From: Jyri Sarha <jsarha@ti.com> To: linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org, alsa-devel@alsa-project.org, dri-devel@lists.freedesktop.org, broonie@kernel.org Cc: peter.ujfalusi@ti.com, detheridge@ti.com, Jyri Sarha <jsarha@ti.com> Subject: [PATCH RFC v3 5/8] ASoC: davinci: HDMI audio build for AM33XX and TDA998x Date: Mon, 27 Jan 2014 17:37:54 +0200 [thread overview] Message-ID: <a8dae5e15c2794d0bcbca2b43cede66c4a696ac0.1390836773.git.jsarha@ti.com> (raw) In-Reply-To: <cover.1390836773.git.jsarha@ti.com> Adds configuration option for HDMI audio support for AM33XX based boards with NXP TDA998x HDMI transmitter. The audio is connected to NXP TDA998x trough McASP running in i2s mode. Signed-off-by: Jyri Sarha <jsarha@ti.com> --- sound/soc/davinci/Kconfig | 12 ++++++++++++ sound/soc/davinci/Makefile | 1 + 2 files changed, 13 insertions(+) diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig index a8ec1fc..40dd5d1 100644 --- a/sound/soc/davinci/Kconfig +++ b/sound/soc/davinci/Kconfig @@ -26,6 +26,18 @@ config SND_AM33XX_SOC_EVM AM335X-EVMSK, and BeagelBone with AudioCape boards have this setup. +config SND_AM335X_SOC_NXPTDA_EVM + tristate "HDMI Audio for the AM33XX chip based boards with TDA998x" + depends on SND_DAVINCI_SOC && SOC_AM33XX + depends on DRM_TILCDC && DRM_I2C_NXP_TDA998X + select SND_SOC_HDMI_CODEC + select SND_DAVINCI_SOC_MCASP + help + Say Y or M if you want to add support for HDMI SoC audio on + AM33XX boards with NXP TDA998x HDMI transmitter. For example + BeagleBoneBack. The audio is connected to NXP TDA998x trough + McASP running in i2s mode. + config SND_DAVINCI_SOC_EVM tristate "SoC Audio support for DaVinci DM6446, DM355 or DM365 EVM" depends on SND_DAVINCI_SOC diff --git a/sound/soc/davinci/Makefile b/sound/soc/davinci/Makefile index 744d4d9..7587a70 100644 --- a/sound/soc/davinci/Makefile +++ b/sound/soc/davinci/Makefile @@ -13,3 +13,4 @@ obj-$(CONFIG_SND_DAVINCI_SOC_VCIF) += snd-soc-davinci-vcif.o snd-soc-evm-objs := davinci-evm.o obj-$(CONFIG_SND_DAVINCI_SOC_GENERIC_EVM) += snd-soc-evm.o +obj-$(CONFIG_SND_AM335X_SOC_NXPTDA_EVM) += snd-soc-evm.o -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: jsarha@ti.com (Jyri Sarha) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH RFC v3 5/8] ASoC: davinci: HDMI audio build for AM33XX and TDA998x Date: Mon, 27 Jan 2014 17:37:54 +0200 [thread overview] Message-ID: <a8dae5e15c2794d0bcbca2b43cede66c4a696ac0.1390836773.git.jsarha@ti.com> (raw) In-Reply-To: <cover.1390836773.git.jsarha@ti.com> Adds configuration option for HDMI audio support for AM33XX based boards with NXP TDA998x HDMI transmitter. The audio is connected to NXP TDA998x trough McASP running in i2s mode. Signed-off-by: Jyri Sarha <jsarha@ti.com> --- sound/soc/davinci/Kconfig | 12 ++++++++++++ sound/soc/davinci/Makefile | 1 + 2 files changed, 13 insertions(+) diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig index a8ec1fc..40dd5d1 100644 --- a/sound/soc/davinci/Kconfig +++ b/sound/soc/davinci/Kconfig @@ -26,6 +26,18 @@ config SND_AM33XX_SOC_EVM AM335X-EVMSK, and BeagelBone with AudioCape boards have this setup. +config SND_AM335X_SOC_NXPTDA_EVM + tristate "HDMI Audio for the AM33XX chip based boards with TDA998x" + depends on SND_DAVINCI_SOC && SOC_AM33XX + depends on DRM_TILCDC && DRM_I2C_NXP_TDA998X + select SND_SOC_HDMI_CODEC + select SND_DAVINCI_SOC_MCASP + help + Say Y or M if you want to add support for HDMI