From: Leonard Crestez <leonard.crestez@nxp.com> To: Jacky Bai <ping.bai@nxp.com>, Abel Vesa <abel.vesa@nxp.com>, Stephen Boyd <sboyd@kernel.org>, Shawn Guo <shawnguo@kernel.org> Cc: Anson Huang <Anson.Huang@nxp.com>, Michael Turquette <mturquette@baylibre.com>, Dong Aisheng <aisheng.dong@nxp.com>, Fabio Estevam <fabio.estevam@nxp.com>, linux-clk@vger.kernel.org, kernel@pengutronix.de, linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH 4/4] clk: imx8mn: Add GIC clock Date: Tue, 13 Aug 2019 20:05:31 +0300 [thread overview] Message-ID: <aac1c184fd39a96239618ec9bdcc95c5520abb8d.1565715590.git.leonard.crestez@nxp.com> (raw) In-Reply-To: <cover.1565715590.git.leonard.crestez@nxp.com> In-Reply-To: <cover.1565715590.git.leonard.crestez@nxp.com> This is enabled by default but if it's not explicitly defined and marked as critical then its parent might get turned off. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> --- drivers/clk/imx/clk-imx8mn.c | 5 +++++ include/dt-bindings/clock/imx8mn-clock.h | 3 ++- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c index 106cc417c19b..3a71bb37c656 100644 --- a/drivers/clk/imx/clk-imx8mn.c +++ b/drivers/clk/imx/clk-imx8mn.c @@ -269,10 +269,14 @@ static const char * const imx8mn_usb_core_sels[] = {"osc_24m", "sys_pll1_100m", static const char * const imx8mn_usb_phy_sels[] = {"osc_24m", "sys_pll1_100m", "sys_pll1_40m", "sys_pll2_100m", "sys_pll2_200m", "clk_ext2", "clk_ext3", "audio_pll2_out", }; +static const char * const imx8mn_gic_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll1_40m", + "sys_pll2_100m", "sys_pll1_800m", "clk_ext2", + "clk_ext4", "audio_pll2_out" }; + static const char * const imx8mn_ecspi1_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll1_40m", "sys_pll1_160m", "sys_pll1_800m", "sys_pll3_out", "sys_pll2_250m", "audio_pll2_out", }; static const char * const imx8mn_ecspi2_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll1_40m", @@ -522,10 +526,11 @@ static int imx8mn_clocks_probe(struct platform_device *pdev) clks[IMX8MN_CLK_UART2] = imx8m_clk_composite("uart2", imx8mn_uart2_sels, base + 0xaf80); clks[IMX8MN_CLK_UART3] = imx8m_clk_composite("uart3", imx8mn_uart3_sels, base + 0xb000); clks[IMX8MN_CLK_UART4] = imx8m_clk_composite("uart4", imx8mn_uart4_sels, base + 0xb080); clks[IMX8MN_CLK_USB_CORE_REF] = imx8m_clk_composite("usb_core_ref", imx8mn_usb_core_sels, base + 0xb100); clks[IMX8MN_CLK_USB_PHY_REF] = imx8m_clk_composite("usb_phy_ref", imx8mn_usb_phy_sels, base + 0xb180); + clks[IMX8MN_CLK_GIC] = imx8m_clk_composite_critical("gic", imx8mn_gic_sels, base + 0xb200); clks[IMX8MN_CLK_ECSPI1] = imx8m_clk_composite("ecspi1", imx8mn_ecspi1_sels, base + 0xb280); clks[IMX8MN_CLK_ECSPI2] = imx8m_clk_composite("ecspi2", imx8mn_ecspi2_sels, base + 0xb300); clks[IMX8MN_CLK_PWM1] = imx8m_clk_composite("pwm1", imx8mn_pwm1_sels, base + 0xb380); clks[IMX8MN_CLK_PWM2] = imx8m_clk_composite("pwm2", imx8mn_pwm2_sels, base + 0xb400); clks[IMX8MN_CLK_PWM3] = imx8m_clk_composite("pwm3", imx8mn_pwm3_sels, base + 0xb480); diff --git a/include/dt-bindings/clock/imx8mn-clock.h b/include/dt-bindings/clock/imx8mn-clock.h index 5255b1c2420e..d7b201652f4c 100644 --- a/include/dt-bindings/clock/imx8mn-clock.h +++ b/include/dt-bindings/clock/imx8mn-clock.h @@ -207,9 +207,10 @@ #define IMX8MN_CLK_SDMA3_ROOT 189 #define IMX8MN_CLK_TMU_ROOT 190 #define IMX8MN_CLK_ARM 191 #define IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK 192 #define IMX8MN_CLK_GPU_CORE_ROOT 193 +#define IMX8MN_CLK_GIC 194 -#define IMX8MN_CLK_END 194 +#define IMX8MN_CLK_END 195 #endif -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Leonard Crestez <leonard.crestez@nxp.com> To: Jacky Bai <ping.bai@nxp.com>, Abel Vesa <abel.vesa@nxp.com>, Stephen Boyd <sboyd@kernel.org>, Shawn Guo <shawnguo@kernel.org> Cc: Dong Aisheng <aisheng.dong@nxp.com>, Anson Huang <Anson.Huang@nxp.com>, Michael Turquette <mturquette@baylibre.com>, linux-imx@nxp.com, kernel@pengutronix.de, Fabio Estevam <fabio.estevam@nxp.com>, linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 4/4] clk: imx8mn: Add GIC clock Date: Tue, 13 Aug 2019 20:05:31 +0300 [thread overview] Message-ID: <aac1c184fd39a96239618ec9bdcc95c5520abb8d.1565715590.git.leonard.crestez@nxp.com> (raw) In-Reply-To: <cover.1565715590.git.leonard.crestez@nxp.com> In-Reply-To: <cover.1565715590.git.leonard.crestez@nxp.com> This is enabled by default but if it's not explicitly defined and marked as critical then its parent might get turned off. