All of lore.kernel.org
 help / color / mirror / Atom feed
From: Leonard Crestez <leonard.crestez@nxp.com>
To: Lucas Stach <l.stach@pengutronix.de>,
	Andrey Smirnov <andrew.smirnov@gmail.com>,
	Richard Zhu <hongxing.zhu@nxp.com>,
	Shawn Guo <shawnguo@kernel.org>
Cc: Anson Huang <Anson.Huang@nxp.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Joao Pinto <Joao.Pinto@synopsys.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Dong Aisheng <aisheng.dong@nxp.com>,
	linux-imx@nxp.com, kernel@pengutronix.de,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/2] PCI: imx: Initial imx7d pm support
Date: Tue, 24 Jul 2018 19:14:20 +0300	[thread overview]
Message-ID: <acafccc294f15a281cf1d253c15a3eec2d1c8cc5.1532448745.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1532448745.git.leonard.crestez@nxp.com>

On imx7d the pcie-phy power domain is turned off in suspend and this can
make the system hang after resume when attempting any read from PCI.

Fix this by adding minimal suspend/resume code from the nxp internal
tree. This will prepare for powering down on suspend and reset the block
on resume.

Code is only for imx7d but a very similar sequence can be used for
other socs.

The original author is mostly Richard Zhu <hongxing.zhu@nxp.com>, this
patch adjusts the code to the upstream imx7d implemention using reset
controls and power domains.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 97 +++++++++++++++++++++++++--
 1 file changed, 92 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 4a9a673b4777..65b6d1015723 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -540,10 +540,28 @@ static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
 
 	dev_err(dev, "Speed change timeout\n");
 	return -EINVAL;
 }
 
+static void imx6_pcie_ltssm_enable(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	switch (imx6_pcie->variant) {
+	case IMX6Q:
+	case IMX6SX:
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_PCIE_CTL_2,
+				   IMX6Q_GPR12_PCIE_CTL_2);
+		break;
+	case IMX7D:
+		reset_control_deassert(imx6_pcie->apps_reset);
+		break;
+	}
+}
+
 static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 {
 	struct dw_pcie *pci = imx6_pcie->pci;
 	struct device *dev = pci->dev;
 	u32 tmp;
@@ -558,15 +576,11 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 	tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
 	tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1;
 	dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
 
 	/* Start LTSSM. */
-	if (imx6_pcie->variant == IMX7D)
-		reset_control_deassert(imx6_pcie->apps_reset);
-	else
-		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-				   IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
+	imx6_pcie_ltssm_enable(dev);
 
 	ret = imx6_pcie_wait_for_link(imx6_pcie);
 	if (ret)
 		goto err_reset_phy;
 
@@ -680,10 +694,82 @@ static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
 
 static const struct dw_pcie_ops dw_pcie_ops = {
 	.link_up = imx6_pcie_link_up,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static void imx6_pcie_ltssm_disable(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	switch (imx6_pcie->variant) {
+	case IMX6SX:
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_PCIE_CTL_2, 0);
+		break;
+	case IMX7D:
+		reset_control_assert(imx6_pcie->apps_reset);
+		break;
+	default:
+		dev_err(dev, "ltssm_disable not supported\n");
+	}
+}
+
+static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
+{
+	clk_disable_unprepare(imx6_pcie->pcie);
+	clk_disable_unprepare(imx6_pcie->pcie_phy);
+	clk_disable_unprepare(imx6_pcie->pcie_bus);
+
+	if (imx6_pcie->variant == IMX7D) {
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
+				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
+	}
+}
+
+static int imx6_pcie_suspend_noirq(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	if (imx6_pcie->variant != IMX7D)
+		return 0;
+
+	imx6_pcie_clk_disable(imx6_pcie);
+	imx6_pcie_ltssm_disable(dev);
+
+	return 0;
+}
+
+static int imx6_pcie_resume_noirq(struct device *dev)
+{
+	int ret;
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+	struct pcie_port *pp = &imx6_pcie->pci->pp;
+
+	if (imx6_pcie->variant != IMX7D)
+		return 0;
+
+	imx6_pcie_assert_core_reset(imx6_pcie);
+	imx6_pcie_init_phy(imx6_pcie);
+	imx6_pcie_deassert_core_reset(imx6_pcie);
+	dw_pcie_setup_rc(pp);
+
+	ret = imx6_pcie_establish_link(imx6_pcie);
+	if (ret < 0)
+		dev_info(dev, "pcie link is down after resume.\n");
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops imx6_pcie_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(imx6_pcie_suspend_noirq,
+				      imx6_pcie_resume_noirq)
+};
+
 static int imx6_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct dw_pcie *pci;
 	struct imx6_pcie *imx6_pcie;
@@ -846,10 +932,11 @@ static const struct of_device_id imx6_pcie_of_match[] = {
 static struct platform_driver imx6_pcie_driver = {
 	.driver = {
 		.name	= "imx6q-pcie",
 		.of_match_table = imx6_pcie_of_match,
 		.suppress_bind_attrs = true,
+		.pm = &imx6_pcie_pm_ops,
 	},
 	.probe    = imx6_pcie_probe,
 	.shutdown = imx6_pcie_shutdown,
 };
 
