From: Ryder Lee <ryder.lee@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: <linux-mediatek@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Erin Lo <erin.lo@mediatek.com>, YT Shen <yt.shen@mediatek.com>,
Ryder Lee <ryder.lo@mediatek.com>
Subject: [PATCH v2 03/10] arm: dts: mt2701: add display subsystem related nodes
Date: Tue, 26 Sep 2017 10:02:54 +0800 [thread overview]
Message-ID: <b1874b93aac73ebdc4e6cd5b6507cac0b116ddd7.1506390597.git.ryder.lee@mediatek.com> (raw)
In-Reply-To: <cover.1506390597.git.ryder.lee@mediatek.com>
From: YT Shen <yt.shen@mediatek.com>
This patch adds the device nodes for MT2701 DISP function blocks.
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lo@mediatek.com>
---
arch/arm/boot/dts/mt2701.dtsi | 75 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 75 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 3c85879..8c9fbe5 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -26,6 +26,11 @@
compatible = "mediatek,mt2701";
interrupt-parent = <&cirq>;
+ aliases {
+ rdma0 = &rdma0;
+ rdma1 = &rdma1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -203,6 +208,16 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
};
+ mipi_tx0: mipi-dphy@10010000 {
+ compatible = "mediatek,mt2701-mipi-tx";
+ reg = <0 0x10010000 0 0x90>;
+ clocks = <&clk26m>;
+ clock-output-names = "mipi_tx0_pll";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
sysirq: interrupt-controller@10200100 {
compatible = "mediatek,mt2701-sysirq",
"mediatek,mt6577-sysirq";
@@ -530,6 +545,30 @@
#clock-cells = <1>;
};
+ display_components: dispsys@14000000 {
+ compatible = "mediatek,mt2701-mmsys";
+ reg = <0 0x14000000 0 0x1000>;
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
+ ovl: ovl@14007000 {
+ compatible = "mediatek,mt2701-disp-ovl";
+ reg = <0 0x14007000 0 0x1000>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_OVL>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
+ mediatek,larb = <&larb0>;
+ };
+
+ rdma0: rdma@14008000 {
+ compatible = "mediatek,mt2701-disp-rdma";
+ reg = <0 0x14008000 0 0x1000>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
+ mediatek,larb = <&larb0>;
+ };
+
bls: pwm@1400a000 {
compatible = "mediatek,mt2701-disp-pwm";
reg = <0 0x1400a000 0 0x1000>;
@@ -539,6 +578,33 @@
status = "disabled";
};
+ color: color@1400b000 {
+ compatible = "mediatek,mt2701-disp-color";
+ reg = <0 0x1400b000 0 0x1000>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_COLOR>;
+ };
+
+ dsi: dsi@1400c000 {
+ compatible = "mediatek,mt2701-dsi";
+ reg = <0 0x1400c000 0 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DSI_ENGINE>,
+ <&mmsys CLK_MM_DSI_DIG>,
+ <&mipi_tx0>;
+ clock-names = "engine", "digital", "hs";
+ phys = <&mipi_tx0>;
+ phy-names = "dphy";
+ status = "disabled";
+ };
+
+ mutex: mutex@1400e000 {
+ compatible = "mediatek,mt2701-disp-mutex";
+ reg = <0 0x1400e000 0 0x1000>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_MUTEX_32K>;
+ };
+
larb0: larb@14010000 {
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x14010000 0 0x1000>;
@@ -550,6 +616,15 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
};
+ rdma1: rdma@14012000 {
+ compatible = "mediatek,mt2701-disp-rdma";
+ reg = <0 0x14012000 0 0x1000>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
+ mediatek,larb = <&larb0>;
+ };
+
imgsys: syscon@15000000 {
compatible = "mediatek,mt2701-imgsys", "syscon";
reg = <0 0x15000000 0 0x1000>;
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Ryder Lee <ryder.lee@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Erin Lo <erin.lo@mediatek.com>, YT Shen <yt.shen@mediatek.com>,
Ryder Lee <ryder.lo@mediatek.com>
Subject: [PATCH v2 03/10] arm: dts: mt2701: add display subsystem related nodes
Date: Tue, 26 Sep 2017 10:02:54 +0800 [thread overview]
Message-ID: <b1874b93aac73ebdc4e6cd5b6507cac0b116ddd7.1506390597.git.ryder.lee@mediatek.com> (raw)
In-Reply-To: <cover.1506390597.git.ryder.lee@mediatek.com>
From: YT Shen <yt.shen@mediatek.com>
This patch adds the device nodes for MT2701 DISP function blocks.
