All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Geoffrey D. Bennett" <g@b4.vu>
To: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Subject: [PATCH] ALSA: scarlett2: Add Focusrite Clarett+ 2Pre and 4Pre support
Date: Wed, 27 Sep 2023 01:11:30 +0930	[thread overview]
Message-ID: <ZRL7qjC3tYQllT3H@m.b4.vu> (raw)

The Focusrite Clarett+ series uses the same protocol as the Scarlett
Gen 2 and Gen 3 series. This patch adds support for the Clarett+ 2Pre
and Clarett+ 4Pre similarly to the existing 8Pre support by adding
appropriate entries to the scarlett2 driver.

The Clarett 2Pre USB and 4Pre USB presumably use the same protocol as
well, so support for them can easily be added if someone can test.

Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
---
 sound/usb/mixer_quirks.c        |  2 +
 sound/usb/mixer_scarlett_gen2.c | 97 ++++++++++++++++++++++++++++++++-
 2 files changed, 98 insertions(+), 1 deletion(-)

diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 9911859d2750..0db94ead1b93 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -3421,6 +3421,8 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
 	case USB_ID(0x1235, 0x8214): /* Focusrite Scarlett 18i8 3rd Gen */
 	case USB_ID(0x1235, 0x8215): /* Focusrite Scarlett 18i20 3rd Gen */
 	case USB_ID(0x1235, 0x8208): /* Focusrite Clarett 8Pre USB */
+	case USB_ID(0x1235, 0x820a): /* Focusrite Clarett+ 2Pre */
+	case USB_ID(0x1235, 0x820b): /* Focusrite Clarett+ 4Pre */
 	case USB_ID(0x1235, 0x820c): /* Focusrite Clarett+ 8Pre */
 		err = snd_scarlett_gen2_init(mixer);
 		break;
diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c
index 481a80e160de..57e7fdff6905 100644
--- a/sound/usb/mixer_scarlett_gen2.c
+++ b/sound/usb/mixer_scarlett_gen2.c
@@ -6,7 +6,7 @@
  *   - 6i6/18i8/18i20 Gen 2
  *   - Solo/2i2/4i4/8i6/18i8/18i20 Gen 3
  *   - Clarett 8Pre USB
- *   - Clarett+ 8Pre
+ *   - Clarett+ 2Pre/4Pre/8Pre
  *
  *   Copyright (c) 2018-2023 by Geoffrey D. Bennett <g at b4.vu>
  *   Copyright (c) 2020-2021 by Vladimir Sadovnikov <sadko4u@gmail.com>
@@ -60,6 +60,10 @@
  * Support for Clarett USB 8Pre added in Sep 2023 (thanks to Philippe
  * Perrot for confirmation).
  *
+ * Support for Clarett+ 4Pre and 2Pre added in Sep 2023 (thanks to
+ * Gregory Rozzo for donating a 4Pre, and David Sherwood and Patrice
+ * Peterson for usbmon output).
+ *
  * This ALSA mixer gives access to (model-dependent):
  *  - input, output, mixer-matrix muxes
  *  - mixer-matrix gain stages
@@ -832,6 +836,95 @@ static const struct scarlett2_device_info s18i20_gen3_info = {
 	} },
 };
 