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Leonard Crestez <leonard.crestez@nxp.com>
To: Lucas Stach <l.stach@pengutronix.de>,
	Andrey Smirnov <andrew.smirnov@gmail.com>,
	Richard Zhu <hongxing.zhu@nxp.com>,
	Shawn Guo <shawnguo@kernel.org>
Cc: Dong Aisheng <aisheng.dong@nxp.com>,
	Joao Pinto <Joao.Pinto@synopsys.com>,
	kernel@pengutronix.de, Anson Huang <Anson.Huang@nxp.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	linux-kernel@vger.kernel.org,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	linux-imx@nxp.com, Philipp Zabel <p.zabel@pengutronix.de>,
	linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/2] PCI: imx: Initial imx7d pm support
Date: Tue, 24 Jul 2018 19:14:20 +0300	[thread overview]
Message-ID: <acafccc294f15a281cf1d253c15a3eec2d1c8cc5.1532448745.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1532448745.git.leonard.crestez@nxp.com>

On imx7d the pcie-phy power domain is turned off in suspend and this can
make the system hang after resume when attempting any read from PCI.

Fix this by adding minimal suspend/resume code from the nxp internal
tree. This will prepare for powering down on suspend and reset the block
on resume.

Code is only for imx7d but a very similar sequence can be used for
other socs.

The original author is mostly Richard Zhu <hongxing.zhu@nxp.com>, this
patch adjusts the code to the upstream imx7d implemention using reset
controls and power domains.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 97 +++++++++++++++++++++++++--
 1 file changed, 92 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 4a9a673b4777..65b6d1015723 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -540,10 +540,28 @@ static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
 
 	dev_err(dev, "Speed change timeout\n");
 	return -EINVAL;
 }
 
+static void imx6_pcie_ltssm_enable(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	switch (imx6_pcie->variant) {
+	case IMX6Q:
+	case IMX6SX:
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_PCIE_CTL_2,
+				   IMX6Q_GPR12_PCIE_CTL_2);
+		break;
+	case IMX7D:
+		reset_control_deassert(imx6_pcie->apps_reset);
+		break;
+	}
+}
+
 static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 {
 	struct dw_pcie *pci = imx6_pcie->pci;
 	struct device *dev = pci->dev;
 	u32 tmp;
@@ -558,15 +576,11 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 	tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
 	tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1;
 	dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
 
 	/* Start LTSSM. */
-	if (imx6_pcie->variant == IMX7D)
-		reset_control_deassert(imx6_pcie->apps_reset);
-	else
-		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-				   IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
+	imx6_pcie_ltssm_enable(dev);
 
 	ret = imx6_pcie_wait_for_link(imx6_pcie);
 	if (ret)
 		goto err_reset_phy;
 
@@ -680,10 +694,82 @@ static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
 
