From: Zekun Shen <bruceshenzk@gmail.com>
To: bruceshenzk@gmail.com
Cc: Amitkumar Karwar <amitkarwar@gmail.com>,
Siva Rebbagondla <siva8118@gmail.com>,
Kalle Valo <kvalo@codeaurora.org>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, brendandg@nyu.edu
Subject: [PATCH] rsi_usb: Fix use-after-free in rsi_rx_done_handler
Date: Fri, 29 Oct 2021 15:49:03 -0400 [thread overview]
Message-ID: <YXxQL/vIiYcZUu/j@10-18-43-117.dynapool.wireless.nyu.edu> (raw)
When freeing rx_cb->rx_skb, the pointer is not set to NULL,
a later rsi_rx_done_handler call will try to read the freed
address.
This bug will very likley lead to double free, although
detected early as use-after-free bug.
The bug is triggerable with a compromised/malfunctional usb
device. After applying the patch, the same input no longer
triggers the use-after-free.
Attached is the kasan report from fuzzing.
BUG: KASAN: use-after-free in rsi_rx_done_handler+0x354/0x430 [rsi_usb]
Read of size 4 at addr ffff8880188e5930 by task modprobe/231
Call Trace:
<IRQ>
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x16/0x200
? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
__kasan_report.cold+0x37/0x7c
? dma_direct_unmap_page+0x90/0x110
? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
kasan_report+0xe/0x20
rsi_rx_done_handler+0x354/0x430 [rsi_usb]
__usb_hcd_giveback_urb+0x1e4/0x380
usb_giveback_urb_bh+0x241/0x4f0
? __usb_hcd_giveback_urb+0x380/0x380
? apic_timer_interrupt+0xa/0x20
tasklet_action_common.isra.0+0x135/0x330
__do_softirq+0x18c/0x634
? handle_irq_event+0xcd/0x157
? handle_edge_irq+0x1eb/0x7b0
irq_exit+0x114/0x140
do_IRQ+0x91/0x1e0
common_interrupt+0xf/0xf
</IRQ>
Reported-by: Zekun Shen <bruceshenzk@gmail.com>
Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
---
drivers/net/wireless/rsi/rsi_91x_usb.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c
index 416976f09..d9e9bf26e 100644
--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -272,8 +272,12 @@ static void rsi_rx_done_handler(struct urb *urb)
struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)rx_cb->data;
int status = -EINVAL;
+ if (!rx_cb->rx_skb)
+ return;
+
if (urb->status) {
dev_kfree_skb(rx_cb->rx_skb);
+ rx_cb->rx_skb = NULL;
return;
}
@@ -297,8 +301,10 @@ static void rsi_rx_done_handler(struct urb *urb)
if (rsi_rx_urb_submit(dev->priv, rx_cb->ep_num, GFP_ATOMIC))
rsi_dbg(ERR_ZONE, "%s: Failed in urb submission", __func__);
- if (status)
+ if (status) {
dev_kfree_skb(rx_cb->rx_skb);
+ rx_cb->rx_skb = NULL;
+ }
}
static void rsi_rx_urb_kill(struct rsi_hw *adapter, u8 ep_num)
--
2.25.1
next reply other threads:[~2021-10-29 19:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-29 19:49 Zekun Shen [this message]
2021-11-01 14:06 ` [PATCH] rsi_usb: Fix use-after-free in rsi_rx_done_handler Kalle Valo
2021-11-29 10:43 ` rsi: Fix use-after-free in rsi_rx_done_handler() Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YXxQL/vIiYcZUu/j@10-18-43-117.dynapool.wireless.nyu.edu \
--to=bruceshenzk@gmail.com \
--cc=amitkarwar@gmail.com \
--cc=brendandg@nyu.edu \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=siva8118@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.