From: Jonas Karlman <jonas@kwiboo.se>
To: Heiko Stuebner <heiko@sntech.de>, Sandy Huang <hjc@rock-chips.com>
Cc: Jonas Karlman <jonas@kwiboo.se>,
Kishon Vijay Abraham I <kishon@ti.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Zheng Yang <zhengyang@rock-chips.com>,
"linux-rockchip@lists.infradead.org"
<linux-rockchip@lists.infradead.org>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH 11/15] arm64: dts: rockchip: add vpll clock to hdmi node on rk3328
Date: Mon, 6 Jan 2020 20:49:27 +0000 [thread overview]
Message-ID: <HE1PR06MB4011274027CCF289492C661BAC3C0@HE1PR06MB4011.eurprd06.prod.outlook.com> (raw)
In-Reply-To: <20200106204914.6001-1-jonas@kwiboo.se>
Add the hdmiphy clock as the vpll in hdmi node.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index ee4b6170a9e6..987c04abb387 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -703,9 +703,11 @@
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI>,
<&cru SCLK_HDMI_SFC>,
+ <&hdmiphy>,
<&cru SCLK_RTC32K>;
clock-names = "iahb",
"isfr",
+ "vpll",
"cec";
phys = <&hdmiphy>;
phy-names = "hdmi";
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Jonas Karlman <jonas@kwiboo.se>
To: Heiko Stuebner <heiko@sntech.de>, Sandy Huang <hjc@rock-chips.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
Jonas Karlman <jonas@kwiboo.se>, David Airlie <airlied@linux.ie>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
"linux-rockchip@lists.infradead.org"
<linux-rockchip@lists.infradead.org>,
Rob Herring <robh+dt@kernel.org>, Daniel Vetter <daniel@ffwll.ch>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
Zheng Yang <zhengyang@rock-chips.com>
Subject: [PATCH 11/15] arm64: dts: rockchip: add vpll clock to hdmi node on rk3328
Date: Mon, 6 Jan 2020 20:49:27 +0000 [thread overview]
Message-ID: <HE1PR06MB4011274027CCF289492C661BAC3C0@HE1PR06MB4011.eurprd06.prod.outlook.com> (raw)
In-Reply-To: <20200106204914.6001-1-jonas@kwiboo.se>
Add the hdmiphy clock as the vpll in hdmi node.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index ee4b6170a9e6..987c04abb387 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -703,9 +703,11 @@
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI>,
<&cru SCLK_HDMI_SFC>,
+ <&hdmiphy>,
<&cru SCLK_RTC32K>;
clock-names = "iahb",
"isfr",
+ "vpll",
"cec";
phys = <&hdmiphy>;
phy-names = "hdmi";
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Jonas Karlman <jonas@kwiboo.se>
To: Heiko Stuebner <heiko@sntech.de>, Sandy Huang <hjc@rock-chips.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
Jonas Karlman <jonas@kwiboo.se>, David Airlie <airlied@linux.ie>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"dri-devel@lists.freedesktop.org"
<dri-devel@lists.freedesktop.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
"linux-rockchip@lists.infradead.org"
<linux-rockchip@lists.infradead.org>,
Rob Herring <robh+dt@kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
Zheng Yang <zhengyang@rock-chips.com>
Subject: [PATCH 11/15] arm64: dts: rockchip: add vpll clock to hdmi node on rk3328
Date: Mon, 6 Jan 2020 20:49:27 +0000 [thread overview]
Message-ID: <HE1PR06MB4011274027CCF289492C661BAC3C0@HE1PR06MB4011.eurprd06.prod.outlook.com> (raw)
In-Reply-To: <20200106204914.6001-1-jonas@kwiboo.se>
Add the hdmiphy clock as the vpll in hdmi node.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index ee4b6170a9e6..987c04abb387 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -703,9 +703,11 @@
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI>,
<&cru SCLK_HDMI_SFC>,
+ <&hdmiphy>,
<&cru SCLK_RTC32K>;
clock-names = "iahb",
"isfr",
+ "vpll",
"cec";
phys = <&hdmiphy>;
phy-names = "hdmi";
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-01-06 20:49 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-06 20:46 [PATCH 00/15] Support more HDMI modes on RK3228/RK3328 Jonas Karlman
2020-01-06 20:46 ` Jonas Karlman
2020-01-06 20:46 ` Jonas Karlman
2020-01-06 20:46 ` Jonas Karlman