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> --- drivers/clk/imx/clk-imx8mn.c | 5 +++++ include/dt-bindings/clock/imx8mn-clock.h | 3 ++- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c index 106cc417c19b..3a71bb37c656 100644 --- a/drivers/clk/imx/clk-imx8mn.c +++ b/drivers/clk/imx/clk-imx8mn.c @@ -269,10 +269,14 @@ static const char * const imx8mn_usb_core_sels[] = {"osc_24m", "sys_pll1_100m", static const char * const imx8mn_usb_phy_sels[] = {"osc_24m", "sys_pll1_100m", "sys_pll1_40m", "sys_pll2_100m", "sys_pll2_200m", "clk_ext2", "clk_ext3", "audio_pll2_out", }; +static const char * const imx8mn_gic_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll1_40m", + "sys_pll2_100m", "sys_pll1_800m", "clk_ext2", + "clk_ext4", "audio_pll2_out" }; + static const char * const imx8mn_ecspi1_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll1_40m", "sys_pll1_160m", "sys_pll1_800m", "sys_pll3_out", "sys_pll2_250m", "audio_pll2_out", }; static const char * const imx8mn_ecspi2_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll1_40m", @@ -522,10 +526,11 @@ static int imx8mn_clocks_probe(struct platform_device *pdev) clks[IMX8MN_CLK_UART2] = imx8m_clk_composite("uart2", imx8mn_uart2_sels, base + 0xaf80); clks[IMX8MN_CLK_UART3] = imx8m_clk_composite("uart3", imx8mn_uart3_sels, base + 0xb000); clks[IMX8MN_CLK_UART4] = imx8m_clk_composite("uart4", imx8mn_uart4_sels, base + 0xb080); clks[IMX8MN_CLK_USB_CORE_REF] = imx8m_clk_composite("usb_core_ref", imx8mn_usb_core_sels, base + 0xb100); clks[IMX8MN_CLK_USB_PHY_REF] = imx8m_clk_composite("usb_phy_ref", imx8mn_usb_phy_sels, base + 0xb180); + clks[IMX8MN_CLK_GIC] = imx8m_clk_composite_critical("gic", imx8mn_gic_sels, base + 0xb200); clks[IMX8MN_CLK_ECSPI1] = imx8m_clk_composite("ecspi1", imx8mn_ecspi1_sels, base + 0xb280); clks[IMX8MN_CLK_ECSPI2] = imx8m_clk_composite("ecspi2", imx8mn_ecspi2_sels, base + 0xb300); clks[IMX8MN_CLK_PWM1] = imx8m_clk_composite("pwm1", imx8mn_pwm1_sels, base + 0xb380); clks[IMX8MN_CLK_PWM2] = imx8m_clk_composite("pwm2", imx8mn_pwm2_sels, base + 0xb400); clks[IMX8MN_CLK_PWM3] = imx8m_clk_composite("pwm3", imx8mn_pwm3_sels, base + 0xb480); diff --git a/include/dt-bindings/clock/imx8mn-clock.h b/include/dt-bindings/clock/imx8mn-clock.h index 5255b1c2420e..d7b201652f4c 100644 --- a/include/dt-bindings/clock/imx8mn-clock.h +++ b/include/dt-bindings/clock/imx8mn-clock.h @@ -207,9 +207,10 @@ #define IMX8MN_CLK_SDMA3_ROOT 189 #define IMX8MN_CLK_TMU_ROOT 190 #define IMX8MN_CLK_ARM 191 #define IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK 192 #define IMX8MN_CLK_GPU_CORE_ROOT 193 +#define IMX8MN_CLK_GIC 194 -#define IMX8MN_CLK_END 194 +#define IMX8MN_CLK_END 195 #endif -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-13 17:05 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-08-13 17:05 [PATCH 0/4] clk: imx8m: Fix incorrect parents Leonard Crestez 2019-08-13 17:05 ` Leonard Crestez 2019-08-13 17:05 ` [PATCH 1/4] clk: imx8mq: Fix sys3 pll references Leonard Crestez 2019-08-13 17:05 ` Leonard Crestez 2019-08-13 17:05 ` [PATCH 2/4] clk: imx8mm: Fix incorrect parents Leonard Crestez 2019-08-13 17:05 ` Leonard Crestez 2019-08-13 17:05 ` [PATCH 3/4] clk: imx8mn: " Leonard Crestez 2019-08-13 17:05 ` Leonard Crestez 2019-08-13 17:05 ` Leonard Crestez [this message] 2019-08-13 17:05 ` [PATCH 4/4] clk: imx8mn: Add GIC clock Leonard Crestez 2019-08-15 19:36 ` [PATCH 0/4] clk: imx8m: Fix incorrect parents Stephen Boyd 2019-08-15 19:36 ` Stephen Boyd 2019-08-19 11:55 ` Shawn Guo 2019-08-19 11:55 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=aac1c184fd39a96239618ec9bdcc95c5520abb8d.1565715590.git.leonard.crestez@nxp.com \ --to=leonard.crestez@nxp.com \ --cc=Anson.Huang@nxp.com \ --cc=abel.vesa@nxp.com \ --cc=aisheng.dong@nxp.com \ --cc=fabio.estevam@nxp.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-imx@nxp.com \ --cc=mturquette@baylibre.com \ --cc=ping.bai@nxp.com \ --cc=sboyd@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.