All of lore.kernel.org
 help / color / mirror / Atom feed
From: Viresh Kumar <viresh.kumar@linaro.org>
To: Masahiro Yamada <masahiroy@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Frank Rowand <frowand.list@gmail.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>,
	Vincent Guittot <vincent.guittot@linaro.org>,
	David Gibson <david@gibson.dropbear.id.au>,
	Michal Simek <michal.simek@xilinx.com>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	anmar.oueja@linaro.org, Bill Mills <bill.mills@linaro.org>,
	Michal Marek <michal.lkml@markovi.net>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH V11 4/5] of: unittest: Create overlay_common.dtsi and testcases_common.dtsi
Date: Wed, 10 Mar 2021 11:05:32 +0530	[thread overview]
Message-ID: <c3354a042ba34a03fd563061cbaa7fc96cb2d71a.1615354376.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1615354376.git.viresh.kumar@linaro.org>

In order to build-test the same unit-test files using fdtoverlay tool,
move the device nodes from the existing overlay_base.dts and
testcases_common.dts files to .dtsi counterparts. The .dts files now
include the new .dtsi files, resulting in exactly the same behavior as
earlier.

The .dtsi files can now be reused for compile time tests using
fdtoverlay (will be done by a later commit).

This is required because the base files passed to fdtoverlay tool
shouldn't be overlays themselves (i.e. shouldn't have the /plugin/;
tag).

Note that this commit also moves "testcase-device2" node to
testcases.dts from tests-interrupts.dtsi, as this node has a deliberate
error in it and is only relevant for runtime testing done with
unittest.c.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/of/unittest-data/overlay_base.dts     | 90 +-----------------
 drivers/of/unittest-data/overlay_common.dtsi  | 91 +++++++++++++++++++
 drivers/of/unittest-data/testcases.dts        | 23 ++---
 .../of/unittest-data/testcases_common.dtsi    | 19 ++++
 .../of/unittest-data/tests-interrupts.dtsi    | 11 +--
 5 files changed, 128 insertions(+), 106 deletions(-)
 create mode 100644 drivers/of/unittest-data/overlay_common.dtsi
 create mode 100644 drivers/of/unittest-data/testcases_common.dtsi

diff --git a/drivers/of/unittest-data/overlay_base.dts b/drivers/of/unittest-data/overlay_base.dts
index 99ab9d12d00b..ab9014589c5d 100644
--- a/drivers/of/unittest-data/overlay_base.dts
+++ b/drivers/of/unittest-data/overlay_base.dts
@@ -2,92 +2,4 @@
 /dts-v1/;
 /plugin/;
 
