All of lore.kernel.org
 help / color / mirror / Atom feed
From: Helge Deller <deller@gmx.de>
To: io-uring@vger.kernel.org, Jens Axboe <axboe@kernel.dk>,
	linux-parisc@vger.kernel.org,
	John David Anglin <dave.anglin@bell.net>
Subject: [PATCH v2] io_uring: Adjust mapping wrt architecture aliasing requirements
Date: Thu, 16 Feb 2023 09:09:38 +0100	[thread overview]
Message-ID: <Y+3kwh8BokobVl6o@p100> (raw)

Some architectures have memory cache aliasing requirements (e.g. parisc)
if memory is shared between userspace and kernel. This patch fixes the
kernel to return an aliased address when asked by userspace via mmap().

Signed-off-by: Helge Deller <deller@gmx.de>
---
v2: Do not allow to map to a user-provided addresss. This forces
programs to write portable code, as usually on x86 mapping to any
address will succeed, while it will fail for most provided address if
used on stricter architectures.

diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c
index 862e05e6691d..01fe7437a071 100644
--- a/io_uring/io_uring.c
+++ b/io_uring/io_uring.c
@@ -72,6 +72,7 @@
 #include <linux/io_uring.h>
 #include <linux/audit.h>
 #include <linux/security.h>
+#include <asm/shmparam.h>

 #define CREATE_TRACE_POINTS
 #include <trace/events/io_uring.h>
@@ -3059,6 +3060,54 @@ static __cold int io_uring_mmap(struct file *file, struct vm_area_struct *vma)
 	return remap_pfn_range(vma, vma->vm_start, pfn, sz, vma->vm_page_prot);
 }

+static unsigned long io_uring_mmu_get_unmapped_area(struct file *filp,
+			unsigned long addr, unsigned long len,
+			unsigned long pgoff, unsigned long flags)
+{
+	const unsigned long mmap_end = arch_get_mmap_end(addr, len, flags);
+	struct vm_unmapped_area_info info;
+	void *ptr;
+
+	/*
+	 * Do not allow to map to user-provided address to avoid breaking the
+	 * aliasing rules. Userspace is not able to guess the offset address of
+	 * kernel kmalloc()ed memory area.
+	 */
+	if (addr)
+		return -EINVAL;
+
+	ptr = io_uring_validate_mmap_request(filp, pgoff, len);
+	if (IS_ERR(ptr))
+		return -ENOMEM;
+
+	info.flags = VM_UNMAPPED_AREA_TOPDOWN;
+	info.length = len;
+	info.low_limit = max(PAGE_SIZE, mmap_min_addr);
+	info.high_limit = arch_get_mmap_base(addr, current->mm->mmap_base);
+#ifdef SHM_COLOUR
+	info.align_mask = PAGE_MASK & (SHM_COLOUR - 1UL);
+#else
+	info.align_mask = PAGE_MASK & (SHMLBA - 1UL);
+#endif
+	info.align_offset = (unsigned long) ptr;
+
+	/*
+	 * A failed mmap() very likely causes application failure,
+	 * so fall back to the bottom-up function here. This scenario
+	 * can happen with large stack limits and large mmap()
+	 * allocations.
+	 */
+	addr = vm_unmapped_area(&info);
+	if (offset_in_page(addr)) {
+		info.flags = 0;
+		info.low_limit = TASK_UNMAPPED_BASE;
+		info.high_limit = mmap_end;
+		addr = vm_unmapped_area(&info);
+	}
+
+	return addr;
+}
+
 #else /* !CONFIG_MMU */

 static int io_uring_mmap(struct file *file, struct vm_area_struct *vma)
@@ -3273,6 +3322,8 @@ static const struct file_operations io_uring_fops = {
 #ifndef CONFIG_MMU
 	.get_unmapped_area = io_uring_nommu_get_unmapped_area,
 	.mmap_capabilities = io_uring_nommu_mmap_capabilities,
+#else
+	.get_unmapped_area = io_uring_mmu_get_unmapped_area,
 #endif
 	.poll		= io_uring_poll,
 #ifdef CONFIG_PROC_FS

             reply	other threads:[~2023-02-16  8:09 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-16  8:09 Helge Deller [this message]
2023-02-16 16:11 ` [PATCH v2] io_uring: Adjust mapping wrt architecture aliasing requirements Jens Axboe
2023-02-16 16:33   ` Helge Deller
2023-02-16 16:46     ` Jens Axboe
2023-02-16 17:52       ` Helge Deller
2023-02-16 18:00         ` Jens Axboe
2023-06-27 14:14 ` Jiri Slaby
2023-06-27 19:24   ` Helge Deller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Y+3kwh8BokobVl6o@p100 \
    --to=deller@gmx.de \
    --cc=axboe@kernel.dk \
    --cc=dave.anglin@bell.net \
    --cc=io-uring@vger.kernel.org \
    --cc=linux-parisc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.