From: Michal Simek <monstr@monstr.eu>
To: SoC Team <soc@kernel.org>
Cc: arm-soc <arm@kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: [GIT PULL] arm64: dts: ZynqMP DT changes for v5.16
Date: Wed, 15 Sep 2021 10:09:15 +0200 [thread overview]
Message-ID: <b1cbd05d-ab40-e1fc-4001-6cf88e1e81f9@monstr.eu> (raw)
Message-ID: <20210915080915.dO8t4Fjpwr8bJAL6a5CbqsqpwfiAa3pUTbO0WbmSTso@z> (raw)
Hi,
based on discussion at
https://lore.kernel.org/r/CAK8P3a0ZWxsUrGA2J8d=M-G=0Bbw16XfxuL=Uu=cXvPpMyQkgQ@mail.gmail.com
I am sending new pull request for adding DT changes which didn't go to
v5.15. There is likely be another pull request later for v5.16 kernel.
Thanks,
Michal
The following changes since commit 6880fa6c56601bb8ed59df6c30fd390cc5f6dd8f:
Linux 5.15-rc1 (2021-09-12 16:28:37 -0700)
are available in the Git repository at:
https://github.com/Xilinx/linux-xlnx.git tags/zynqmp-dt-for-v5.16
for you to fetch changes up to 35a7430dad4dd83fe295917b8232595f437bb208:
arm64: zynqmp: Wire psgtr for zc1751-xm013 (2021-09-13 08:55:56 +0200)
----------------------------------------------------------------
arm64: dts: ZynqMP DT changes for v5.16
- Fix issues reported by dtbs_check
- Enable DMAs, DP, USB, NAND on various boards
- Add description for irps5401
- Add pinctrl description
- Add psgtr description for usb3, sata and DP
- Start to use nvmem alias for eeprom reference
- Clean up aliases list
- Wire qspi and usb3.0
- Add support for zcu102-rev1.1
- Couple of minor fixes and sync patches
----------------------------------------------------------------
Amit Kumar Mahapatra (1):
arm64: zynqmp: Do not duplicate flash partition label property
Michal Simek (32):
arm64: zynqmp: Disable CCI by default
arm64: zynqmp: Enable fpd_dma for zcu104 platforms
arm64: zynqmp: Fix irps5401 device nodes
arm64: zynqmp: Add pinctrl description for all boards
arm64: zynqmp: Correct zcu111 psgtr description
arm64: zynqmp: Wire psgtr for zc1751-xm015
arm64: zynqmp: Correct psgtr description for zcu100-revC
arm64: zynqmp: Add phy description for usb3.0
arm64: zynqmp: Disable WP on zcu111
arm64: zynqmp: Add missing mio-bank properties to dc1 and dc5
arm64: zynqmp: Wire DP and DPDMA for dc1/dc4
arm64: zynqmp: Enable nand driver for dc2 and dc3
arm64: zynqmp: Remove additional newline
arm64: zynqmp: Move clock node to zynqmp-clk-ccf.dtsi
arm64: zynqmp: Add nvmem alises for eeproms
arm64: zynqmp: List reset property for ethernet phy
arm64: zynqmp: Remove can aliases from zc1751
arm64: zynqmp: Move DP nodes to the end of file on zcu106
arm64: zynqmp: Add note about UHS mode on some boards
arm64: zynqmp: Remove information about dma clock on zcu106
arm64: zynqmp: Wire qspi on multiple boards
arm64: zynqmp: Move rtc to different location on zcu104-revA
arm64: zynqmp: Add reset description for sata
arm64: zynqmp: Sync psgtr node location with zcu104-revA
arm64: zynqmp: Remove description for 8T49N287 and si5382 chips
arm64: zynqmp: Add support for zcu102-rev1.1 board
arm64: zynqmp: Add psgtr description to zc1751 dc1 board
arm64: zynqmp: Remove not documented is-dual property
arm64: zynqmp: Fix serial compatible string
arm64: zynqmp: Enable gpio and qspi for zc1275-revA
arm64: zynqmp: Enable xlnx,zynqmp-dwc3 driver for xilinx boards
arm64: zynqmp: Wire psgtr for zc1751-xm013
Mounika Grace Akula (1):
arm64: zynqmp: Add reset-on-timeout to all boards and modify
default timeout value
Srinivas Neeli (1):
arm64: zynqmp: Update rtc calibration value
Stefano Stabellini (1):
arm64: zynqmp: Add missing SMID for pcie to zynqmp.dtsi
Documentation/devicetree/bindings/arm/xilinx.yaml | 1 +
arch/arm64/boot/dts/xilinx/Makefile | 1 +
arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 13 +++++-
arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts | 16 +++++++-
arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts | 16 +++++++-
arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts | 18 ++++++++-
arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 298
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 342
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts | 49
++++++++++++++++++++++-
arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 24 ++++++++++-
arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts | 330
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 264
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts | 15 +++++++
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 320
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts | 3 +-
arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts | 292
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts | 250
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 340
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------
arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 274
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 93
++++++++++++++++++++++++++++---------------
20 files changed, 2861 insertions(+), 98 deletions(-)
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-09-15 8:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-15 8:09 Michal Simek [this message]
2021-09-15 8:09 ` [GIT PULL] arm64: dts: ZynqMP DT changes for v5.16 Michal Simek
2021-10-05 14:40 ` patchwork-bot+linux-soc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b1cbd05d-ab40-e1fc-4001-6cf88e1e81f9@monstr.eu \
--to=monstr@monstr.eu \
--cc=arm@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.