From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH] arm64: defconfig: Enable additional support for Renesas platforms Date: Fri, 28 Jan 2022 13:34:55 +0100 [thread overview] Message-ID: <c9800d67f91a90d418a3ce44c59109ae0a87b2d8.1643373223.git.geert+renesas@glider.be> (raw) Increase build and test coverage by enabling support for more hardware present on Renesas SoCs and boards: - Renesas RSPI, RZ/G2L thermal, RZ/G2L WDT watchdog, and OSTM timer, as used on the RZ/G2L SMARC EVK board, - R-Car Image Signal Processor (ISP) and Display Unit embedded MIPI DSI encoder on R-Car V3U, as used on the Falcon board. All of the above are modular, except for thermal, watchdog, and timer. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- To be queued in renesas-devel for v5.18. arch/arm64/configs/defconfig | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 92635ca9f635bb60..46ccecad89c52e4b 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -487,6 +487,7 @@ CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y CONFIG_SPI_ROCKCHIP=y CONFIG_SPI_RPCIF=m +CONFIG_SPI_RSPI=m CONFIG_SPI_QCOM_QSPI=m CONFIG_SPI_QUP=y CONFIG_SPI_QCOM_GENI=m @@ -576,6 +577,7 @@ CONFIG_IMX8MM_THERMAL=m CONFIG_ROCKCHIP_THERMAL=m CONFIG_RCAR_THERMAL=y CONFIG_RCAR_GEN3_THERMAL=y +CONFIG_RZG2L_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_BCM2711_THERMAL=m CONFIG_BCM2835_THERMAL=m @@ -601,6 +603,7 @@ CONFIG_QCOM_WDT=m CONFIG_MESON_GXBB_WATCHDOG=m CONFIG_MESON_WATCHDOG=m CONFIG_RENESAS_WDT=y +CONFIG_RENESAS_RZG2LWDT=y CONFIG_UNIPHIER_WATCHDOG=y CONFIG_BCM2835_WDT=y CONFIG_MFD_ALTERA_SYSMGR=y @@ -662,6 +665,7 @@ CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_RCAR_CSI2=m CONFIG_VIDEO_RCAR_VIN=m CONFIG_VIDEO_SUN6I_CSI=m +CONFIG_VIDEO_RCAR_ISP=m CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m @@ -696,6 +700,7 @@ CONFIG_ROCKCHIP_INNO_HDMI=y CONFIG_ROCKCHIP_LVDS=y CONFIG_DRM_RCAR_DU=m CONFIG_DRM_RCAR_DW_HDMI=m +CONFIG_DRM_RCAR_MIPI_DSI=m CONFIG_DRM_SUN4I=m CONFIG_DRM_SUN6I_DSI=m CONFIG_DRM_SUN8I_DW_HDMI=m @@ -1022,6 +1027,7 @@ CONFIG_CLK_GFM_LPASS_SM8250=m CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y +CONFIG_RENESAS_OSTM=y CONFIG_ARM_MHU=y CONFIG_IMX_MBOX=y CONFIG_PLATFORM_MHU=y -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH] arm64: defconfig: Enable additional support for Renesas platforms Date: Fri, 28 Jan 2022 13:34:55 +0100 [thread overview] Message-ID: <c9800d67f91a90d418a3ce44c59109ae0a87b2d8.1643373223.git.geert+renesas@glider.be> (raw) Increase build and test coverage by enabling support for more hardware present on Renesas SoCs and boards: - Renesas RSPI, RZ/G2L thermal, RZ/G2L WDT watchdog, and OSTM timer, as used on the RZ/G2L SMARC EVK board, - R-Car Image Signal Processor (ISP) and Display Unit embedded MIPI DSI encoder on R-Car V3U, as used on the Falcon board. All of the above are modular, except for thermal, watchdog, and timer. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- To be queued in renesas-devel for v5.18. arch/arm64/configs/defconfig | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 92635ca9f635bb60..46ccecad89c52e4b 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -487,6 +487,7 @@ CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y CONFIG_SPI_ROCKCHIP=y CONFIG_SPI_RPCIF=m +CONFIG_SPI_RSPI=m CONFIG_SPI_QCOM_QSPI=m CONFIG_SPI_QUP=y CONFIG_SPI_QCOM_GENI=m @@ -576,6 +577,7 @@ CONFIG_IMX8MM_THERMAL=m CONFIG_ROCKCHIP_THERMAL=m CONFIG_RCAR_THERMAL=y CONFIG_RCAR_GEN3_THERMAL=y +CONFIG_RZG2L_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_BCM2711_THERMAL=m CONFIG_BCM2835_THERMAL=m @@ -601,6 +603,7 @@ CONFIG_QCOM_WDT=m CONFIG_MESON_GXBB_WATCHDOG=m CONFIG_MESON_WATCHDOG=m CONFIG_RENESAS_WDT=y +CONFIG_RENESAS_RZG2LWDT=y CONFIG_UNIPHIER_WATCHDOG=y CONFIG_BCM2835_WDT=y CONFIG_MFD_ALTERA_SYSMGR=y @@ -662,6 +665,7 @@ CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_RCAR_CSI2=m CONFIG_VIDEO_RCAR_VIN=m CONFIG_VIDEO_SUN6I_CSI=m +CONFIG_VIDEO_RCAR_ISP=m CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m CONFIG_VIDEO_SAMSUNG_S5P_MFC=m @@ -696,6 +700,7 @@ CONFIG_ROCKCHIP_INNO_HDMI=y CONFIG_ROCKCHIP_LVDS=y CONFIG_DRM_RCAR_DU=m CONFIG_DRM_RCAR_DW_HDMI=m +CONFIG_DRM_RCAR_MIPI_DSI=m CONFIG_DRM_SUN4I=m CONFIG_DRM_SUN6I_DSI=m CONFIG_DRM_SUN8I_DW_HDMI=m @@ -1022,6 +1027,7 @@ CONFIG_CLK_GFM_LPASS_SM8250=m CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y +CONFIG_RENESAS_OSTM=y CONFIG_ARM_MHU=y CONFIG_IMX_MBOX=y CONFIG_PLATFORM_MHU=y -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-01-28 12:35 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-01-28 12:34 Geert Uytterhoeven [this message] 2022-01-28 12:34 ` [PATCH] arm64: defconfig: Enable additional support for Renesas platforms Geert Uytterhoeven -- strict thread matches above, loose matches on Subject: below -- 2022-08-22 10:00 Geert Uytterhoeven 2022-08-22 10:00 ` Geert Uytterhoeven 2020-06-30 17:15 Geert Uytterhoeven 2020-06-30 17:15 ` Geert Uytterhoeven 2020-02-17 10:32 Geert Uytterhoeven 2020-02-17 10:32 ` Geert Uytterhoeven 2020-02-17 12:51 ` Niklas Söderlund 2020-02-17 12:51 ` Niklas Söderlund
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=c9800d67f91a90d418a3ce44c59109ae0a87b2d8.1643373223.git.geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=catalin.marinas@arm.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.