From: Christophe Leroy <christophe.leroy@csgroup.eu> To: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Paul Mackerras <paulus@samba.org>, Michael Ellerman <mpe@ellerman.id.au> Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org Subject: [PATCH v2 1/2] powerpc/8xx: Always fault when _PAGE_ACCESSED is not set Date: Mon, 12 Oct 2020 08:54:31 +0000 (UTC) [thread overview] Message-ID: <af834e8a0f1fa97bfae65664950f0984a70c4750.1602492856.git.christophe.leroy@csgroup.eu> (raw) The kernel expects pte_young() to work regardless of CONFIG_SWAP. Make sure a minor fault is taken to set _PAGE_ACCESSED when it is not already set, regardless of the selection of CONFIG_SWAP. This adds at least 3 instructions to the TLB miss exception handlers fast path. Following patch will reduce this overhead. Also update the rotation instruction to the correct number of bits to reflect all changes done to _PAGE_ACCESSED over time. Fixes: d069cb4373fe ("powerpc/8xx: Don't touch ACCESSED when no SWAP.") Fixes: 5f356497c384 ("powerpc/8xx: remove unused _PAGE_WRITETHRU") Fixes: e0a8e0d90a9f ("powerpc/8xx: Handle PAGE_USER via APG bits") Fixes: 5b2753fc3e8a ("powerpc/8xx: Implementation of PAGE_EXEC") Fixes: a891c43b97d3 ("powerpc/8xx: Prepare handlers for _PAGE_HUGE for 512k pages.") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> --- v2: Backporting to stable will have to be done manually. Squashed the first 3 patches in order to ease that backporting. --- arch/powerpc/kernel/head_8xx.S | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 9f359d3fba74..6f3799a04121 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -202,9 +202,7 @@ SystemCall: InstructionTLBMiss: mtspr SPRN_SPRG_SCRATCH0, r10 -#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_SWAP) || defined(CONFIG_HUGETLBFS) mtspr SPRN_SPRG_SCRATCH1, r11 -#endif /* If we are faulting a kernel address, we have to use the * kernel page tables. @@ -238,11 +236,9 @@ InstructionTLBMiss: rlwimi r11, r10, 32 - 9, _PMD_PAGE_512K mtspr SPRN_MI_TWC, r11 #endif -#ifdef CONFIG_SWAP - rlwinm r11, r10, 32-5, _PAGE_PRESENT + rlwinm r11, r10, 32-7, _PAGE_PRESENT and r11, r11, r10 rlwimi r10, r11, 0, _PAGE_PRESENT -#endif /* The Linux PTE won't go exactly into the MMU TLB. * Software indicator bits 20 and 23 must be clear. * Software indicator bits 22, 24, 25, 26, and 27 must be @@ -256,9 +252,7 @@ InstructionTLBMiss: /* Restore registers */ 0: mfspr r10, SPRN_SPRG_SCRATCH0 -#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_SWAP) || defined(CONFIG_HUGETLBFS) mfspr r11, SPRN_SPRG_SCRATCH1 -#endif rfi patch_site 0b, patch__itlbmiss_exit_1 @@ -268,9 +262,7 @@ InstructionTLBMiss: addi r10, r10, 1 stw r10, (itlb_miss_counter - PAGE_OFFSET)@l(0) mfspr r10, SPRN_SPRG_SCRATCH0 -#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_SWAP) mfspr r11, SPRN_SPRG_SCRATCH1 -#endif rfi #endif @@ -316,11 +308,9 @@ DataStoreTLBMiss: * r11 = ((r10 & PRESENT) & ((r10 & ACCESSED) >> 5)); * r10 = (r10 & ~PRESENT) | r11; */ -#ifdef CONFIG_SWAP - rlwinm r11, r10, 32-5, _PAGE_PRESENT + rlwinm r11, r10, 32-7, _PAGE_PRESENT and r11, r11, r10 rlwimi r10, r11, 0, _PAGE_PRESENT -#endif /* The Linux PTE won't go exactly into the MMU TLB. * Software indicator bits 24, 25, 26, and 27 must be * set. All other Linux PTE bits control the behavior -- 2.25.0
WARNING: multiple messages have this Message-ID (diff)
