From: Christian Lamparter <chunkeey@gmail.com> To: devicetree@vger.kernel.org, linux-wireless@vger.kernel.org, ath10k@lists.infradead.org Cc: kvalo@kernel.org, conor+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, robh+dt@kernel.org Subject: [PATCH v2] dt-bindings: net: wireless: ath10k: add ieee80211-freq-limit property Date: Sun, 11 Jun 2023 14:37:30 +0200 [thread overview] Message-ID: <c33c928b7c6c9bb4e7abe84eb8df9f440add275b.1686486464.git.chunkeey@gmail.com> (raw) In-Reply-To: <288fc9a0db6c292bc132e828611c41785b075078.1686486461.git.chunkeey@gmail.com> This is an existing optional property that ieee80211.yaml/cfg80211 provides. It's useful to further restrict supported frequencies for a specified device through device-tree. For testing the addition, I added the ieee80211-freq-limit property with values from an OpenMesh A62 device. This is because the OpenMesh A62 has "special filters in front of the RX+TX paths to the 5GHz PHYs. These filtered channel can in theory still be used by the hardware but the signal strength is reduced so much that it makes no sense." The driver supported this since ~2018 by commit 34d5629d2ca8 ("ath10k: limit available channels via DT ieee80211-freq-limit") Link: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=e3b8ae2b09e137ce2eae33551923daf302293a0c Signed-off-by: Christian Lamparter <chunkeey@gmail.com> --- v1->v2: - AllOf is a list. So add it to the existing one? - added example with link to vendor hardware reason notes about the filtering --- .../devicetree/bindings/net/wireless/qcom,ath10k.yaml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml index c85ed330426d..7758a55dd328 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml @@ -84,6 +84,8 @@ properties: required: - iommus + ieee80211-freq-limit: true + qcom,ath10k-calibration-data: $ref: /schemas/types.yaml#/definitions/uint8-array description: @@ -164,6 +166,7 @@ required: additionalProperties: false allOf: + - $ref: ieee80211.yaml# - if: properties: compatible: @@ -355,4 +358,5 @@ examples: "msi14", "msi15", "legacy"; + ieee80211-freq-limit = <5470000 5875000>; }; -- 2.40.1
WARNING: multiple messages have this Message-ID (diff)
From: Christian Lamparter <chunkeey@gmail.com> To: devicetree@vger.kernel.org, linux-wireless@vger.kernel.org, ath10k@lists.infradead.org Cc: kvalo@kernel.org, conor+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, robh+dt@kernel.org Subject: [PATCH v2] dt-bindings: net: wireless: ath10k: add ieee80211-freq-limit property Date: Sun, 11 Jun 2023 14:37:30 +0200 [thread overview] Message-ID: <c33c928b7c6c9bb4e7abe84eb8df9f440add275b.1686486464.git.chunkeey@gmail.com> (raw) In-Reply-To: <288fc9a0db6c292bc132e828611c41785b075078.1686486461.git.chunkeey@gmail.com> This is an existing optional property that ieee80211.yaml/cfg80211 provides. It's useful to further restrict supported frequencies for a specified device through device-tree. For testing the addition, I added the ieee80211-freq-limit property with values from an OpenMesh A62 device. This is because the OpenMesh A62 has "special filters in front of the RX+TX paths to the 5GHz PHYs. These filtered channel can in theory still be used by the hardware but the signal strength is reduced so much that it makes no sense." The driver supported this since ~2018 by commit 34d5629d2ca8 ("ath10k: limit available channels via DT ieee80211-freq-limit") Link: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=e3b8ae2b09e137ce2eae33551923daf302293a0c Signed-off-by: Christian Lamparter <chunkeey@gmail.com> --- v1->v2: - AllOf is a list. So add it to the existing one? - added example with link to vendor hardware reason notes about the filtering --- .../devicetree/bindings/net/wireless/qcom,ath10k.yaml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml index c85ed330426d..7758a55dd328 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml @@ -84,6 +84,8 @@ properties: required: - iommus + ieee80211-freq-limit: true + qcom,ath10k-calibration-data: $ref: /schemas/types.yaml#/definitions/uint8-array description: @@ -164,6 +166,7 @@ required: additionalProperties: false allOf: + - $ref: ieee80211.yaml# - if: properties: compatible: @@ -355,4 +358,5 @@ examples: "msi14", "msi15", "legacy"; + ieee80211-freq-limit = <5470000 5875000>; }; -- 2.40.1 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2023-06-11 12:37 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-06-11 12:37 [PATCH v1] dt-bindings: net: wireless: bcm4329-fmac: add ieee80211-freq-limit property Christian Lamparter 2023-06-11 12:37 ` Christian Lamparter [this message] 2023-06-11 12:37 ` [PATCH v2] dt-bindings: net: wireless: ath10k: " Christian Lamparter 2023-06-12 8:42 ` Krzysztof Kozlowski 2023-06-12 8:42 ` Krzysztof Kozlowski 2023-06-16 16:17 ` Kalle Valo 2023-06-16 16:17 ` Kalle Valo 2023-06-11 12:37 ` [PATCH v2 1/2] dt-bindings: net: wireless: ath11k: " Christian Lamparter 2023-06-11 12:37 ` Christian Lamparter 2023-06-11 12:37 ` [PATCH v2 2/2] wifi: ath11k: add support DT ieee80211-freq-limit Christian Lamparter 2023-06-11 12:37 ` Christian Lamparter 2023-06-12 8:41 ` [PATCH v2 1/2] dt-bindings: net: wireless: ath11k: add ieee80211-freq-limit property Krzysztof Kozlowski 2023-06-12 8:41 ` Krzysztof Kozlowski 2024-04-18 15:19 ` Kalle Valo 2023-06-12 8:42 ` [PATCH v1] dt-bindings: net: wireless: bcm4329-fmac: " Krzysztof Kozlowski 2023-06-12 18:23 ` Rafał Miłecki
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=c33c928b7c6c9bb4e7abe84eb8df9f440add275b.1686486464.git.chunkeey@gmail.com \ --to=chunkeey@gmail.com \ --cc=ath10k@lists.infradead.org \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=kvalo@kernel.org \ --cc=linux-wireless@vger.kernel.org \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.