 static const struct dw_pcie_ops dw_pcie_ops = {
 	.link_up = imx6_pcie_link_up,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static void imx6_pcie_ltssm_disable(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	switch (imx6_pcie->variant) {
+	case IMX6SX:
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_PCIE_CTL_2, 0);
+		break;
+	case IMX7D:
+		reset_control_assert(imx6_pcie->apps_reset);
+		break;
+	default:
+		dev_err(dev, "ltssm_disable not supported\n");
+	}
+}
+
+static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
+{
+	clk_disable_unprepare(imx6_pcie->pcie);
+	clk_disable_unprepare(imx6_pcie->pcie_phy);
+	clk_disable_unprepare(imx6_pcie->pcie_bus);
+
+	if (imx6_pcie->variant == IMX7D) {
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
+				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
+	}
+}
+
+static int imx6_pcie_suspend_noirq(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	if (imx6_pcie->variant != IMX7D)
+		return 0;
+
+	imx6_pcie_clk_disable(imx6_pcie);
+	imx6_pcie_ltssm_disable(dev);
+
+	return 0;
+}
+
+static int imx6_pcie_resume_noirq(struct device *dev)
+{
+	int ret;
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+	struct pcie_port *pp = &imx6_pcie->pci->pp;
+
+	if (imx6_pcie->variant != IMX7D)
+		return 0;
+
+	imx6_pcie_assert_core_reset(imx6_pcie);
+	imx6_pcie_init_phy(imx6_pcie);
+	imx6_pcie_deassert_core_reset(imx6_pcie);
+	dw_pcie_setup_rc(pp);
+
+	ret = imx6_pcie_establish_link(imx6_pcie);
+	if (ret < 0)
+		dev_info(dev, "pcie link is down after resume.\n");
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops imx6_pcie_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(imx6_pcie_suspend_noirq,
+				      imx6_pcie_resume_noirq)
+};
+
 static int imx6_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct dw_pcie *pci;
 	struct imx6_pcie *imx6_pcie;
@@ -846,10 +932,11 @@ static const struct of_device_id imx6_pcie_of_match[] = {
 static struct platform_driver imx6_pcie_driver = {
 	.driver = {
 		.name	= "imx6q-pcie",
 		.of_match_table = imx6_pcie_of_match,
 		.suppress_bind_attrs = true,
+		.pm = &imx6_pcie_pm_ops,
 	},
 	.probe    = imx6_pcie_probe,
 	.shutdown = imx6_pcie_shutdown,
 };
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: leonard.crestez@nxp.com (Leonard Crestez)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/2] PCI: imx: Initial imx7d pm support
Date: Tue, 24 Jul 2018 19:14:20 +0300	[thread overview]
Message-ID: <acafccc294f15a281cf1d253c15a3eec2d1c8cc5.1532448745.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1532448745.git.leonard.crestez@nxp.com>

On imx7d the pcie-phy power domain is turned off in suspend and this can
make the system hang after resume when attempting any read from PCI.

Fix this by adding minimal suspend/resume code from the nxp internal
tree. This will prepare for powering down on suspend and reset the block
on resume.

Code is only for imx7d but a very similar sequence can be used for
other socs.

The original author is mostly Richard Zhu <hongxing.zhu@nxp.com>, this
patch adjusts the code to the upstream imx7d implemention using reset
controls and power domains.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 97 +++++++++++++++++++++++++--
 1 file changed, 92 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 4a9a673b4777..65b6d1015723 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -540,10 +540,28 @@ static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
 
 	dev_err(dev, "Speed change timeout\n");
 	return -EINVAL;
 }
 
+static void imx6_pcie_ltssm_enable(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	switch (imx6_pcie->variant) {
+	case IMX6Q:
+	case IMX6SX:
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_PCIE_CTL_2,
+				   IMX6Q_GPR12_PCIE_CTL_2);
+		break;
+	case IMX7D:
+		reset_control_deassert(imx6_pcie->apps_reset);
+		break;
+	}
+}
+
 static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 {
 	struct dw_pcie *pci = imx6_pcie->pci;
 	struct device *dev = pci->dev;
 	u32 tmp;
@@ -558,15 +576,11 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 	tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
 	tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1;
 	dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
 
 	/* Start LTSSM. */
-	if (imx6_pcie->variant == IMX7D)
-		reset_control_deassert(imx6_pcie->apps_reset);
-	else
-		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-				   IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
+	imx6_pcie_ltssm_enable(dev);
 
 	ret = imx6_pcie_wait_for_link(imx6_pcie);
 	if (ret)
 		goto err_reset_phy;
 
@@ -680,10 +694,82 @@ static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
 