From: Christophe Leroy <christophe.leroy@csgroup.eu> To: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Paul Mackerras <paulus@samba.org>, Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 1/2] powerpc/8xx: Always fault when _PAGE_ACCESSED is not set Date: Mon, 12 Oct 2020 08:54:31 +0000 (UTC) [thread overview] Message-ID: <af834e8a0f1fa97bfae65664950f0984a70c4750.1602492856.git.christophe.leroy@csgroup.eu> (raw) The kernel expects pte_young() to work regardless of CONFIG_SWAP. Make sure a minor fault is taken to set _PAGE_ACCESSED when it is not already set, regardless of the selection of CONFIG_SWAP. This adds at least 3 instructions to the TLB miss exception handlers fast path. Following patch will reduce this overhead. Also update the rotation instruction to the correct number of bits to reflect all changes done to _PAGE_ACCESSED over time. Fixes: d069cb4373fe ("powerpc/8xx: Don't touch ACCESSED when no SWAP.") Fixes: 5f356497c384 ("powerpc/8xx: remove unused _PAGE_WRITETHRU") Fixes: e0a8e0d90a9f ("powerpc/8xx: Handle PAGE_USER via APG bits") Fixes: 5b2753fc3e8a ("powerpc/8xx: Implementation of PAGE_EXEC") Fixes: a891c43b97d3 ("powerpc/8xx: Prepare handlers for _PAGE_HUGE for 512k pages.") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> --- v2: Backporting to stable will have to be done manually. Squashed the first 3 patches in order to ease that backporting. --- arch/powerpc/kernel/head_8xx.S | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 9f359d3fba74..6f3799a04121 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -202,9 +202,7 @@ SystemCall: InstructionTLBMiss: mtspr SPRN_SPRG_SCRATCH0, r10 -#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_SWAP) || defined(CONFIG_HUGETLBFS) mtspr SPRN_SPRG_SCRATCH1, r11 -#endif /* If we are faulting a kernel address, we have to use the * kernel page tables. @@ -238,11 +236,9 @@ InstructionTLBMiss: rlwimi r11, r10, 32 - 9, _PMD_PAGE_512K mtspr SPRN_MI_TWC, r11 #endif -#ifdef CONFIG_SWAP - rlwinm r11, r10, 32-5, _PAGE_PRESENT + rlwinm r11, r10, 32-7, _PAGE_PRESENT and r11, r11, r10 rlwimi r10, r11, 0, _PAGE_PRESENT -#endif /* The Linux PTE won't go exactly into the MMU TLB. * Software indicator bits 20 and 23 must be clear. * Software indicator bits 22, 24, 25, 26, and 27 must be @@ -256,9 +252,7 @@ InstructionTLBMiss: /* Restore registers */ 0: mfspr r10, SPRN_SPRG_SCRATCH0 -#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_SWAP) || defined(CONFIG_HUGETLBFS) mfspr r11, SPRN_SPRG_SCRATCH1 -#endif rfi patch_site 0b, patch__itlbmiss_exit_1 @@ -268,9 +262,7 @@ InstructionTLBMiss: addi r10, r10, 1 stw r10, (itlb_miss_counter - PAGE_OFFSET)@l(0) mfspr r10, SPRN_SPRG_SCRATCH0 -#if defined(ITLB_MISS_KERNEL) || defined(CONFIG_SWAP) mfspr r11, SPRN_SPRG_SCRATCH1 -#endif rfi #endif @@ -316,11 +308,9 @@ DataStoreTLBMiss: * r11 = ((r10 & PRESENT) & ((r10 & ACCESSED) >> 5)); * r10 = (r10 & ~PRESENT) | r11; */ -#ifdef CONFIG_SWAP - rlwinm r11, r10, 32-5, _PAGE_PRESENT + rlwinm r11, r10, 32-7, _PAGE_PRESENT and r11, r11, r10 rlwimi r10, r11, 0, _PAGE_PRESENT -#endif /* The Linux PTE won't go exactly into the MMU TLB. * Software indicator bits 24, 25, 26, and 27 must be * set. All other Linux PTE bits control the behavior -- 2.25.0
next reply other threads:[~2020-10-12 8:54 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-10-12 8:54 Christophe Leroy [this message] 2020-10-12 8:54 ` [PATCH v2 1/2] powerpc/8xx: Always fault when _PAGE_ACCESSED is not set Christophe Leroy 2020-10-12 8:54 ` [PATCH v2 2/2] powerpc/8xx: Manage _PAGE_ACCESSED through APG bits in L1 entry Christophe Leroy 2020-10-12 8:54 ` Christophe Leroy 2020-11-08 10:29 ` [PATCH v2 1/2] powerpc/8xx: Always fault when _PAGE_ACCESSED is not set Michael Ellerman 2020-11-08 10:29 ` Michael Ellerman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=af834e8a0f1fa97bfae65664950f0984a70c4750.1602492856.git.christophe.leroy@csgroup.eu \ --to=christophe.leroy@csgroup.eu \ --cc=benh@kernel.crashing.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linuxppc-dev@lists.ozlabs.org \ --cc=mpe@ellerman.id.au \ --cc=paulus@samba.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.