All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: Linux Doc Mailing List <linux-doc@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
	linux-kernel@vger.kernel.org, Jonathan Corbet <corbet@lwn.net>,
	Yoshinori Sato <ysato@users.sourceforge.jp>,
	Rich Felker <dalias@libc.org>,
	linux-sh@vger.kernel.org
Subject: [PATCH 17/22] docs: sh: convert register-banks.txt to ReST
Date: Mon, 15 Jun 2020 06:50:22 +0000	[thread overview]
Message-ID: <adf117cf1edd7f43cb839ff2800f4315dfbcce13.1592203650.git.mchehab+huawei@kernel.org> (raw)
In-Reply-To: <cover.1592203650.git.mchehab+huawei@kernel.org>

- Add a SPDX header;
- Adjust document title to follow ReST style;
- Add blank lines to make ReST markup happy
- Add it to sh/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/sh/index.rst                          |  1 +
 .../sh/{register-banks.txt => register-banks.rst}   | 13 ++++++++++---
 arch/sh/Kconfig.cpu                                 |  2 +-
 3 files changed, 12 insertions(+), 4 deletions(-)
 rename Documentation/sh/{register-banks.txt => register-banks.rst} (88%)

diff --git a/Documentation/sh/index.rst b/Documentation/sh/index.rst
index 56c08790265d..580f3b17e841 100644
--- a/Documentation/sh/index.rst
+++ b/Documentation/sh/index.rst
@@ -8,6 +8,7 @@ SuperH Interfaces Guide
     :maxdepth: 1
 
     new-machine
+    register-banks
 
 Memory Management
 ========diff --git a/Documentation/sh/register-banks.txt b/Documentation/sh/register-banks.rst
similarity index 88%
rename from Documentation/sh/register-banks.txt
rename to Documentation/sh/register-banks.rst
index a6719f2f6594..2bef5c8fcbbc 100644
--- a/Documentation/sh/register-banks.txt
+++ b/Documentation/sh/register-banks.rst
@@ -1,5 +1,8 @@
-	Notes on register bank usage in the kernel
-	=====================
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+Notes on register bank usage in the kernel
+=====================
 
 Introduction
 ------------
@@ -23,11 +26,15 @@ Presently the kernel uses several of these registers.
 
 	- r0_bank, r1_bank (referenced as k0 and k1, used for scratch
 	  registers when doing exception handling).
+
 	- r2_bank (used to track the EXPEVT/INTEVT code)
+
 		- Used by do_IRQ() and friends for doing irq mapping based off
 		  of the interrupt exception vector jump table offset
+
 	- r6_bank (global interrupt mask)
+
 		- The SR.IMASK interrupt handler makes use of this to set the
 		  interrupt priority level (used by local_irq_enable())
+
 	- r7_bank (current)
-
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
index 97ca35f2cd37..fff419f3d757 100644
--- a/arch/sh/Kconfig.cpu
+++ b/arch/sh/Kconfig.cpu
@@ -85,7 +85,7 @@ config CPU_HAS_SR_RB
 	  that are lacking this bit must have another method in place for
 	  accomplishing what is taken care of by the banked registers.
 
-	  See <file:Documentation/sh/register-banks.txt> for further
+	  See <file:Documentation/sh/register-banks.rst> for further
 	  information on SR.RB and register banking in the kernel in general.
 
 config CPU_HAS_PTEAEX
-- 
2.26.2

WARNING: multiple messages have this Message-ID (diff)
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: Linux Doc Mailing List <linux-doc@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
	linux-kernel@vger.kernel.org, Jonathan Corbet <corbet@lwn.net>,
	Yoshinori Sato <ysato@users.sourceforge.jp>,
	Rich Felker <dalias@libc.org>,
	linux-sh@vger.kernel.org
Subject: [PATCH 17/22] docs: sh: convert register-banks.txt to ReST
Date: Mon, 15 Jun 2020 08:50:22 +0200	[thread overview]
Message-ID: <adf117cf1edd7f43cb839ff2800f4315dfbcce13.1592203650.git.mchehab+huawei@kernel.org> (raw)
In-Reply-To: <cover.1592203650.git.mchehab+huawei@kernel.org>

- Add a SPDX header;
- Adjust document title to follow ReST style;
- Add blank lines to make ReST markup happy
- Add it to sh/index.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/sh/index.rst                          |  1 +
 .../sh/{register-banks.txt => register-banks.rst}   | 13 ++++++++++---
 arch/sh/Kconfig.cpu                                 |  2 +-
 3 files changed, 12 insertions(+), 4 deletions(-)
 rename Documentation/sh/{register-banks.txt => register-banks.rst} (88%)

diff --git a/Documentation/sh/index.rst b/Documentation/sh/index.rst
index 56c08790265d..580f3b17e841 100644
--- a/Documentation/sh/index.rst
+++ b/Documentation/sh/index.rst
@@ -8,6 +8,7 @@ SuperH Interfaces Guide
     :maxdepth: 1
 
     new-machine
+    register-banks
 
 Memory Management
 =================
diff --git a/Documentation/sh/register-banks.txt b/Documentation/sh/register-banks.rst
similarity index 88%
rename from Documentation/sh/register-banks.txt
rename to Documentation/sh/register-banks.rst
index a6719f2f6594..2bef5c8fcbbc 100644
--- a/Documentation/sh/register-banks.txt
+++ b/Documentation/sh/register-banks.rst
@@ -1,5 +1,8 @@
-	Notes on register bank usage in the kernel
-	==========================================
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================================
+Notes on register bank usage in the kernel
+==========================================
 
 Introduction
 ------------
@@ -23,11 +26,15 @@ Presently the kernel uses several of these registers.
 
