All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sakari Ailus <sakari.ailus@iki.fi>
To: linux-media@vger.kernel.org
Subject: [GIT PULL FOR 6.2] More camera sensor patches
Date: Mon, 14 Nov 2022 11:26:26 +0200	[thread overview]
Message-ID: <Y3IJwomIow2+vdMh@valkosipuli.retiisi.eu> (raw)

Hi Mauro,

Here's another pile of camera sensor patches for 6.2.

Besides the usual fixes and cleanups, there are lots of improvements for
the ov9282, ov5645 and sun6i-csi drivers, sun6i ISP (staging) driver as
well as new compatible string for imx412 driver for imx577.

Please pull.


The following changes since commit f0c4d9fc9cc9462659728d168387191387e903cc:

  Linux 6.1-rc4 (2022-11-06 15:07:11 -0800)

are available in the Git repository at:

  git://linuxtv.org/sailus/media_tree.git tags/for-6.2-2-signed

for you to fetch changes up to f732359a339f517a47df4fb9e48df35c28440a0e:

  media: sun6i-csi: Add support for hooking to the isp devices (2022-11-11 12:21:36 +0200)

----------------------------------------------------------------
Andy Shevchenko (2):
      media: subdev: Replace custom implementation of device_match_fwnode()
      staging: media: tegra-video: Replace custom implementation of device_match_fwnode()

Bryan O'Donoghue (3):
      media: dt-bindings: imx412: Extend compatible strings
      media: i2c: imx412: Assign v4l2 device subname based on compat string
      media: i2c: imx412: Add new compatible strings

Dave Stevenson (16):
      media: i2c: ov9282: Remove duplication of registers
      media: i2c: ov9282: Split registers into common and mode specific
      media: i2c: ov9282: Remove format code from the mode
      media: i2c: ov9282: Remove pixel rate from mode definition
      media: i2c: ov9282: Support more than 1 mode.
      media: i2c: ov9282: Correct HTS register for configured pixel rate
      media: i2c: ov9282: Reduce vblank_min values based on testing
      media: i2c: ov9282: Add selection for CSI2 clock mode
      media: i2c: ov9282: Add the properties from fwnode
      media: i2c: ov9282: Action CID_VBLANK when set.
      media: i2c: ov9282: Add HFLIP and VFLIP support
      media: i2c: ov9282: Make V4L2_CID_HBLANK r/w
      media: i2c: ov9282: Add selection API calls for cropping info
      media: i2c: ov9282: Add support for 1280x800 and 640x400 modes
      media: i2c: ov9282: Add support for 8bit readout
      media: i2c: ov9282: Support event handlers

Lad Prabhakar (8):
      ARM: dts: imx6qdl-pico: Drop clock-names property
      ARM: dts: imx6qdl-wandboard: Drop clock-names property
      arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Drop clock-names property
      media: dt-bindings: ov5645: Convert OV5645 binding to a schema
      media: i2c: ov5645: Use runtime PM
      media: i2c: ov5645: Drop empty comment
      media: i2c: ov5645: Make sure to call PM functions
      media: i2c: ov5645: Call ov5645_entity_init_cfg() before registering the subdev

Paul Kocialkowski (33):
      media: sun6i-csi: Add bridge v4l2 subdev with port management
      media: sun6i-csi: Rename sun6i_video to sun6i_csi_capture
      media: sun6i-csi: Add capture state using vsync for page flip
      media: sun6i-csi: Rework register definitions, invert misleading fields
      media: sun6i-csi: Add dimensions and format helpers to capture
      media: sun6i-csi: Implement address configuration without indirection
      media: sun6i-csi: Split stream sequences and irq code in capture
      media: sun6i-csi: Move power management to runtime pm in capture
      media: sun6i-csi: Move register configuration to capture
      media: sun6i-csi: Rework capture format management with helper
      media: sun6i-csi: Remove custom format helper and rework configure
      media: sun6i-csi: Add bridge dimensions and format helpers
      media: sun6i-csi: Get mbus code from bridge instead of storing it
      media: sun6i-csi: Tidy capture configure code
      media: sun6i-csi: Introduce bridge format structure, list and helper
      media: sun6i-csi: Introduce capture format structure, list and helper
      media: sun6i-csi: Configure registers from format tables
      media: sun6i-csi: Implement capture link validation with logic
      media: sun6i-csi: Get bridge subdev directly in capture stream ops
      media: sun6i-csi: Move hardware control to the bridge
      media: sun6i-csi: Rename the capture video device to sun6i-csi-capture
      media: sun6i-csi: Cleanup headers and includes, update copyright lines
      media: sun6i-csi: Add support for MIPI CSI-2 to the bridge code
      media: sun6i-csi: Only configure capture when streaming
      media: sun6i-csi: Add extra checks to the interrupt routine
      media: sun6i-csi: Request a shared interrupt
      MAINTAINERS: Add myself as sun6i-csi maintainer and rename/move entry
      dt-bindings: media: Add Allwinner A31 ISP bindings documentation
      dt-bindings: media: sun6i-a31-csi: Add internal output port to the ISP
      staging: media: Add support for the Allwinner A31 ISP
      MAINTAINERS: Add entry for the Allwinner A31 ISP driver
      media: sun6i-csi: Detect the availability of the ISP
      media: sun6i-csi: Add support for hooking to the isp devices