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lo@mediatek.com>
---
arch/arm/boot/dts/mt2701.dtsi | 75 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 75 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 3c85879..8c9fbe5 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -26,6 +26,11 @@
compatible = "mediatek,mt2701";
interrupt-parent = <&cirq>;
+ aliases {
+ rdma0 = &rdma0;
+ rdma1 = &rdma1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -203,6 +208,16 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
};
+ mipi_tx0: mipi-dphy@10010000 {
+ compatible = "mediatek,mt2701-mipi-tx";
+ reg = <0 0x10010000 0 0x90>;
+ clocks = <&clk26m>;
+ clock-output-names = "mipi_tx0_pll";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
sysirq: interrupt-controller@10200100 {
compatible = "mediatek,mt2701-sysirq",
"mediatek,mt6577-sysirq";
@@ -530,6 +545,30 @@
#clock-cells = <1>;
};
+ display_components: dispsys@14000000 {
+ compatible = "mediatek,mt2701-mmsys";
+ reg = <0 0x14000000 0 0x1000>;
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
+ ovl: ovl@14007000 {
+ compatible = "mediatek,mt2701-disp-ovl";
+ reg = <0 0x14007000 0 0x1000>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_OVL>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
+ mediatek,larb = <&larb0>;
+ };
+
+ rdma0: rdma@14008000 {
+ compatible = "mediatek,mt2701-disp-rdma";
+ reg = <0 0x14008000 0 0x1000>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
+ mediatek,larb = <&larb0>;
+ };
+
bls: pwm@1400a000 {
compatible = "mediatek,mt2701-disp-pwm";
reg = <0 0x1400a000 0 0x1000>;
@@ -539,6 +578,33 @@
status = "disabled";
};
+ color: color@1400b000 {
+ compatible = "mediatek,mt2701-disp-color";
+ reg = <0 0x1400b000 0 0x1000>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_COLOR>;
+ };
+
+ dsi: dsi@1400c000 {
+ compatible = "mediatek,mt2701-dsi";
+ reg = <0 0x1400c000 0 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DSI_ENGINE>,
+ <&mmsys CLK_MM_DSI_DIG>,
+ <&mipi_tx0>;
+ clock-names = "engine", "digital", "hs";
+ phys = <&mipi_tx0>;
+ phy-names = "dphy";
+ status = "disabled";
+ };
+
+ mutex: mutex@1400e000 {
+ compatible = "mediatek,mt2701-disp-mutex";
+ reg = <0 0x1400e000 0 0x1000>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_MUTEX_32K>;
+ };
+
larb0: larb@14010000 {
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x14010000 0 0x1000>;
@@ -550,6 +616,15 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
};
+ rdma1: rdma@14012000 {
+ compatible = "mediatek,mt2701-disp-rdma";
+ reg = <0 0x14012000 0 0x1000>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
+ mediatek,larb = <&larb0>;
+ };
+
imgsys: syscon@15000000 {
compatible = "mediatek,mt2701-imgsys", "syscon";
reg = <0 0x15000000 0 0x1000>;
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: ryder.lee@mediatek.com (Ryder Lee)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 03/10] arm: dts: mt2701: add display subsystem related nodes
Date: Tue, 26 Sep 2017 10:02:54 +0800 [thread overview]
Message-ID: <b1874b93aac73ebdc4e6cd5b6507cac0b116ddd7.1506390597.git.ryder.lee@mediatek.com> (raw)
In-Reply-To: <cover.1506390597.git.ryder.lee@mediatek.com>
From: YT Shen <yt.shen@mediatek.com>
This patch adds the device nodes for MT2701 DISP function blocks.