 static const struct dw_pcie_ops dw_pcie_ops = {
 	.link_up = imx6_pcie_link_up,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static void imx6_pcie_ltssm_disable(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	switch (imx6_pcie->variant) {
+	case IMX6SX:
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_PCIE_CTL_2, 0);
+		break;
+	case IMX7D:
+		reset_control_assert(imx6_pcie->apps_reset);
+		break;
+	default:
+		dev_err(dev, "ltssm_disable not supported\n");
+	}
+}
+
+static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
+{
+	clk_disable_unprepare(imx6_pcie->pcie);
+	clk_disable_unprepare(imx6_pcie->pcie_phy);
+	clk_disable_unprepare(imx6_pcie->pcie_bus);
+
+	if (imx6_pcie->variant == IMX7D) {
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
+				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
+	}
+}
+
+static int imx6_pcie_suspend_noirq(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	if (imx6_pcie->variant != IMX7D)
+		return 0;
+
+	imx6_pcie_clk_disable(imx6_pcie);
+	imx6_pcie_ltssm_disable(dev);
+
+	return 0;
+}
+
+static int imx6_pcie_resume_noirq(struct device *dev)
+{
+	int ret;
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+	struct pcie_port *pp = &imx6_pcie->pci->pp;
+
+	if (imx6_pcie->variant != IMX7D)
+		return 0;
+
+	imx6_pcie_assert_core_reset(imx6_pcie);
+	imx6_pcie_init_phy(imx6_pcie);
+	imx6_pcie_deassert_core_reset(imx6_pcie);
+	dw_pcie_setup_rc(pp);
+
+	ret = imx6_pcie_establish_link(imx6_pcie);
+	if (ret < 0)
+		dev_info(dev, "pcie link is down after resume.\n");
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops imx6_pcie_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(imx6_pcie_suspend_noirq,
+				      imx6_pcie_resume_noirq)
+};
+
 static int imx6_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct dw_pcie *pci;
 	struct imx6_pcie *imx6_pcie;
@@ -846,10 +932,11 @@ static const struct of_device_id imx6_pcie_of_match[] = {
 static struct platform_driver imx6_pcie_driver = {
 	.driver = {
 		.name	= "imx6q-pcie",
 		.of_match_table = imx6_pcie_of_match,
 		.suppress_bind_attrs = true,
+		.pm = &imx6_pcie_pm_ops,
 	},
 	.probe    = imx6_pcie_probe,
 	.shutdown = imx6_pcie_shutdown,
 };
 
-- 
2.17.1

  parent reply	other threads:[~2018-07-24 16:15 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-24 16:14 [PATCH v3 0/2] PCI: imx: Initial imx7d pm support Leonard Crestez
2018-07-24 16:14 ` Leonard Crestez
2018-07-24 16:14 ` Leonard Crestez
2018-07-24 16:14 ` [PATCH v3 1/2] Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping" Leonard Crestez
2018-07-24 16:14   ` Leonard Crestez
2018-07-24 16:14   ` Leonard Crestez
2018-07-24 16:52   ` Lucas Stach
2018-07-24 16:52     ` Lucas Stach
2018-07-24 16:52     ` Lucas Stach
2018-08-21 15:31   ` Shawn Guo
2018-08-21 15:31     ` Shawn Guo
2018-08-21 15:31     ` Shawn Guo
2018-07-24 16:14 ` Leonard Crestez [this message]
2018-07-24 16:14   ` [PATCH v3 2/2] PCI: imx: Initial imx7d pm support Leonard Crestez
2018-07-24 16:14   ` Leonard Crestez
2018-07-24 16:55   ` Lucas Stach
2018-07-24 16:55     ` Lucas Stach
2018-07-24 16:55     ` Lucas Stach
2018-08-08 10:53 ` [PATCH v3 0/2] " Leonard Crestez
2018-08-08 10:53   ` Leonard Crestez
2018-08-08 10:53   ` Leonard Crestez
2018-08-08 11:14   ` Lorenzo Pieralisi
2018-08-08 11:14     ` Lorenzo Pieralisi
2018-08-08 11:14     ` Lorenzo Pieralisi
2018-08-08 11:37     ` Leonard Crestez
2018-08-08 11:37       ` Leonard Crestez
2018-08-08 11:37       ` Leonard Crestez
2018-08-08 14:19       ` Lorenzo Pieralisi
2018-08-08 14:19         ` Lorenzo Pieralisi
2018-08-08 14:19         ` Lorenzo Pieralisi
2018-08-08 14:58         ` Leonard Crestez
2018-08-08 14:58           ` Leonard Crestez
2018-08-08 14:58           ` Leonard Crestez
2018-08-08 15:27           ` Lorenzo Pieralisi
2018-08-08 15:27             ` Lorenzo Pieralisi
2018-08-08 15:27             ` Lorenzo Pieralisi
2018-08-10 11:11             ` Leonard Crestez
2018-08-10 11:11               ` Leonard Crestez
2018-08-10 11:11               ` Leonard Crestez
2018-08-10 15:13               ` Lorenzo Pieralisi
2018-08-10 15:13                 ` Lorenzo Pieralisi
2018-08-10 15:13                 ` Lorenzo Pieralisi
2018-08-21 15:26                 ` Shawn Guo
2018-08-21 15:26                   ` Shawn Guo
2018-08-21 15:26                   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=acafccc294f15a281cf1d253c15a3eec2d1c8cc5.1532448745.git.leonard.crestez@nxp.com \
    --to=leonard.crestez@nxp.com \
    --cc=Anson.Huang@nxp.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=aisheng.dong@nxp.com \
    --cc=andrew.smirnov@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=fabio.estevam@nxp.com \
    --cc=hongxing.zhu@nxp.com \
    --cc=jingoohan1@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=p.zabel@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.