From: Christophe Leroy <christophe.leroy@csgroup.eu> To: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Paul Mackerras <paulus@samba.org>, Michael Ellerman <mpe@ellerman.id.au> Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org Subject: [PATCH] powerpc/8xx: Fix early debug when SMC1 is relocated Date: Fri, 4 Dec 2020 10:11:34 +0000 (UTC) [thread overview] Message-ID: <b2f71f39eca543f1e4ec06596f09a8b12235c701.1607076683.git.christophe.leroy@csgroup.eu> (raw) When SMC1 is relocated and early debug is selected, the board hangs is ppc_md.setup_arch(). This is because ones the microcode has been loaded and SMC1 relocated, early debug writes in the weed. To allow smooth continuation, the SMC1 parameter RAM set up by the bootloader have to be copied into the new location. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Fixes: 43db76f41824 ("powerpc/8xx: Add microcode patch to move SMC parameter RAM.") Cc: stable@vger.kernel.org --- arch/powerpc/include/asm/cpm1.h | 1 + arch/powerpc/platforms/8xx/micropatch.c | 11 +++++++++++ 2 files changed, 12 insertions(+) diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h index a116fe931789..3bdd74739cb8 100644 --- a/arch/powerpc/include/asm/cpm1.h +++ b/arch/powerpc/include/asm/cpm1.h @@ -68,6 +68,7 @@ extern void cpm_reset(void); #define PROFF_SPI ((uint)0x0180) #define PROFF_SCC3 ((uint)0x0200) #define PROFF_SMC1 ((uint)0x0280) +#define PROFF_DSP1 ((uint)0x02c0) #define PROFF_SCC4 ((uint)0x0300) #define PROFF_SMC2 ((uint)0x0380) diff --git a/arch/powerpc/platforms/8xx/micropatch.c b/arch/powerpc/platforms/8xx/micropatch.c index aed4bc75f352..aef179fcbd4f 100644 --- a/arch/powerpc/platforms/8xx/micropatch.c +++ b/arch/powerpc/platforms/8xx/micropatch.c @@ -360,6 +360,17 @@ void __init cpm_load_patch(cpm8xx_t *cp) if (IS_ENABLED(CONFIG_SMC_UCODE_PATCH)) { smc_uart_t *smp; + if (IS_ENABLED(CONFIG_PPC_EARLY_DEBUG_CPM)) { + int i; + + for (i = 0; i < sizeof(*smp); i += 4) { + u32 __iomem *src = (u32 __iomem *)&cp->cp_dparam[PROFF_SMC1 + i]; + u32 __iomem *dst = (u32 __iomem *)&cp->cp_dparam[PROFF_DSP1 + i]; + + out_be32(dst, in_be32(src)); + } + } + smp = (smc_uart_t *)&cp->cp_dparam[PROFF_SMC1]; out_be16(&smp->smc_rpbase, 0x1ec0); smp = (smc_uart_t *)&cp->cp_dparam[PROFF_SMC2]; -- 2.25.0
WARNING: multiple messages have this Message-ID (diff)
From: Christophe Leroy <christophe.leroy@csgroup.eu> To: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Paul Mackerras <paulus@samba.org>, Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org Subject: [PATCH] powerpc/8xx: Fix early debug when SMC1 is relocated Date: Fri, 4 Dec 2020 10:11:34 +0000 (UTC) [thread overview] Message-ID: <b2f71f39eca543f1e4ec06596f09a8b12235c701.1607076683.git.christophe.leroy@csgroup.eu> (raw) When SMC1 is relocated and early debug is selected, the board hangs is ppc_md.setup_arch(). This is because ones the microcode has been loaded and SMC1 relocated, early debug writes in the weed. To allow smooth continuation, the SMC1 parameter RAM set up by the bootloader have to be copied into the new location. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Fixes: 43db76f41824 ("powerpc/8xx: Add microcode patch to move SMC parameter RAM.") Cc: stable@vger.kernel.org --- arch/powerpc/include/asm/cpm1.h | 1 + arch/powerpc/platforms/8xx/micropatch.c | 11 +++++++++++ 2 files changed, 12 insertions(+) diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h index a116fe931789..3bdd74739cb8 100644 --- a/arch/powerpc/include/asm/cpm1.h +++ b/arch/powerpc/include/asm/cpm1.h @@ -68,6 +68,7 @@ extern void cpm_reset(void); #define PROFF_SPI ((uint)0x0180) #define PROFF_SCC3 ((uint)0x0200) #define PROFF_SMC1 ((uint)0x0280) +#define PROFF_DSP1 ((uint)0x02c0) #define PROFF_SCC4 ((uint)0x0300) #define PROFF_SMC2 ((uint)0x0380) diff --git a/arch/powerpc/platforms/8xx/micropatch.c b/arch/powerpc/platforms/8xx/micropatch.c index aed4bc75f352..aef179fcbd4f 100644 --- a/arch/powerpc/platforms/8xx/micropatch.c +++ b/arch/powerpc/platforms/8xx/micropatch.c @@ -360,6 +360,17 @@ void __init cpm_load_patch(cpm8xx_t *cp) if (IS_ENABLED(CONFIG_SMC_UCODE_PATCH)) { smc_uart_t *smp; + if (IS_ENABLED(CONFIG_PPC_EARLY_DEBUG_CPM)) { + int i; + + for (i = 0; i < sizeof(*smp); i += 4) { + u32 __iomem *src = (u32 __iomem *)&cp->cp_dparam[PROFF_SMC1 + i]; + u32 __iomem *dst = (u32 __iomem *)&cp->cp_dparam[PROFF_DSP1 + i]; + + out_be32(dst, in_be32(src)); + } + } + smp = (smc_uart_t *)&cp->cp_dparam[PROFF_SMC1]; out_be16(&smp->smc_rpbase, 0x1ec0); smp = (smc_uart_t *)&cp->cp_dparam[PROFF_SMC2]; -- 2.25.0
next reply other threads:[~2020-12-04 10:12 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-12-04 10:11 Christophe Leroy [this message] 2020-12-04 10:11 ` [PATCH] powerpc/8xx: Fix early debug when SMC1 is relocated Christophe Leroy 2020-12-15 10:48 ` Michael Ellerman 2020-12-15 10:48 ` Michael Ellerman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=b2f71f39eca543f1e4ec06596f09a8b12235c701.1607076683.git.christophe.leroy@csgroup.eu \ --to=christophe.leroy@csgroup.eu \ --cc=benh@kernel.crashing.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linuxppc-dev@lists.ozlabs.org \ --cc=mpe@ellerman.id.au \ --cc=paulus@samba.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.