl__ment L__ger" <clement.leger@bootlin.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	linux-renesas-soc@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH net-next] net: dsa: rzn1_a5psw: provide own phylink MAC operations
Date: Tue, 16 Apr 2024 11:19:19 +0100	[thread overview]
Message-ID: <E1rwfuJ-00753D-6d@rmk-PC.armlinux.org.uk> (raw)

Convert rzn1_a5psw to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c. We need to provide a stub for
the mac_config() method which is mandatory.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/dsa/rzn1_a5psw.c | 47 ++++++++++++++++++++++++------------
 1 file changed, 31 insertions(+), 16 deletions(-)

diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
index 10092ea85e46..92e032972b34 100644
--- a/drivers/net/dsa/rzn1_a5psw.c
+++ b/drivers/net/dsa/rzn1_a5psw.c
@@ -239,23 +239,31 @@ static void a5psw_phylink_get_caps(struct dsa_switch *ds, int port,
 }
 
 static struct phylink_pcs *
-a5psw_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
+a5psw_phylink_mac_select_pcs(struct phylink_config *config,
 			     phy_interface_t interface)
 {
-	struct dsa_port *dp = dsa_to_port(ds, port);
-	struct a5psw *a5psw = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct a5psw *a5psw = dp->ds->priv;
 
-	if (!dsa_port_is_cpu(dp) && a5psw->pcs[port])
-		return a5psw->pcs[port];
+	if (dsa_port_is_cpu(dp))
+		return NULL;
 
-	return NULL;
+	return a5psw->pcs[dp->index];
+}
+
+static void a5psw_phylink_mac_config(struct phylink_config *config,
+				     unsigned int mode,
+				     const struct phylink_link_state *state)
+{
 }
 
-static void a5psw_phylink_mac_link_down(struct dsa_switch *ds, int port,
+static void a5psw_phylink_mac_link_down(struct phylink_config *config,
 					unsigned int mode,
 					phy_interface_t interface)
 {
-	struct a5psw *a5psw = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct a5psw *a5psw = dp->ds->priv;
+	int port = dp->index;
 	u32 cmd_cfg;
 
 	cmd_cfg = a5psw_reg_readl(a5psw, A5PSW_CMD_CFG(port));
@@ -263,15 +271,17 @@ static void a5psw_phylink_mac_link_down(struct dsa_switch *ds, int port,
 	a5psw_reg_writel(a5psw, A5PSW_CMD_CFG(port), cmd_cfg);
 }
 
-static void a5psw_phylink_mac_link_up(struct dsa_switch *ds, int port,
+static void a5psw_phylink_mac_link_up(struct phylink_config *config,
+				      struct phy_device *phydev,
 				      unsigned int mode,
 				      phy_interface_t interface,
-				      struct phy_device *phydev, int speed,
-				      int duplex, bool tx_pause, bool rx_pause)
+				      int speed, int duplex, bool tx_pause,
+				      bool rx_pause)
 {
 	u32 cmd_cfg = A5PSW_CMD_CFG_RX_ENA | A5PSW_CMD_CFG_TX_ENA |
 		      A5PSW_CMD_CFG_TX_CRC_APPEND;
-	struct a5psw *a5psw = ds->priv;
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct a5psw *a5psw = dp->ds->priv;
 
 	if (speed == SPEED_1000)
 		cmd_cfg |= A5PSW_CMD_CFG_ETH_SPEED;
@@ -284,7 +294,7 @@ static void a5psw_phylink_mac_link_up(struct dsa_switch *ds, int port,
 	if (!rx_pause)
 		cmd_cfg &= ~A5PSW_CMD_CFG_PAUSE_IGNORE;
 
-	a5psw_reg_writel(a5psw, A5PSW_CMD_CFG(port), cmd_cfg);
+	a5psw_reg_writel(a5psw, A5PSW_CMD_CFG(dp->index), cmd_cfg);
 }
 
 static int a5psw_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
@@ -992,15 +1002,19 @@ static int a5psw_setup(struct dsa_switch *ds)
 	return 0;
 }
 
+static const struct phylink_mac_ops a5psw_phylink_mac_ops = {
+	.mac_select_pcs = a5psw_phylink_mac_select_pcs,
+	.mac_config = a5psw_phylink_mac_config,
+	.mac_link_down = a5psw_phylink_mac_link_down,
+	.mac_link_up = a5psw_phylink_mac_link_up,
+};
+
 static const struct dsa_switch_ops a5psw_switch_ops = {
 	.get_tag_protocol = a5psw_get_tag_protocol,
 	.setup = a5psw_setup,
 	.port_disable = a5psw_port_disable,
 	.port_enable = a5psw_port_enable,
 	.phylink_get_caps = a5psw_phylink_get_caps,
-	.phylink_mac_select_pcs = a5psw_phylink_mac_select_pcs,
-	.phylink_mac_link_down = a5psw_phylink_mac_link_down,
-	.phylink_mac_link_up = a5psw_phylink_mac_link_up,
 	.port_change_mtu = a5psw_port_change_mtu,
 	.port_max_mtu = a5psw_port_max_mtu,
 	.get_sset_count = a5psw_get_sset_count,
@@ -1252,6 +1266,7 @@ static int a5psw_probe(struct platform_device *pdev)
 	ds->dev = dev;
 	ds->num_ports = A5PSW_PORTS_NUM;
 	ds->ops = &a5psw_switch_ops;
+	ds->phylink_mac_ops = &a5psw_phylink_mac_ops;
 	ds->priv = a5psw;
 
 	ret = dsa_register_switch(ds);
-- 
2.30.2


             reply	other threads:[~2024-04-16 10:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-16 10:19 Russell King (Oracle) [this message]
2024-04-18  1:40 ` [PATCH net-next] net: dsa: rzn1_a5psw: provide own phylink MAC operations patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1rwfuJ-00753D-6d@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=andrew@lunn.ch \
    --cc=clement.leger@bootlin.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.