 	- r0_bank, r1_bank (referenced as k0 and k1, used for scratch
 	  registers when doing exception handling).
+
 	- r2_bank (used to track the EXPEVT/INTEVT code)
+
 		- Used by do_IRQ() and friends for doing irq mapping based off
 		  of the interrupt exception vector jump table offset
+
 	- r6_bank (global interrupt mask)
+
 		- The SR.IMASK interrupt handler makes use of this to set the
 		  interrupt priority level (used by local_irq_enable())
+
 	- r7_bank (current)
-
diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
index 97ca35f2cd37..fff419f3d757 100644
--- a/arch/sh/Kconfig.cpu
+++ b/arch/sh/Kconfig.cpu
@@ -85,7 +85,7 @@ config CPU_HAS_SR_RB
 	  that are lacking this bit must have another method in place for
 	  accomplishing what is taken care of by the banked registers.
 
-	  See <file:Documentation/sh/register-banks.txt> for further
+	  See <file:Documentation/sh/register-banks.rst> for further
 	  information on SR.RB and register banking in the kernel in general.
 
 config CPU_HAS_PTEAEX
-- 
2.26.2


  parent reply	other threads:[~2020-06-15  6:50 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-15  6:50 [PATCH 00/22] ReST conversion patches (final?) Mauro Carvalho Chehab
2020-06-15  6:50 ` Mauro Carvalho Chehab
2020-06-15  6:50 ` Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 01/22] docs: dt: convert booting-without-of.txt to ReST format Mauro Carvalho Chehab
2020-06-19 20:00   ` Jonathan Corbet
2020-06-15  6:50 ` [PATCH 02/22] docs: thermal: convert cpu-idle-cooling.rst to ReST Mauro Carvalho Chehab
2020-06-19 20:02   ` Jonathan Corbet
2020-06-15  6:50 ` [PATCH 03/22] docs: crypto: convert asymmetric-keys.txt " Mauro Carvalho Chehab
2020-06-15  6:50   ` Mauro Carvalho Chehab
2020-06-19 20:03   ` Jonathan Corbet
2020-06-19 20:03     ` Jonathan Corbet
2020-06-15  6:50 ` [PATCH 04/22] docs: crypto: convert api-intro.txt to ReST format Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 05/22] docs: crypto: convert async-tx-api.txt " Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 06/22] docs: crypto: descore-readme.txt: convert " Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 07/22] docs: misc-devices/spear-pcie-gadget.txt: convert to ReST Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 08/22] docs: misc-devices/pci-endpoint-test.txt: " Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 09/22] " Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 10/22] docs: misc-devices/c2port.txt: convert to ReST format Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 11/22] docs: misc-devices/bh1770glc.txt: convert to ReST Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 12/22] docs: misc-devices/apds990x.txt: convert to ReST format Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 13/22] docs: pci: endpoint/function/binding/pci-test.txt convert to ReST Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 14/22] docs: arm64: convert perf.txt to ReST format Mauro Carvalho Chehab
2020-06-15  6:50   ` Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 15/22] docs: powerpc: convert vcpudispatch_stats.txt to ReST Mauro Carvalho Chehab
2020-06-15  6:50   ` Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 16/22] docs: sh: convert new-machine.txt " Mauro Carvalho Chehab
2020-06-15  6:50   ` Mauro Carvalho Chehab
2020-06-15  6:50 ` Mauro Carvalho Chehab [this message]
2020-06-15  6:50   ` [PATCH 17/22] docs: sh: convert register-banks.txt " Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 18/22] docs: trace: ring-buffer-design.txt: convert to ReST format Mauro Carvalho Chehab
2020-06-15 17:48   ` Joe Perches
2020-06-16  7:19     ` Mauro Carvalho Chehab
2020-06-19 20:13   ` Jonathan Corbet
2020-06-19 20:41     ` Steven Rostedt
2020-06-23  8:24       ` Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 19/22] docs: move other kAPI documents to core-api Mauro Carvalho Chehab
2020-06-15  6:50   ` Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 20/22] docs: move remaining stuff under Documentation/*.txt to Documentation/staging Mauro Carvalho Chehab
2020-06-15 14:03   ` Masami Hiramatsu
2020-06-15 16:18   ` Mathieu Poirier
2020-06-15  6:50 ` [PATCH 21/22] docs: staging: don't use literalinclude Mauro Carvalho Chehab
2020-06-15  6:50 ` [PATCH 22/22] docs: staging: use small font for literal includes Mauro Carvalho Chehab
2020-06-19 20:18   ` Jonathan Corbet
2020-06-19 20:20 ` [PATCH 00/22] ReST conversion patches (final?) Jonathan Corbet
2020-06-19 20:20   ` Jonathan Corbet
2020-06-19 20:20   ` Jonathan Corbet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=adf117cf1edd7f43cb839ff2800f4315dfbcce13.1592203650.git.mchehab+huawei@kernel.org \
    --to=mchehab+huawei@kernel.org \
    --cc=corbet@lwn.net \
    --cc=dalias@libc.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=ysato@users.sourceforge.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.