All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: matti.vaittinen@fi.rohmeurope.com, mazziesaccount@gmail.com
Cc: Lee Jones <lee.jones@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-power@fi.rohmeurope.com, linux-watchdog@vger.kernel.org
Subject: [PATCH v6 2/4] mfd: Support ROHM BD9576MUF and BD9573MUF
Date: Thu, 12 Nov 2020 09:11:28 +0200	[thread overview]
Message-ID: <cc46e329efa30c66f000ab7c97f9bbf0bc31f0f7.1605164323.git.matti.vaittinen@fi.rohmeurope.com> (raw)
In-Reply-To: <cover.1605164323.git.matti.vaittinen@fi.rohmeurope.com>

Add core support for ROHM BD9576MUF and BD9573MUF PMICs which are
mainly used to power the R-Car series processors.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---
 drivers/mfd/Kconfig              |  11 ++++
 drivers/mfd/Makefile             |   1 +
 drivers/mfd/rohm-bd9576.c        | 108 +++++++++++++++++++++++++++++++
 include/linux/mfd/rohm-bd957x.h  |  59 +++++++++++++++++
 include/linux/mfd/rohm-generic.h |   2 +
 5 files changed, 181 insertions(+)
 create mode 100644 drivers/mfd/rohm-bd9576.c
 create mode 100644 include/linux/mfd/rohm-bd957x.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 8b99a13669bf..dcb2b14a570e 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2010,6 +2010,17 @@ config MFD_ROHM_BD71828
 	  Also included is a Coulomb counter, a real-time clock (RTC), and
 	  a 32.768 kHz clock gate.
 
+config MFD_ROHM_BD957XMUF
+	tristate "ROHM BD9576MUF and BD9573MUF Power Management ICs"
+	depends on I2C=y
+	depends on OF
+	select REGMAP_I2C
+	select MFD_CORE
+	help
+	  Select this option to get support for the ROHM BD9576MUF and
+	  BD9573MUF Power Management ICs. BD9576 and BD9573 are primarily
+	  designed to be used to power R-Car series processors.
+
 config MFD_STM32_LPTIMER
 	tristate "Support for STM32 Low-Power Timer"
 	depends on (ARCH_STM32 && OF) || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 1780019d2474..837f68c9f336 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -261,6 +261,7 @@ obj-$(CONFIG_RAVE_SP_CORE)	+= rave-sp.o
 obj-$(CONFIG_MFD_ROHM_BD70528)	+= rohm-bd70528.o
 obj-$(CONFIG_MFD_ROHM_BD71828)	+= rohm-bd71828.o
 obj-$(CONFIG_MFD_ROHM_BD718XX)	+= rohm-bd718x7.o
+obj-$(CONFIG_MFD_ROHM_BD957XMUF)	+= rohm-bd9576.o
 obj-$(CONFIG_MFD_STMFX) 	+= stmfx.o
 obj-$(CONFIG_MFD_KHADAS_MCU) 	+= khadas-mcu.o
 