+static const struct scarlett2_device_info clarett_2pre_info = {
+	.config_set = SCARLETT2_CONFIG_SET_CLARETT,
+	.line_out_hw_vol = 1,
+	.level_input_count = 2,
+	.air_input_count = 2,
+
+	.line_out_descrs = {
+		"Monitor L",
+		"Monitor R",
+		"Headphones L",
+		"Headphones R",
+	},
+
+	.port_count = {
+		[SCARLETT2_PORT_TYPE_NONE]     = {  1,  0 },
+		[SCARLETT2_PORT_TYPE_ANALOGUE] = {  2,  4 },
+		[SCARLETT2_PORT_TYPE_SPDIF]    = {  2,  0 },
+		[SCARLETT2_PORT_TYPE_ADAT]     = {  8,  0 },
+		[SCARLETT2_PORT_TYPE_MIX]      = { 10, 18 },
+		[SCARLETT2_PORT_TYPE_PCM]      = {  4, 12 },
+	},
+
+	.mux_assignment = { {
+		{ SCARLETT2_PORT_TYPE_PCM,      0, 12 },
+		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  4 },
+		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 },
+		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 },
+		{ 0,                            0,  0 },
+	}, {
+		{ SCARLETT2_PORT_TYPE_PCM,      0,  8 },
+		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  4 },
+		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 },
+		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 },
+		{ 0,                            0,  0 },
+	}, {
+		{ SCARLETT2_PORT_TYPE_PCM,      0,  2 },
+		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  4 },
+		{ SCARLETT2_PORT_TYPE_NONE,     0, 26 },
+		{ 0,                            0,  0 },
+	} },
+};
+
+static const struct scarlett2_device_info clarett_4pre_info = {
+	.config_set = SCARLETT2_CONFIG_SET_CLARETT,
+	.line_out_hw_vol = 1,
+	.level_input_count = 2,
+	.air_input_count = 4,
+
+	.line_out_descrs = {
+		"Monitor L",
+		"Monitor R",
+		"Headphones 1 L",
+		"Headphones 1 R",
+		"Headphones 2 L",
+		"Headphones 2 R",
+	},
+
+	.port_count = {
+		[SCARLETT2_PORT_TYPE_NONE]     = {  1,  0 },
+		[SCARLETT2_PORT_TYPE_ANALOGUE] = {  8,  6 },
+		[SCARLETT2_PORT_TYPE_SPDIF]    = {  2,  2 },
+		[SCARLETT2_PORT_TYPE_ADAT]     = {  8,  0 },
+		[SCARLETT2_PORT_TYPE_MIX]      = { 10, 18 },
+		[SCARLETT2_PORT_TYPE_PCM]      = {  8, 18 },
+	},
+
+	.mux_assignment = { {
+		{ SCARLETT2_PORT_TYPE_PCM,      0, 18 },
+		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  6 },
+		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 },
+		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 },
+		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 },
+		{ 0,                            0,  0 },
+	}, {
+		{ SCARLETT2_PORT_TYPE_PCM,      0, 14 },
+		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  6 },
+		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 },
+		{ SCARLETT2_PORT_TYPE_MIX,      0, 18 },
+		{ SCARLETT2_PORT_TYPE_NONE,     0,  8 },
+		{ 0,                            0,  0 },
+	}, {
+		{ SCARLETT2_PORT_TYPE_PCM,      0, 12 },
+		{ SCARLETT2_PORT_TYPE_ANALOGUE, 0,  6 },
+		{ SCARLETT2_PORT_TYPE_SPDIF,    0,  2 },
+		{ SCARLETT2_PORT_TYPE_NONE,     0, 24 },
+		{ 0,                            0,  0 },
+	} },
+};
+
 static const struct scarlett2_device_info clarett_8pre_info = {
 	.config_set = SCARLETT2_CONFIG_SET_CLARETT,
 	.line_out_hw_vol = 1,
@@ -907,6 +1000,8 @@ static const struct scarlett2_device_entry scarlett2_devices[] = {
 
 	/* Supported Clarett USB/Clarett+ devices */
 	{ USB_ID(0x1235, 0x8208), &clarett_8pre_info, "Clarett USB" },
+	{ USB_ID(0x1235, 0x820a), &clarett_2pre_info, "Clarett+" },
+	{ USB_ID(0x1235, 0x820b), &clarett_4pre_info, "Clarett+" },
 	{ USB_ID(0x1235, 0x820c), &clarett_8pre_info, "Clarett+" },
 
 	/* End of list */
-- 
2.41.0


             reply	other threads:[~2023-09-26 15:43 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-26 15:41 Geoffrey D. Bennett [this message]
2023-10-06  8:46 ` [PATCH] ALSA: scarlett2: Add Focusrite Clarett+ 2Pre and 4Pre support Takashi Iwai
2023-10-07 11:28   ` Geoffrey D. Bennett

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZRL7qjC3tYQllT3H@m.b4.vu \
    --to=g@b4.vu \
    --cc=alsa-devel@alsa-project.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.