[PATCH 2/2] usb/usbip: Fix v_recv_cmd_submit() to use PIPE_BULK define

[Shuah Khan <skhan@linuxfoundation.org>]

Fix v_recv_cmd_submit() to use PIPE_BULK define instead of hard coded
values. This also fixes the following signed integer overflow error
reported by cppcheck. This is not an issue since pipe is unsigned int.
However, this change improves the code to use proper define.

drivers/usb/usbip/vudc_rx.c:152:26: error: Signed integer overflow for expression '3<<30'. [integerOverflow]
 urb_p->urb->pipe &= ~(3 << 30);

In addition, add a sanity check for PIPE_BULK != 3 as the code path depends
on PIPE_BULK = 3.

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
---
 drivers/usb/usbip/vudc_rx.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/usbip/vudc_rx.c b/drivers/usb/usbip/vudc_rx.c
index a6ca27f10b68..e7e0eb6bbca0 100644
--- a/drivers/usb/usbip/vudc_rx.c
+++ b/drivers/usb/usbip/vudc_rx.c
@@ -149,7 +149,10 @@ static int v_recv_cmd_submit(struct vudc *udc,
 	urb_p->urb->status = -EINPROGRESS;
 
 	/* FIXME: more pipe setup to please usbip_common */
-	urb_p->urb->pipe &= ~(3 << 30);
+#if PIPE_BULK != 3
+#error "Sanity check failed, this code presumes PIPE_... to range from 0 to 3"
+#endif
+	urb_p->urb->pipe &= ~(PIPE_BULK << 30);
 	switch (urb_p->ep->type) {
 	case USB_ENDPOINT_XFER_BULK:
 		urb_p->urb->pipe |= (PIPE_BULK << 30);
-- 
2.34.1