From: Heiner Kallweit <hkallweit1@gmail.com>
To: "Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski@canonical.com>,
"Andreas Färber" <afaerber@suse.de>,
"Miguel Ojeda" <ojeda@kernel.org>
Cc: "linux-spi@vger.kernel.org" <linux-spi@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"open list:ARM/Amlogic Meson..."
<linux-amlogic@lists.infradead.org>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Kevin Hilman <khilman@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v4 5/6] arm64: dts: meson-gxl-s905w-tx3-mini: add support for the 7 segment display
Date: Thu, 24 Feb 2022 21:10:30 +0100 [thread overview]
Message-ID: <a9db41fc-3409-7a5f-00b1-e9619b80ca5e@gmail.com> (raw)
In-Reply-To: <f911c7d3-a9c4-32ee-68a1-e30b478732c9@gmail.com>
This patch adds support for the 7 segment display of the device.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
.../dts/amlogic/meson-gxl-s905w-tx3-mini.dts | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
index 6705c2082..20bbd931e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
@@ -10,6 +10,7 @@
#include "meson-gxl-s905x.dtsi"
#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/leds/common.h>
/ {
compatible = "oranth,tx3-mini", "amlogic,s905w", "amlogic,meson-gxl";
@@ -19,6 +20,64 @@ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>; /* 1 GiB or 2 GiB */
};
+
+ spi {
+ compatible = "spi-gpio";
+ sck-gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tm1628: led-controller@0 {
+ compatible = "titanmec,tm1628";
+ reg = <0>;
+ spi-3wire;
+ spi-lsb-first;
+ spi-rx-delay-us = <1>;
+ spi-max-frequency = <500000>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ segment-mapping = /bits/ 8 <4 5 6 1 2 3 7>;
+ grid = /bits/ 8 <4 3 2 1>;
+
+ alarm@5,1 {
+ reg = <5 1>;
+ function = LED_FUNCTION_ALARM;
+ };
+
+ usb@5,2 {
+ reg = <5 2>;
+ function = LED_FUNCTION_USB;
+ };
+ play@5,3 {
+ reg = <5 3>;
+ function = "play";
+ };
+
+ pause@5,4 {
+ reg = <5 4>;
+ function = "pause";
+ };
+
+ colon@5,5 {
+ reg = <5 5>;
+ function = "colon";
+ };
+
+ lan@5,6 {
+ reg = <5 6>;
+ function = LED_FUNCTION_LAN;
+ };
+
+ wlan@5,7 {
+ reg = <5 7>;
+ function = LED_FUNCTION_WLAN;
+ };
+ };
+ };
};
&ir {
--
2.35.1
WARNING: multiple messages have this Message-ID (diff)
From: Heiner Kallweit <hkallweit1@gmail.com>
To: "Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski@canonical.com>,
"Andreas Färber" <afaerber@suse.de>,
"Miguel Ojeda" <ojeda@kernel.org>
Cc: "linux-spi@vger.kernel.org" <linux-spi@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"open list:ARM/Amlogic Meson..."
<linux-amlogic@lists.infradead.org>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Kevin Hilman <khilman@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v4 5/6] arm64: dts: meson-gxl-s905w-tx3-mini: add support for the 7 segment display
Date: Thu, 24 Feb 2022 21:10:30 +0100 [thread overview]
Message-ID: <a9db41fc-3409-7a5f-00b1-e9619b80ca5e@gmail.com> (raw)
In-Reply-To: <f911c7d3-a9c4-32ee-68a1-e30b478732c9@gmail.com>
This patch adds support for the 7 segment display of the device.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
.../dts/amlogic/meson-gxl-s905w-tx3-mini.dts | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
index 6705c2082..20bbd931e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
@@ -10,6 +10,7 @@
#include "meson-gxl-s905x.dtsi"
#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/leds/common.h>
/ {
compatible = "oranth,tx3-mini", "amlogic,s905w", "amlogic,meson-gxl";
@@ -19,6 +20,64 @@ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>; /* 1 GiB or 2 GiB */
};
+
+ spi {
+ compatible = "spi-gpio";
+ sck-gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tm1628: led-controller@0 {
+ compatible = "titanmec,tm1628";
+ reg = <0>;
+ spi-3wire;
+ spi-lsb-first;
+ spi-rx-delay-us = <1>;
+ spi-max-frequency = <500000>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ segment-mapping = /bits/ 8 <4 5 6 1 2 3 7>;
+ grid = /bits/ 8 <4 3 2 1>;
+
+ alarm@5,1 {
+ reg = <5 1>;
+ function = LED_FUNCTION_ALARM;
+ };
+
+ usb@5,2 {
+ reg = <5 2>;
+ function = LED_FUNCTION_USB;
+ };
+ play@5,3 {
+ reg = <5 3>;
+ function = "play";
+ };
+
+ pause@5,4 {
+ reg = <5 4>;
+ function = "pause";
+ };
+
+ colon@5,5 {
+ reg = <5 5>;
+ function = "colon";
+ };
+
+ lan@5,6 {
+ reg = <5 6>;
+ function = LED_FUNCTION_LAN;
+ };
+
+ wlan@5,7 {
+ reg = <5 7>;
+ function = LED_FUNCTION_WLAN;
+ };
+ };
+ };
};
&ir {
--
2.35.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Heiner Kallweit <hkallweit1@gmail.com>
To: "Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski@canonical.com>,
"Andreas Färber" <afaerber@suse.de>,
"Miguel Ojeda" <ojeda@kernel.org>
Cc: "linux-spi@vger.kernel.org" <linux-spi@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"open list:ARM/Amlogic Meson..."
