From: Simon Horman <horms+renesas@verge.net.au>
To: linux-renesas-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
Magnus Damm <magnus.damm@gmail.com>,
Simon Horman <horms+renesas@verge.net.au>
Subject: [PATCH 27/42] ARM: dts: r8a7793: Use R-Car GPIO Gen2 fallback compat string
Date: Fri, 20 Oct 2017 12:28:54 +0200 [thread overview]
Message-ID: <c37417dca041d76a66a78012f93e9a3c879706c4.1508493785.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1508493785.git.horms+renesas@verge.net.au>
Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7793 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat string.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7793.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index aa19b93494bf..76418c375a10 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -115,7 +115,7 @@
};
gpio0: gpio@e6050000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6050000 0 0x50>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -129,7 +129,7 @@
};
gpio1: gpio@e6051000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6051000 0 0x50>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -143,7 +143,7 @@
};
gpio2: gpio@e6052000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6052000 0 0x50>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -157,7 +157,7 @@
};
gpio3: gpio@e6053000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6053000 0 0x50>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -171,7 +171,7 @@
};
gpio4: gpio@e6054000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6054000 0 0x50>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -185,7 +185,7 @@
};
gpio5: gpio@e6055000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6055000 0 0x50>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -199,7 +199,7 @@
};
gpio6: gpio@e6055400 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6055400 0 0x50>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -213,7 +213,7 @@
};
gpio7: gpio@e6055800 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6055800 0 0x50>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: horms+renesas@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 27/42] ARM: dts: r8a7793: Use R-Car GPIO Gen2 fallback compat string
Date: Fri, 20 Oct 2017 12:28:54 +0200 [thread overview]
Message-ID: <c37417dca041d76a66a78012f93e9a3c879706c4.1508493785.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1508493785.git.horms+renesas@verge.net.au>
Use newly added R-Car GPIO Gen2 fallback compat string
in place of now deprecated non-generation specific
R-Car GPIO fallback compat string in the DT of the r8a7793 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before considering the fallback compat string.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7793.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index aa19b93494bf..76418c375a10 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -115,7 +115,7 @@
};
gpio0: gpio at e6050000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6050000 0 0x50>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -129,7 +129,7 @@
};
gpio1: gpio at e6051000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6051000 0 0x50>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -143,7 +143,7 @@
};
gpio2: gpio at e6052000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6052000 0 0x50>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -157,7 +157,7 @@
};
gpio3: gpio at e6053000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6053000 0 0x50>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -171,7 +171,7 @@
};
gpio4: gpio at e6054000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6054000 0 0x50>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -185,7 +185,7 @@
};
gpio5: gpio at e6055000 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6055000 0 0x50>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -199,7 +199,7 @@
};
gpio6: gpio at e6055400 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6055400 0 0x50>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
@@ -213,7 +213,7 @@
};
gpio7: gpio at e6055800 {
- compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+ compatible = "renesas,gpio-r8a7793", "renesas,rcar-gen2-gpio";
reg = <0 0xe6055800 0 0x50>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
--
2.11.0
next prev parent reply other threads:[~2017-10-20 10:30 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-20 10:29 [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.15 Simon Horman
2017-10-20 10:29 ` Simon Horman