-/*
- * Base device tree that overlays will be applied against.
- *
- * Do not add any properties in node "/".
- * Do not add any nodes other than "/testcase-data-2" in node "/".
- * Do not add anything that would result in dtc creating node "/__fixups__".
- * dtc will create nodes "/__symbols__" and "/__local_fixups__".
- */
-
-/ {
-	testcase-data-2 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		electric_1: substation@100 {
-			compatible = "ot,big-volts-control";
-			reg = < 0x00000100 0x100 >;
-			status = "disabled";
-
-			hvac_1: hvac-medium-1 {
-				compatible = "ot,hvac-medium";
-				heat-range = < 50 75 >;
-				cool-range = < 60 80 >;
-			};
-
-			spin_ctrl_1: motor-1 {
-				compatible = "ot,ferris-wheel-motor";
-				spin = "clockwise";
-				rpm_avail = < 50 >;
-			};
-
-			spin_ctrl_2: motor-8 {
-				compatible = "ot,roller-coaster-motor";
-			};
-		};
-
-		rides_1: fairway-1 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "ot,rides";
-			status = "disabled";
-			orientation = < 127 >;
-
-			ride@100 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "ot,roller-coaster";
-				reg = < 0x00000100 0x100 >;
-				hvac-provider = < &hvac_1 >;
-				hvac-thermostat = < 29 > ;
-				hvac-zones = < 14 >;
-				hvac-zone-names = "operator";
-				spin-controller = < &spin_ctrl_2 5 &spin_ctrl_2 7 >;
-				spin-controller-names = "track_1", "track_2";
-				queues = < 2 >;
-
-				track@30 {
-					reg = < 0x00000030 0x10 >;
-				};
-
-				track@40 {
-					reg = < 0x00000040 0x10 >;
-				};
-
-			};
-		};
-
-		lights_1: lights@30000 {
-			compatible = "ot,work-lights";
-			reg = < 0x00030000 0x1000 >;
-			status = "disabled";
-		};
-
-		lights_2: lights@40000 {
-			compatible = "ot,show-lights";
-			reg = < 0x00040000 0x1000 >;
-			status = "disabled";
-			rate = < 13 138 >;
-		};
-
-		retail_1: vending@50000 {
-			reg = < 0x00050000 0x1000 >;
-			compatible = "ot,tickets";
-			status = "disabled";
-		};
-
-	};
-};
-
+#include "overlay_common.dtsi"
diff --git a/drivers/of/unittest-data/overlay_common.dtsi b/drivers/of/unittest-data/overlay_common.dtsi
new file mode 100644
index 000000000000..08874a72556e
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_common.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Base device tree that overlays will be applied against.
+ *
+ * Do not add any properties in node "/".
+ * Do not add any nodes other than "/testcase-data-2" in node "/".
+ * Do not add anything that would result in dtc creating node "/__fixups__".
+ * dtc will create nodes "/__symbols__" and "/__local_fixups__".
+ */
+
+/ {
+	testcase-data-2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		electric_1: substation@100 {
+			compatible = "ot,big-volts-control";
+			reg = < 0x00000100 0x100 >;
+			status = "disabled";
+
+			hvac_1: hvac-medium-1 {
+				compatible = "ot,hvac-medium";
+				heat-range = < 50 75 >;
+				cool-range = < 60 80 >;
+			};
+
+			spin_ctrl_1: motor-1 {
+				compatible = "ot,ferris-wheel-motor";
+				spin = "clockwise";
+				rpm_avail = < 50 >;
+			};
+
+			spin_ctrl_2: motor-8 {
+				compatible = "ot,roller-coaster-motor";
+			};
+		};
+
+		rides_1: fairway-1 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "ot,rides";
+			status = "disabled";
+			orientation = < 127 >;
+
+			ride@100 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "ot,roller-coaster";
+				reg = < 0x00000100 0x100 >;
+				hvac-provider = < &hvac_1 >;
+				hvac-thermostat = < 29 > ;
+				hvac-zones = < 14 >;
+				hvac-zone-names = "operator";
+				spin-controller = < &spin_ctrl_2 5 &spin_ctrl_2 7 >;
+				spin-controller-names = "track_1", "track_2";
+				queues = < 2 >;
+
+				track@30 {
+					reg = < 0x00000030 0x10 >;
+				};
+
+				track@40 {
+					reg = < 0x00000040 0x10 >;
+				};
+
+			};
+		};
+
+		lights_1: lights@30000 {
+			compatible = "ot,work-lights";
+			reg = < 0x00030000 0x1000 >;
+			status = "disabled";
+		};
+
+		lights_2: lights@40000 {
+			compatible = "ot,show-lights";
+			reg = < 0x00040000 0x1000 >;
+			status = "disabled";
+			rate = < 13 138 >;
+		};
+
+		retail_1: vending@50000 {
+			reg = < 0x00050000 0x1000 >;
+			compatible = "ot,tickets";
+			status = "disabled";
+		};
+
+	};
+};
+
diff --git a/drivers/of/unittest-data/testcases.dts b/drivers/of/unittest-data/testcases.dts
index a85b5e1c381a..61cdd3d5fccb 100644
--- a/drivers/of/unittest-data/testcases.dts
+++ b/drivers/of/unittest-data/testcases.dts
@@ -2,19 +2,20 @@
 /dts-v1/;
 /plugin/;
 
+#include "testcases_common.dtsi"
+
 / {
+	/*
+	 * testcase data that intentionally results in an error is located here
+	 * instead of in testcases_common.dtsi so that the static overlay apply
+	 * tests will not include the error.
+	 */
 	testcase-data {
-		changeset {
-			prop-update = "hello";
-			prop-remove = "world";
-			node-remove {
-			};
+		testcase-device2 {
+			compatible = "testcase-device";
+			interrupt-parent = <&test_intc2>;
+			interrupts = <1>; /* invalid specifier - too short */
 		};
 	};
+
 };
-#include "tests-phandle.dtsi"
-#include "tests-interrupts.dtsi"
-#include "tests-match.dtsi"
-#include "tests-address.dtsi"
-#include "tests-platform.dtsi"
-#include "tests-overlay.dtsi"
diff --git a/drivers/of/unittest-data/testcases_common.dtsi b/drivers/of/unittest-data/testcases_common.dtsi
new file mode 100644
index 000000000000..19292bbb4cbb
--- /dev/null
+++ b/drivers/of/unittest-data/testcases_common.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	testcase-data {
+		changeset {
+			prop-update = "hello";
+			prop-remove = "world";
+			node-remove {
+			};
+		};
+	};
+};
+
+#include "tests-phandle.dtsi"
+#include "tests-interrupts.dtsi"
+#include "tests-match.dtsi"
+#include "tests-address.dtsi"
+#include "tests-platform.dtsi"
+#include "tests-overlay.dtsi"
diff --git a/drivers/of/unittest-data/tests-interrupts.dtsi b/drivers/of/unittest-data/tests-interrupts.dtsi
index ec175e800725..9b60a549f502 100644
--- a/drivers/of/unittest-data/tests-interrupts.dtsi
+++ b/drivers/of/unittest-data/tests-interrupts.dtsi
@@ -62,11 +62,10 @@ testcase-device1 {
 			interrupts = <1>;
 		};
 