Signed-off-by: YT Shen <yt.shen@mediatek.com>
Signed-off-by: Erin Lo <erin.lo@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lo@mediatek.com>
---
arch/arm/boot/dts/mt2701.dtsi | 75 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 75 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 3c85879..8c9fbe5 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -26,6 +26,11 @@
compatible = "mediatek,mt2701";
interrupt-parent = <&cirq>;
+ aliases {
+ rdma0 = &rdma0;
+ rdma1 = &rdma1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -203,6 +208,16 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
};
+ mipi_tx0: mipi-dphy at 10010000 {
+ compatible = "mediatek,mt2701-mipi-tx";
+ reg = <0 0x10010000 0 0x90>;
+ clocks = <&clk26m>;
+ clock-output-names = "mipi_tx0_pll";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
sysirq: interrupt-controller at 10200100 {
compatible = "mediatek,mt2701-sysirq",
"mediatek,mt6577-sysirq";
@@ -530,6 +545,30 @@
#clock-cells = <1>;
};
+ display_components: dispsys at 14000000 {
+ compatible = "mediatek,mt2701-mmsys";
+ reg = <0 0x14000000 0 0x1000>;
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
+ ovl: ovl at 14007000 {
+ compatible = "mediatek,mt2701-disp-ovl";
+ reg = <0 0x14007000 0 0x1000>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_OVL>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
+ mediatek,larb = <&larb0>;
+ };
+
+ rdma0: rdma at 14008000 {
+ compatible = "mediatek,mt2701-disp-rdma";
+ reg = <0 0x14008000 0 0x1000>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
+ mediatek,larb = <&larb0>;
+ };
+
bls: pwm at 1400a000 {
compatible = "mediatek,mt2701-disp-pwm";
reg = <0 0x1400a000 0 0x1000>;
@@ -539,6 +578,33 @@
status = "disabled";
};
+ color: color at 1400b000 {
+ compatible = "mediatek,mt2701-disp-color";
+ reg = <0 0x1400b000 0 0x1000>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_COLOR>;
+ };
+
+ dsi: dsi at 1400c000 {
+ compatible = "mediatek,mt2701-dsi";
+ reg = <0 0x1400c000 0 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DSI_ENGINE>,
+ <&mmsys CLK_MM_DSI_DIG>,
+ <&mipi_tx0>;
+ clock-names = "engine", "digital", "hs";
+ phys = <&mipi_tx0>;
+ phy-names = "dphy";
+ status = "disabled";
+ };
+
+ mutex: mutex at 1400e000 {
+ compatible = "mediatek,mt2701-disp-mutex";
+ reg = <0 0x1400e000 0 0x1000>;
+ interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_MUTEX_32K>;
+ };
+
larb0: larb at 14010000 {
compatible = "mediatek,mt2701-smi-larb";
reg = <0 0x14010000 0 0x1000>;
@@ -550,6 +616,15 @@
power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
};
+ rdma1: rdma at 14012000 {
+ compatible = "mediatek,mt2701-disp-rdma";
+ reg = <0 0x14012000 0 0x1000>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+ iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
+ mediatek,larb = <&larb0>;
+ };
+
imgsys: syscon at 15000000 {
compatible = "mediatek,mt2701-imgsys", "syscon";
reg = <0 0x15000000 0 0x1000>;
--
1.9.1
next prev parent reply other threads:[~2017-09-26 2:03 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-26 2:02 [PATCH v2 00/10] update MT7623 and MT2701 dts Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 2:02 ` [PATCH v2 01/10] arm: dts: mt2701: add pwm backlight device node Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 2:02 ` [PATCH v2 02/10] arm: dts: mt2701: enable display pwm backlight Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 2:02 ` Ryder Lee [this message]
2017-09-26 2:02 ` [PATCH v2 03/10] arm: dts: mt2701: add display subsystem related nodes Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 2:02 ` [PATCH v2 04/10] arm: dts: mediatek: update audio node for mt2701 and mt7623 Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 2:02 ` [PATCH v2 05/10] arm: dts: mt7623: update pio, usb and crypto nodes Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 10:17 ` Yingjoe Chen
2017-09-26 10:17 ` Yingjoe Chen
2017-09-26 10:17 ` Yingjoe Chen
2017-09-27 3:22 ` Ryder Lee
2017-09-27 3:22 ` Ryder Lee
2017-09-27 3:22 ` Ryder Lee
2017-09-26 2:02 ` [PATCH v2 06/10] arm: dts: mt7623: add subsystem clock controller nodes Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 2:02 ` [PATCH v2 07/10] arm: dts: mt7623: add iommmu and jpecdec nodes Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 2:02 ` [PATCH v2 08/10] arm: dts: mt7623: add display subsystem related nodes Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 2:02 ` Ryder Lee
2017-09-26 2:03 ` [PATCH v2 09/10] arm: dts: mt7623: enable bananapi-r2 display function Ryder Lee
2017-09-26 2:03 ` Ryder Lee
2017-09-26 2:03 ` Ryder Lee
2017-09-26 2:03 ` [PATCH v2 10/10] arm: dts: mt7623: add PCIe related nodes Ryder Lee
2017-09-26 2:03 ` Ryder Lee
2017-09-26 2:03 ` Ryder Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b1874b93aac73ebdc4e6cd5b6507cac0b116ddd7.1506390597.git.ryder.lee@mediatek.com \
--to=ryder.lee@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=erin.lo@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=ryder.lo@mediatek.com \
--cc=yt.shen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.