SoC audio on + AM33XX boards with NXP TDA998x HDMI transmitter. For example + BeagleBoneBack. The audio is connected to NXP TDA998x trough + McASP running in i2s mode. + config SND_DAVINCI_SOC_EVM tristate "SoC Audio support for DaVinci DM6446, DM355 or DM365 EVM" depends on SND_DAVINCI_SOC diff --git a/sound/soc/davinci/Makefile b/sound/soc/davinci/Makefile index 744d4d9..7587a70 100644 --- a/sound/soc/davinci/Makefile +++ b/sound/soc/davinci/Makefile @@ -13,3 +13,4 @@ obj-$(CONFIG_SND_DAVINCI_SOC_VCIF) += snd-soc-davinci-vcif.o snd-soc-evm-objs := davinci-evm.o obj-$(CONFIG_SND_DAVINCI_SOC_GENERIC_EVM) += snd-soc-evm.o +obj-$(CONFIG_SND_AM335X_SOC_NXPTDA_EVM) += snd-soc-evm.o -- 1.7.9.5
next prev parent reply other threads:[~2014-01-27 15:38 UTC|newest] Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-01-27 15:37 [PATCH RFC v3 0/8] Beaglebone-Black HDMI audio Jyri Sarha 2014-01-27 15:37 ` Jyri Sarha 2014-01-27 15:37 ` [PATCH RFC v3 1/8] clk: add gpio controlled clock Jyri Sarha 2014-01-27 15:37 ` Jyri Sarha 2014-01-27 15:37 ` [PATCH RFC v3 2/8] ASoC: davinci-evm: Add named clock reference to DT bindings Jyri Sarha 2014-01-27 15:37 ` Jyri Sarha 2014-01-27 18:10 ` Mark Brown 2014-01-27 18:10 ` Mark Brown 2014-01-27 15:37 ` [PATCH RFC v3 3/8] ASoC: davinci-mcasp: Set BCLK divider if McASP is BCLK master Jyri Sarha 2014-01-27 15:37 ` Jyri Sarha 2014-01-27 20:46 ` Mark Brown 2014-01-27 20:46 ` Mark Brown 2014-01-27 15:37 ` [PATCH RFC v3 4/8] ASoC: davinci-evm: HDMI audio support for TDA998x trough McASP I2S bus Jyri Sarha 2014-01-27 15:37 ` Jyri Sarha 2014-01-27 20:49 ` Mark Brown 2014-01-27 20:49 ` Mark Brown 2014-01-28 7:47 ` Jyri Sarha 2014-01-28 7:47 ` Jyri Sarha 2014-01-27 15:37 ` Jyri Sarha [this message] 2014-01-27 15:37 ` [PATCH RFC v3 5/8] ASoC: davinci: HDMI audio build for AM33XX and TDA998x Jyri Sarha 2014-01-27 15:37 ` [PATCH RFC v3 6/8] drm/tilcdc: Add I2C HDMI audio config for tda998x Jyri Sarha 2014-01-27 15:37 ` Jyri Sarha 2014-01-27 15:37 ` [PATCH RFC v3 7/8] ARM: OMAP2+: omap2plus_defconfig: Enable tilcdc and TDA998X HDMI support Jyri Sarha 2014-01-27 15:37 ` Jyri Sarha 2014-01-27 15:37 ` [PATCH RFC v3 8/8] ARM: OMAP2+: omap2plus_defconfig: Enable BeagleBone Black HDMI audio support Jyri Sarha 2014-01-27 15:37 ` Jyri Sarha 2014-01-27 15:51 ` [PATCH RFC v3 0/8] Beaglebone-Black HDMI audio Lars-Peter Clausen 2014-01-27 15:51 ` [alsa-devel] " Lars-Peter Clausen 2014-01-27 16:17 ` Jyri Sarha 2014-01-27 16:17 ` [alsa-devel] " Jyri Sarha 2014-01-27 16:32 ` Lars-Peter Clausen 2014-01-27 16:32 ` Lars-Peter Clausen 2014-01-27 19:40 ` Jyri Sarha 2014-01-27 19:40 ` [alsa-devel] " Jyri Sarha 2014-01-27 19:47 ` Lars-Peter Clausen 2014-01-27 19:47 ` Lars-Peter Clausen 2014-01-27 18:06 ` Jean-Francois Moine 2014-01-27 18:06 ` Jean-Francois Moine 2014-01-27 19:31 ` Jyri Sarha 2014-01-27 19:31 ` [alsa-devel] " Jyri Sarha 2014-01-28 9:23 ` Jean-Francois Moine 2014-01-28 9:23 ` Jean-Francois Moine 2014-01-30 12:20 ` Jyri Sarha 2014-01-30 12:20 ` [alsa-devel] " Jyri Sarha 2014-01-30 18:00 ` Jean-Francois Moine 2014-01-30 18:00 ` Jean-Francois Moine
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=a8dae5e15c2794d0bcbca2b43cede66c4a696ac0.1390836773.git.jsarha@ti.com \ --to=jsarha@ti.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=detheridge@ti.com \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=peter.ujfalusi@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.