All of lore.kernel.org
 help / color / mirror / Atom feed
From: Herbert Xu <herbert@gondor.apana.org.au>
To: Steffen Klassert <steffen.klassert@secunet.com>, netdev@vger.kernel.org
Subject: [PATCH] xfrm: Remove inner/outer modes from output path
Date: Fri, 10 Mar 2023 17:40:32 +0800	[thread overview]
Message-ID: <ZAr7EHeGkqVUr+z5@gondor.apana.org.au> (raw)

The inner/outer modes were added to abstract out common code that
were once duplicated between IPv4 and IPv6.  As time went on the
abstractions have been removed and we are now left with empty
shells that only contain duplicate information.  These can be
removed one-by-one as the same information is already present
elsewhere in the xfrm_state object.

Just like the input-side, removing this from the output code
makes it possible to use transport-mode SAs underneath an
inter-family tunnel mode SA.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index ff114d68cc43..369e5de8558f 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -412,7 +412,7 @@ static int xfrm4_prepare_output(struct xfrm_state *x, struct sk_buff *skb)
 	IPCB(skb)->flags |= IPSKB_XFRM_TUNNEL_SIZE;
 	skb->protocol = htons(ETH_P_IP);
 
-	switch (x->outer_mode.encap) {
+	switch (x->props.mode) {
 	case XFRM_MODE_BEET:
 		return xfrm4_beet_encap_add(x, skb);
 	case XFRM_MODE_TUNNEL:
@@ -435,7 +435,7 @@ static int xfrm6_prepare_output(struct xfrm_state *x, struct sk_buff *skb)
 	skb->ignore_df = 1;
 	skb->protocol = htons(ETH_P_IPV6);
 
-	switch (x->outer_mode.encap) {
+	switch (x->props.mode) {
 	case XFRM_MODE_BEET:
 		return xfrm6_beet_encap_add(x, skb);
 	case XFRM_MODE_TUNNEL:
@@ -451,22 +451,22 @@ static int xfrm6_prepare_output(struct xfrm_state *x, struct sk_buff *skb)
 
 static int xfrm_outer_mode_output(struct xfrm_state *x, struct sk_buff *skb)
 {
-	switch (x->outer_mode.encap) {
+	switch (x->props.mode) {
 	case XFRM_MODE_BEET:
 	case XFRM_MODE_TUNNEL:
-		if (x->outer_mode.family == AF_INET)
+		if (x->props.family == AF_INET)
 			return xfrm4_prepare_output(x, skb);
-		if (x->outer_mode.family == AF_INET6)
+		if (x->props.family == AF_INET6)
 			return xfrm6_prepare_output(x, skb);
 		break;
 	case XFRM_MODE_TRANSPORT:
-		if (x->outer_mode.family == AF_INET)
+		if (x->props.family == AF_INET)
 			return xfrm4_transport_output(x, skb);
-		if (x->outer_mode.family == AF_INET6)
+		if (x->props.family == AF_INET6)
 			return xfrm6_transport_output(x, skb);
 		break;
 	case XFRM_MODE_ROUTEOPTIMIZATION:
-		if (x->outer_mode.family == AF_INET6)
+		if (x->props.family == AF_INET6)
 			return xfrm6_ro_output(x, skb);
 		WARN_ON_ONCE(1);
 		break;
@@ -875,21 +875,10 @@ static int xfrm6_extract_output(struct xfrm_state *x, struct sk_buff *skb)
 
 static int xfrm_inner_extract_output(struct xfrm_state *x, struct sk_buff *skb)
 {
-	const struct xfrm_mode *inner_mode;
-
-	if (x->sel.family == AF_UNSPEC)
-		inner_mode = xfrm_ip2inner_mode(x,
-				xfrm_af2proto(skb_dst(skb)->ops->family));
-	else
-		inner_mode = &x->inner_mode;
-
-	if (inner_mode == NULL)
-		return -EAFNOSUPPORT;
-
-	switch (inner_mode->family) {
-	case AF_INET:
+	switch (skb->protocol) {
+	case htons(ETH_P_IP):
 		return xfrm4_extract_output(x, skb);
-	case AF_INET6:
+	case htons(ETH_P_IPV6):
 		return xfrm6_extract_output(x, skb);
 	}
 
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt

             reply	other threads:[~2023-03-10  9:41 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-10  9:40 Herbert Xu [this message]
2023-03-15 11:06 ` [PATCH] xfrm: Remove inner/outer modes from output path Steffen Klassert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZAr7EHeGkqVUr+z5@gondor.apana.org.au \
    --to=herbert@gondor.apana.org.au \
    --cc=netdev@vger.kernel.org \
    --cc=steffen.klassert@secunet.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.