2020-01-06 20:47 ` [PATCH 01/15] phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328 Jonas Karlman
2020-01-06 20:47 ` Jonas Karlman
2020-01-06 20:47 ` Jonas Karlman
2020-01-06 20:47 ` Jonas Karlman
[not found] ` <20200106204723.5889-1-jonas@kwiboo.se>
2020-01-06 20:47 ` [PATCH 02/15] phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rate Jonas Karlman
2020-01-06 20:47 ` Jonas Karlman
2020-01-06 20:47 ` Jonas Karlman
2020-01-06 20:47 ` Jonas Karlman
2020-01-06 20:47 ` [PATCH 03/15] phy/rockchip: inno-hdmi: remove unused no_c from " Jonas Karlman
2020-01-06 20:47 ` Jonas Karlman
2020-01-06 20:47 ` Jonas Karlman
2020-01-06 20:47 ` Jonas Karlman
2020-01-06 20:47 ` [PATCH 04/15] phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write Jonas Karlman
2020-01-06 20:47 ` Jonas Karlman
2020-01-06 20:47 ` Jonas Karlman
2020-01-06 20:47 ` Jonas Karlman
2020-01-06 20:48 ` [PATCH 05/15] phy/rockchip: inno-hdmi: force set_rate on power_on Jonas Karlman
2020-01-06 20:48 ` Jonas Karlman
2020-01-06 20:48 ` Jonas Karlman
2020-01-06 20:48 ` Jonas Karlman
[not found] ` <20200106204812.5944-1-jonas@kwiboo.se>
2020-01-06 20:48 ` [PATCH 06/15] drm/rockchip: vop: limit resolution width to 3840 Jonas Karlman
2020-01-06 20:48 ` Jonas Karlman
2020-01-06 20:48 ` Jonas Karlman
2020-01-06 20:48 ` Jonas Karlman
2020-01-06 21:18 ` Heiko Stübner
2020-01-06 21:18 ` Heiko Stübner
2020-01-06 21:18 ` Heiko Stübner
2020-01-06 21:18 ` Heiko Stübner
2020-01-06 21:34 ` Jonas Karlman
2020-01-06 21:34 ` Jonas Karlman
2020-01-06 21:34 ` Jonas Karlman
2020-01-06 21:34 ` Jonas Karlman
2020-01-06 20:48 ` [PATCH 07/15] drm/rockchip: dw-hdmi: allow high tmds bit rates Jonas Karlman
2020-01-06 20:48 ` Jonas Karlman
2020-01-06 20:48 ` Jonas Karlman
2020-01-06 20:48 ` Jonas Karlman
2020-01-06 20:48 ` [PATCH 08/15] drm/rockchip: dw-hdmi: require valid vpll clock rate on rk3228/rk3328 Jonas Karlman
2020-01-06 20:48 ` Jonas Karlman
2020-01-06 20:48 ` Jonas Karlman
2020-01-06 20:48 ` Jonas Karlman
2020-01-06 20:49 ` [PATCH 09/15] clk: rockchip: set parent rate for DCLK_VOP clock on rk3228 Jonas Karlman
2020-01-06 20:49 ` Jonas Karlman
2020-01-06 20:49 ` Jonas Karlman
2020-01-06 20:49 ` Jonas Karlman
[not found] ` <20200106204914.6001-1-jonas@kwiboo.se>
2020-01-06 20:49 ` [PATCH 10/15] arm64: dts: rockchip: increase vop clock rate on rk3328 Jonas Karlman
2020-01-06 20:49 ` Jonas Karlman
2020-01-06 20:49 ` Jonas Karlman
2020-01-06 20:49 ` Jonas Karlman
2020-01-06 20:49 ` Jonas Karlman [this message]
2020-01-06 20:49 ` [PATCH 11/15] arm64: dts: rockchip: add vpll clock to hdmi node " Jonas Karlman
2020-01-06 20:49 ` Jonas Karlman
2020-01-06 20:49 ` Jonas Karlman
2020-01-06 20:49 ` [PATCH 12/15] ARM: dts: rockchip: add vpll clock to hdmi node on rk3228 Jonas Karlman
2020-01-06 20:49 ` Jonas Karlman
2020-01-06 20:49 ` Jonas Karlman
2020-01-06 20:49 ` Jonas Karlman
2020-01-06 20:50 ` [PATCH 13/15] drm/rockchip: dw-hdmi: limit tmds to 340mhz on rk3228/rk3328 Jonas Karlman
2020-01-06 20:50 ` Jonas Karlman
2020-01-06 20:50 ` Jonas Karlman
2020-01-06 20:50 ` Jonas Karlman
[not found] ` <20200106204951.6060-1-jonas@kwiboo.se>
2020-01-06 20:50 ` [PATCH 14/15] drm/rockchip: dw-hdmi: remove unused plat_data " Jonas Karlman
2020-01-06 20:50 ` Jonas Karlman
2020-01-06 20:50 ` Jonas Karlman
2020-01-06 20:50 ` Jonas Karlman
2020-01-06 20:50 ` [PATCH 15/15] phy/rockchip: inno-hdmi: Support more pre-pll configuration Jonas Karlman
2020-01-06 20:50 ` Jonas Karlman
2020-01-06 20:50 ` Jonas Karlman
2020-01-06 20:50 ` Jonas Karlman
2020-01-06 21:33 ` Heiko Stübner
2020-01-06 21:33 ` Heiko Stübner
2020-01-06 21:33 ` Heiko Stübner
2020-01-06 21:33 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=HE1PR06MB4011274027CCF289492C661BAC3C0@HE1PR06MB4011.eurprd06.prod.outlook.com \
--to=jonas@kwiboo.se \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=zhengyang@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.