All of lore.kernel.org
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Magnus Damm <magnus.damm@gmail.com>
Cc: linux-renesas-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH] arm64: dts: renesas: Align GPIO hog names with dtschema
Date: Thu, 24 Feb 2022 13:33:40 +0100	[thread overview]
Message-ID: <baee4b9980576ffbab24122fce7147c9cbc2ea59.1645705998.git.geert+renesas@glider.be> (raw)

Dtschema expects GPIO hogs to end with a "hog" suffix.
Also, the convention for node names is to use hyphens, not underscores.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
To be queued in renesas-devel for v5.18.
---
 arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi       | 2 +-
 arch/arm64/boot/dts/renesas/hihope-common.dtsi            | 2 +-
 arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi      | 2 +-
 arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts | 2 +-
 arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts         | 4 ++--
 arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi  | 4 ++--
 arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi | 2 +-
 7 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 17d5c4501bbe184c..877d076ffcc9bf92 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -77,7 +77,7 @@ &extalr_clk {
 };
 
 &gpio6 {
-	usb_hub_reset {
+	usb-hub-reset-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 0c7e6f79059020ff..935d06515aa6130b 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -140,7 +140,7 @@ &extalr_clk {
 };
 
 &gpio6 {
-	usb1-reset {
+	usb1-reset-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_LOW>;
 		output-low;
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
index 40c5e8d6d8418910..d66d17e34694c871 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
@@ -20,7 +20,7 @@ &gpio1 {
 	 * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
 	 * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
 	 */
-	lvds-connector-en-gpio {
+	lvds-connector-en-hog {
 		gpio-hog;
 		gpios = <20 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
index a7b27d09f6c25fa1..c1812d1ef06a302a 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
@@ -68,7 +68,7 @@ &gpio0 {
 	 * When GP0_17 is low LVDS[01] are connected to the LVDS connector
 	 * When GP0_17 is high LVDS[01] are connected to the LT8918L
 	 */
-	lvds-connector-en-gpio{
+	lvds-connector-en-hog {
 		gpio-hog;
 		gpios = <17 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
index 49d141db53f7af37..fc334b4c2aa422ee 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
@@ -18,8 +18,8 @@ / {
 };
 
 &pinctrl {
-	/delete-node/ can0-stb;
-	/delete-node/ can1-stb;
+	/delete-node/ can0-stb-hog;
+	/delete-node/ can1-stb-hog;
 	/delete-node/ gpio-sd0-pwr-en-hog;
 	/delete-node/ sd0-dev-sel-hog;
 	/delete-node/ sd1-pwr-en-hog;
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
index 2ef217445f72dae0..9085d8c76ce15452 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
@@ -18,7 +18,7 @@ can0_pins: can0 {
 	};
 
 	/* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */
-	can0-stb {
+	can0-stb-hog {
 		gpio-hog;
 		gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>;
 		output-low;
@@ -31,7 +31,7 @@ can1_pins: can1 {
 	};
 
 	/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
-	can1-stb {
+	can1-stb-hog {
 		gpio-hog;
 		gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
index bff56d69693667f1..37ff2091582ec966 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
@@ -34,7 +34,7 @@ scif1_pins: scif1 {
 
 #if SW_RSPI_CAN
 	/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
-	can1-stb {
+	can1-stb-hog {
 		gpio-hog;
 		gpios = <RZG2L_GPIO(44, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Magnus Damm <magnus.damm@gmail.com>
Cc: linux-renesas-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH] arm64: dts: renesas: Align GPIO hog names with dtschema
Date: Thu, 24 Feb 2022 13:33:40 +0100	[thread overview]
Message-ID: <baee4b9980576ffbab24122fce7147c9cbc2ea59.1645705998.git.geert+renesas@glider.be> (raw)

Dtschema expects GPIO hogs to end with a "hog" suffix.
Also, the convention for node names is to use hyphens, not underscores.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
To be queued in renesas-devel for v5.18.
---
 arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi       | 2 +-
 arch/arm64/boot/dts/renesas/hihope-common.dtsi            | 2 +-
 arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi      | 2 +-
 arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts | 2 +-
 arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts         | 4 ++--
 arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi  | 4 ++--
 arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi | 2 +-
 7 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 17d5c4501bbe184c..877d076ffcc9bf92 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -77,7 +77,7 @@ &extalr_clk {
 };
 
 &gpio6 {
-	usb_hub_reset {
+	usb-hub-reset-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 0c7e6f79059020ff..935d06515aa6130b 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -140,7 +140,7 @@ &extalr_clk {
 };
 
 &gpio6 {
-	usb1-reset {
+	usb1-reset-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_LOW>;
 		output-low;
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
index 40c5e8d6d8418910..d66d17e34694c871 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
@@ -20,7 +20,7 @@ &gpio1 {
 	 * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
 	 * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
 	 */
-	lvds-connector-en-gpio {
+	lvds-connector-en-hog {
 		gpio-hog;
 		gpios = <20 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
index a7b27d09f6c25fa1..c1812d1ef06a302a 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
@@ -68,7 +68,7 @@ &gpio0 {
 	 * When GP0_17 is low LVDS[01] are connected to the LVDS connector
 	 * When GP0_17 is high LVDS[01] are connected to the LT8918L
 	 */
-	lvds-connector-en-gpio{
+	lvds-connector-en-hog {
 		gpio-hog;
 		gpios = <17 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
index 49d141db53f7af37..fc334b4c2aa422ee 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
@@ -18,8 +18,8 @@ / {
 };
 
 &pinctrl {
-	/delete-node/ can0-stb;
-	/delete-node/ can1-stb;
+	/delete-node/ can0-stb-hog;
+	/delete-node/ can1-stb-hog;
 	/delete-node/ gpio-sd0-pwr-en-hog;
 	/delete-node/ sd0-dev-sel-hog;
 	/delete-node/ sd1-pwr-en-hog;
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
index 2ef217445f72dae0..9085d8c76ce15452 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
@@ -18,7 +18,7 @@ can0_pins: can0 {
 	};
 
 	/* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */
-	can0-stb {
+	can0-stb-hog {
 		gpio-hog;
 		gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>;
 		output-low;
@@ -31,7 +31,7 @@ can1_pins: can1 {
 	};
 
 	/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
-	can1-stb {
+	can1-stb-hog {
 		gpio-hog;
 		gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
index bff56d69693667f1..37ff2091582ec966 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
@@ -34,7 +34,7 @@ scif1_pins: scif1 {
 
 #if SW_RSPI_CAN
 	/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
-	can1-stb {
+	can1-stb-hog {
 		gpio-hog;
 		gpios = <RZG2L_GPIO(44, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2022-02-24 12:33 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-24 12:33 Geert Uytterhoeven [this message]
2022-02-24 12:33 ` [PATCH] arm64: dts: renesas: Align GPIO hog names with dtschema Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=baee4b9980576ffbab24122fce7147c9cbc2ea59.1645705998.git.geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.