<linux-amlogic@lists.infradead.org>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Kevin Hilman <khilman@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v4 5/6] arm64: dts: meson-gxl-s905w-tx3-mini: add support for the 7 segment display
Date: Thu, 24 Feb 2022 21:10:30 +0100 [thread overview]
Message-ID: <a9db41fc-3409-7a5f-00b1-e9619b80ca5e@gmail.com> (raw)
In-Reply-To: <f911c7d3-a9c4-32ee-68a1-e30b478732c9@gmail.com>
This patch adds support for the 7 segment display of the device.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
.../dts/amlogic/meson-gxl-s905w-tx3-mini.dts | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
index 6705c2082..20bbd931e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
@@ -10,6 +10,7 @@
#include "meson-gxl-s905x.dtsi"
#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/leds/common.h>
/ {
compatible = "oranth,tx3-mini", "amlogic,s905w", "amlogic,meson-gxl";
@@ -19,6 +20,64 @@ memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>; /* 1 GiB or 2 GiB */
};
+
+ spi {
+ compatible = "spi-gpio";
+ sck-gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tm1628: led-controller@0 {
+ compatible = "titanmec,tm1628";
+ reg = <0>;
+ spi-3wire;
+ spi-lsb-first;
+ spi-rx-delay-us = <1>;
+ spi-max-frequency = <500000>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ segment-mapping = /bits/ 8 <4 5 6 1 2 3 7>;
+ grid = /bits/ 8 <4 3 2 1>;
+
+ alarm@5,1 {
+ reg = <5 1>;
+ function = LED_FUNCTION_ALARM;
+ };
+
+ usb@5,2 {
+ reg = <5 2>;
+ function = LED_FUNCTION_USB;
+ };
+ play@5,3 {
+ reg = <5 3>;
+ function = "play";
+ };
+
+ pause@5,4 {
+ reg = <5 4>;
+ function = "pause";
+ };
+
+ colon@5,5 {
+ reg = <5 5>;
+ function = "colon";
+ };
+
+ lan@5,6 {
+ reg = <5 6>;
+ function = LED_FUNCTION_LAN;
+ };
+
+ wlan@5,7 {
+ reg = <5 7>;
+ function = LED_FUNCTION_WLAN;
+ };
+ };
+ };
};
&ir {
--
2.35.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-02-24 20:11 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-24 20:00 [PATCH v4 0/6] auxdisplay: Add support for the Titanmec TM1628 7 segment display controller Heiner Kallweit
2022-02-24 20:00 ` Heiner Kallweit
2022-02-24 20:00 ` Heiner Kallweit
2022-02-24 20:02 ` [PATCH v4 1/6] dt-bindings: vendor-prefixes: Add Titan Micro Electronics Heiner Kallweit
2022-02-24 20:02 ` Heiner Kallweit
2022-02-24 20:02 ` Heiner Kallweit
2022-02-24 20:03 ` [PATCH v4 2/6] dt-bindings: auxdisplay: Add Titan Micro Electronics TM1628 Heiner Kallweit
2022-02-24 20:03 ` Heiner Kallweit
2022-02-24 20:03 ` Heiner Kallweit
2022-02-24 20:05 ` [PATCH v4 3/6] docs: ABI: document tm1628 attribute display_text Heiner Kallweit
2022-02-24 20:05 ` Heiner Kallweit
2022-02-24 20:05 ` Heiner Kallweit
2022-02-24 20:09 ` [PATCH v4 4/6] auxdisplay: add support for Titanmec TM1628 7 segment display controller Heiner Kallweit
2022-02-24 20:09 ` Heiner Kallweit
2022-02-24 20:09 ` Heiner Kallweit
2022-02-24 20:10 ` Heiner Kallweit [this message]
2022-02-24 20:10 ` [PATCH v4 5/6] arm64: dts: meson-gxl-s905w-tx3-mini: add support for the 7 segment display Heiner Kallweit
2022-02-24 20:10 ` Heiner Kallweit
2022-02-24 20:11 ` [PATCH v4 6/6] MAINTAINERS: Add entry for tm1628 auxdisplay driver Heiner Kallweit
2022-02-24 20:11 ` Heiner Kallweit
2022-02-24 20:11 ` Heiner Kallweit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a9db41fc-3409-7a5f-00b1-e9619b80ca5e@gmail.com \
--to=hkallweit1@gmail.com \
--cc=afaerber@suse.de \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=narmstrong@baylibre.com \
--cc=ojeda@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.