 .../bindings/media/allwinner,sun6i-a31-csi.yaml    |    4 +
 .../bindings/media/allwinner,sun6i-a31-isp.yaml    |  101 ++
 .../devicetree/bindings/media/i2c/ov5645.txt       |   54 -
 .../devicetree/bindings/media/i2c/ovti,ov5645.yaml |  104 ++
 .../devicetree/bindings/media/i2c/sony,imx412.yaml |    4 +-
 MAINTAINERS                                        |   26 +-
 arch/arm/boot/dts/imx6qdl-pico.dtsi                |    1 -
 arch/arm/boot/dts/imx6qdl-wandboard.dtsi           |    1 -
 .../dts/renesas/aistarvision-mipi-adapter-2.1.dtsi |    1 -
 drivers/media/i2c/imx412.c                         |    9 +-
 drivers/media/i2c/ov5645.c                         |  146 +--
 drivers/media/i2c/ov9282.c                         |  562 ++++++++--
 drivers/media/platform/sunxi/sun6i-csi/Makefile    |    2 +-
 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c |  778 ++------------
 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h |  145 +--
 .../platform/sunxi/sun6i-csi/sun6i_csi_bridge.c    |  868 +++++++++++++++
 .../platform/sunxi/sun6i-csi/sun6i_csi_bridge.h    |   69 ++
 .../platform/sunxi/sun6i-csi/sun6i_csi_capture.c   | 1102 ++++++++++++++++++++
 .../platform/sunxi/sun6i-csi/sun6i_csi_capture.h   |   89 ++
 .../media/platform/sunxi/sun6i-csi/sun6i_csi_reg.h |  362 ++++---
 .../media/platform/sunxi/sun6i-csi/sun6i_video.c   |  733 -------------
 .../media/platform/sunxi/sun6i-csi/sun6i_video.h   |   35 -
 drivers/media/v4l2-core/v4l2-subdev.c              |    2 +-
 drivers/staging/media/sunxi/Kconfig                |    1 +
 drivers/staging/media/sunxi/Makefile               |    1 +
 drivers/staging/media/sunxi/sun6i-isp/Kconfig      |   15 +
 drivers/staging/media/sunxi/sun6i-isp/Makefile     |    4 +
 drivers/staging/media/sunxi/sun6i-isp/TODO.txt     |    6 +
 drivers/staging/media/sunxi/sun6i-isp/sun6i_isp.c  |  555 ++++++++++
 drivers/staging/media/sunxi/sun6i-isp/sun6i_isp.h  |   90 ++
 .../media/sunxi/sun6i-isp/sun6i_isp_capture.c      |  742 +++++++++++++
 .../media/sunxi/sun6i-isp/sun6i_isp_capture.h      |   78 ++
 .../media/sunxi/sun6i-isp/sun6i_isp_params.c       |  566 ++++++++++
 .../media/sunxi/sun6i-isp/sun6i_isp_params.h       |   52 +
 .../staging/media/sunxi/sun6i-isp/sun6i_isp_proc.c |  577 ++++++++++
 .../staging/media/sunxi/sun6i-isp/sun6i_isp_proc.h |   66 ++
 .../staging/media/sunxi/sun6i-isp/sun6i_isp_reg.h  |  275 +++++
 .../media/sunxi/sun6i-isp/uapi/sun6i-isp-config.h  |   43 +
 drivers/staging/media/tegra-video/vi.c             |    2 +-
 39 files changed, 6259 insertions(+), 2012 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
 delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov5645.txt
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml
 create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_bridge.c
 create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_bridge.h
 create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_capture.c
 create mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_capture.h
 delete mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_video.c
 delete mode 100644 drivers/media/platform/sunxi/sun6i-csi/sun6i_video.h
 create mode 100644 drivers/staging/media/sunxi/sun6i-isp/Kconfig
 create mode 100644 drivers/staging/media/sunxi/sun6i-isp/Makefile
 create mode 100644 drivers/staging/media/sunxi/sun6i-isp/TODO.txt
 create mode 100644 drivers/staging/media/sunxi/sun6i-isp/sun6i_isp.c
 create mode 100644 drivers/staging/media/sunxi/sun6i-isp/sun6i_isp.h
 create mode 100644 drivers/staging/media/sunxi/sun6i-isp/sun6i_isp_capture.c
 create mode 100644 drivers/staging/media/sunxi/sun6i-isp/sun6i_isp_capture.h
 create mode 100644 drivers/staging/media/sunxi/sun6i-isp/sun6i_isp_params.c
 create mode 100644 drivers/staging/media/sunxi/sun6i-isp/sun6i_isp_params.h
 create mode 100644 drivers/staging/media/sunxi/sun6i-isp/sun6i_isp_proc.c
 create mode 100644 drivers/staging/media/sunxi/sun6i-isp/sun6i_isp_proc.h
 create mode 100644 drivers/staging/media/sunxi/sun6i-isp/sun6i_isp_reg.h
 create mode 100644 drivers/staging/media/sunxi/sun6i-isp/uapi/sun6i-isp-config.h

-- 
Kind regards,

Sakari Ailus

                 reply	other threads:[~2022-11-14  9:26 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Y3IJwomIow2+vdMh@valkosipuli.retiisi.eu \
    --to=sakari.ailus@iki.fi \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.