-		testcase-device2 {
-			compatible = "testcase-device";
-			interrupt-parent = <&test_intc2>;
-			interrupts = <1>; /* invalid specifier - too short */
-		};
+		/*
+		 * testcase data that intentionally results in an error is
+		 * located in testcases.dts instead of in this file so that the
+		 * static overlay apply tests will not include the error.
+		 */
 	};
-
 };
-- 
2.25.0.rc1.19.g042ed3e048af


  parent reply	other threads:[~2021-03-10  5:36 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-10  5:35 [PATCH V11 0/5] dt: Add fdtoverlay rule and statically build unittest Viresh Kumar
2021-03-10  5:35 ` [PATCH V11 1/5] kbuild: Simplify builds with CONFIG_OF_ALL_DTBS Viresh Kumar
2021-03-10  5:35 ` [PATCH V11 2/5] kbuild: Add generic rule to apply fdtoverlay Viresh Kumar
2021-03-10  5:35 ` [PATCH V11 3/5] kbuild: Allow .dtso format for overlay source files Viresh Kumar
2021-03-10 11:24   ` Masahiro Yamada
2021-03-10 11:29     ` Masahiro Yamada
2021-03-10 14:48       ` Viresh Kumar
2021-03-10 15:18         ` Masahiro Yamada
2021-03-12  3:52           ` Viresh Kumar
2021-03-10 14:47     ` Viresh Kumar
2021-03-10 15:15       ` Masahiro Yamada
2021-03-10 22:42         ` Frank Rowand
2021-03-12  4:47     ` Viresh Kumar
2021-03-12  7:03       ` Frank Rowand
2021-03-12  7:09         ` Frank Rowand
2021-03-12  7:13           ` Viresh Kumar
2021-03-13  5:11             ` Frank Rowand
2021-03-15  1:16               ` Frank Rowand
2021-03-15  6:40                 ` Viresh Kumar
2021-03-15 17:43                   ` Masahiro Yamada
2021-03-15 22:12                     ` Laurent Pinchart
2021-03-16  5:39                       ` Frank Rowand
2021-03-16  8:01                         ` Geert Uytterhoeven
2021-04-09  6:03                           ` Masahiro Yamada
2021-03-16  5:27                     ` Viresh Kumar
2021-03-16  5:36                   ` Frank Rowand
2021-03-16  5:42                     ` Viresh Kumar
2021-03-24  7:34                       ` Frank Rowand
2021-03-24 22:45                         ` Frank Rowand
2021-03-10  5:35 ` Viresh Kumar [this message]
2021-03-10  5:35 ` [PATCH V11 5/5] of: unittest: Statically apply overlays using fdtoverlay Viresh Kumar
2021-03-11 23:27 ` [PATCH V11 0/5] dt: Add fdtoverlay rule and statically build unittest Frank Rowand
2021-03-12  4:31   ` Viresh Kumar
2021-03-12  6:46     ` Frank Rowand
2021-03-12  4:32 ` Viresh Kumar
2021-03-15 17:13 ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c3354a042ba34a03fd563061cbaa7fc96cb2d71a.1615354376.git.viresh.kumar@linaro.org \
    --to=viresh.kumar@linaro.org \
    --cc=anmar.oueja@linaro.org \
    --cc=bill.mills@linaro.org \
    --cc=david@gibson.dropbear.id.au \
    --cc=devicetree@vger.kernel.org \
    --cc=frowand.list@gmail.com \
    --cc=geert@linux-m68k.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=masahiroy@kernel.org \
    --cc=michal.lkml@markovi.net \
    --cc=michal.simek@xilinx.com \
    --cc=robh+dt@kernel.org \
    --cc=vincent.guittot@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.