2017-10-20 10:28 ` [PATCH 01/42] ARM: dts: gr-peach: Fix 'leds' node name indent Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 02/42] ARM: dts: gr-peach: Enable MTU2 timer pulse unit Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 03/42] ARM: dts: r8a7790: Use generic node name for VSP1 nodes Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 04/42] ARM: dts: r8a7791: " Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 05/42] ARM: dts: r8a7792: " Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 06/42] ARM: dts: r8a7794: " Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 07/42] ARM: dts: iwg20d-q7: Rework DT architecture Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 08/42] ARM: dts: iwg20d-q7-dbcm-ca: Add device trees for camera DB Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 09/42] ARM: dts: r8a7790: add cpu capacity-dmips-mhz information Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 10/42] ARM: dts: r8a7745: Add internal PCI bridge nodes Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 11/42] ARM: dts: r8a7745: Add USB PHY DT support Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 12/42] ARM: dts: r8a7745: Link PCI USB devices to USB PHY Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 13/42] ARM: dts: iwg22d-sodimm: Enable internal PCI Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 14/42] ARM: dts: iwg22d-sodimm: Enable USB PHY Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 15/42] ARM: dts: r8a7743: Add HS-USB device node Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 16/42] ARM: dts: iwg20d-q7: Enable HS-USB Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 17/42] ARM: dts: r8a7743: Add USB-DMAC device nodes Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 18/42] ARM: dts: r8a7743: Enable DMA for HSUSB Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 19/42] ARM: dts: gr-peach: Add ETHER pin group Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 20/42] ARM: dts: gr-peach: Enable ostm0 and ostm1 timers Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 21/42] ARM: dts: r8a7778: Use R-Car GPIO Gen1 fallback compat string Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 22/42] ARM: dts: r8a7779: " Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 23/42] ARM: dts: r8a7743: Use R-Car GPIO Gen2 " Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 24/42] ARM: dts: r8a7790: " Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 25/42] ARM: dts: r8a7791: " Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 26/42] ARM: dts: r8a7792: " Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` Simon Horman [this message]
2017-10-20 10:28 ` [PATCH 27/42] ARM: dts: r8a7793: " Simon Horman
2017-10-20 10:28 ` [PATCH 28/42] ARM: dts: r8a7794: " Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 29/42] ARM: dts: r8a73a4: Add clock for CA15 CPU0 core Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 30/42] ARM: dts: r8a7743: Add missing clock for secondary CA15 CPU core Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 31/42] ARM: dts: r8a7778: Add clock for CA9 " Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:28 ` [PATCH 32/42] ARM: dts: r8a7779: Add clocks for CA9 CPU cores Simon Horman
2017-10-20 10:28 ` Simon Horman
2017-10-20 10:29 ` [PATCH 33/42] ARM: dts: r8a7790: Add missing clocks for secondary CA15 " Simon Horman
2017-10-20 10:29 ` Simon Horman
2017-10-20 10:29 ` [PATCH 34/42] ARM: dts: r8a7790: Add clocks for CA7 " Simon Horman
2017-10-20 10:29 ` Simon Horman
2017-10-20 10:29 ` [PATCH 35/42] ARM: dts: r8a7791: Add missing clock for secondary CA15 CPU core Simon Horman
2017-10-20 10:29 ` Simon Horman
2017-10-20 10:29 ` [PATCH 36/42] ARM: dts: r8a7792: " Simon Horman
2017-10-20 10:29 ` Simon Horman
2017-10-20 10:29 ` [PATCH 37/42] ARM: dts: r8a7793: " Simon Horman
2017-10-20 10:29 ` Simon Horman
2017-10-20 10:29 ` [PATCH 38/42] ARM: dts: r8a7794: Add missing clock for secondary CA7 " Simon Horman
2017-10-20 10:29 ` Simon Horman
2017-10-20 10:29 ` [PATCH 39/42] ARM: dts: sh73a0: Add clocks for CA9 CPU cores Simon Horman
2017-10-20 10:29 ` Simon Horman
2017-10-20 10:29 ` [PATCH 40/42] dt-bindings: clk: r7s72100: Add missing I and G clocks Simon Horman
2017-10-20 10:29 ` Simon Horman
2017-10-20 10:29 ` [PATCH 41/42] ARM: dts: r7s72100: Add clock for CA9 CPU core Simon Horman
2017-10-20 10:29 ` Simon Horman
2017-10-20 10:29 ` [PATCH 42/42] ARM: dts: r8a7743: Add xhci support to SoC dtsi Simon Horman
2017-10-20 10:29 ` Simon Horman
2017-10-30 11:04 ` [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.15 Arnd Bergmann
2017-10-30 11:04 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c37417dca041d76a66a78012f93e9a3c879706c4.1508493785.git.horms+renesas@verge.net.au \
--to=horms+renesas@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.