diff --git a/drivers/mfd/rohm-bd9576.c b/drivers/mfd/rohm-bd9576.c
new file mode 100644
index 000000000000..f4dd9e438427
--- /dev/null
+++ b/drivers/mfd/rohm-bd9576.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// Copyright (C) 2020 ROHM Semiconductors
+//
+// ROHM BD9576MUF and BD9573MUF PMIC driver
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rohm-bd957x.h>
+#include <linux/mfd/rohm-generic.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+static struct mfd_cell bd9573_mfd_cells[] = {
+	{ .name = "bd9573-pmic", },
+	{ .name = "bd9576-wdt", },
+};
+
+static struct mfd_cell bd9576_mfd_cells[] = {
+	{ .name = "bd9576-pmic", },
+	{ .name = "bd9576-wdt", },
+};
+
+static const struct regmap_range volatile_ranges[] = {
+	regmap_reg_range(BD957X_REG_SMRB_ASSERT, BD957X_REG_SMRB_ASSERT),
+	regmap_reg_range(BD957X_REG_PMIC_INTERNAL_STAT,
+			 BD957X_REG_PMIC_INTERNAL_STAT),
+	regmap_reg_range(BD957X_REG_INT_THERM_STAT, BD957X_REG_INT_THERM_STAT),
+	regmap_reg_range(BD957X_REG_INT_OVP_STAT, BD957X_REG_INT_SYS_STAT),
+	regmap_reg_range(BD957X_REG_INT_MAIN_STAT, BD957X_REG_INT_MAIN_STAT),
+};
+
+static const struct regmap_access_table volatile_regs = {
+	.yes_ranges = &volatile_ranges[0],
+	.n_yes_ranges = ARRAY_SIZE(volatile_ranges),
+};
+
+static struct regmap_config bd957x_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_table = &volatile_regs,
+	.max_register = BD957X_MAX_REGISTER,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static int bd957x_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	int ret;
+	struct regmap *regmap;
+	struct mfd_cell *mfd;
+	int cells;
+	unsigned long chip_type;
+
+	chip_type = (unsigned long)of_device_get_match_data(&i2c->dev);
+
+	switch (chip_type) {
+	case ROHM_CHIP_TYPE_BD9576:
+		mfd = bd9576_mfd_cells;
+		cells = ARRAY_SIZE(bd9576_mfd_cells);
+		break;
+	case ROHM_CHIP_TYPE_BD9573:
+		mfd = bd9573_mfd_cells;
+		cells = ARRAY_SIZE(bd9573_mfd_cells);
+		break;
+	default:
+		dev_err(&i2c->dev, "Unknown device type");
+		return -EINVAL;
+	}
+
+	regmap = devm_regmap_init_i2c(i2c, &bd957x_regmap);
+	if (IS_ERR(regmap)) {
+		dev_err(&i2c->dev, "Failed to initialize Regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, mfd, cells,
+				   NULL, 0, NULL);
+	if (ret)
+		dev_err(&i2c->dev, "Failed to create subdevices\n");
+
+	return ret;
+}
+
+static const struct of_device_id bd957x_of_match[] = {
+	{ .compatible = "rohm,bd9576", .data = (void *)ROHM_CHIP_TYPE_BD9576, },
+	{ .compatible = "rohm,bd9573", .data = (void *)ROHM_CHIP_TYPE_BD9573, },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bd957x_of_match);
+
+static struct i2c_driver bd957x_drv = {
+	.driver = {
+		.name = "rohm-bd957x",
+		.of_match_table = bd957x_of_match,
+	},
+	.probe = &bd957x_i2c_probe,
+};
+module_i2c_driver(bd957x_drv);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("ROHM BD9576MUF and BD9573MUF Power Management IC driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/rohm-bd957x.h b/include/linux/mfd/rohm-bd957x.h
new file mode 100644
index 000000000000..3e7ca6fe5d4f
--- /dev/null
+++ b/include/linux/mfd/rohm-bd957x.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Copyright (C) 2020 ROHM Semiconductors */
+
+#ifndef __LINUX_MFD_BD957X_H__
+#define __LINUX_MFD_BD957X_H__
+
+enum {
+	BD957X_VD50,
+	BD957X_VD18,
+	BD957X_VDDDR,
+	BD957X_VD10,
+	BD957X_VOUTL1,
+	BD957X_VOUTS1,
+};
+
+#define BD957X_REG_SMRB_ASSERT		0x15
+#define BD957X_REG_PMIC_INTERNAL_STAT	0x20
+#define BD957X_REG_INT_THERM_STAT	0x23
+#define BD957X_REG_INT_THERM_MASK 0x24
+#define BD957X_REG_INT_OVP_STAT 0x25
+#define BD957X_REG_INT_SCP_STAT 0x26
+#define BD957X_REG_INT_OCP_STAT 0x27
+#define BD957X_REG_INT_OVD_STAT 0x28
+#define BD957X_REG_INT_UVD_STAT 0x29
+#define BD957X_REG_INT_UVP_STAT 0x2a
+#define BD957X_REG_INT_SYS_STAT 0x2b
+#define BD957X_REG_INT_SYS_MASK 0x2c
+#define BD957X_REG_INT_MAIN_STAT 0x30
+#define BD957X_REG_INT_MAIN_MASK 0x31
+
+#define BD957X_REG_WDT_CONF 0x16
+
+#define BD957X_REG_POW_TRIGGER1 0x41
+#define BD957X_REG_POW_TRIGGER2 0x42
+#define BD957X_REG_POW_TRIGGER3 0x43
+#define BD957X_REG_POW_TRIGGER4 0x44
+#define BD957X_REG_POW_TRIGGERL1 0x45
+#define BD957X_REG_POW_TRIGGERS1 0x46
+
+#define BD957X_REGULATOR_EN_MASK 0xff
+#define BD957X_REGULATOR_DIS_VAL 0xff
+
+#define BD957X_VSEL_REG_MASK	0xff
+
+#define BD957X_MASK_VOUT1_TUNE	0x87
+#define BD957X_MASK_VOUT2_TUNE	0x87
+#define BD957X_MASK_VOUT3_TUNE	0x1f
+#define BD957X_MASK_VOUT4_TUNE	0x1f
+#define BD957X_MASK_VOUTL1_TUNE	0x87
+
+#define BD957X_REG_VOUT1_TUNE	0x50
+#define BD957X_REG_VOUT2_TUNE	0x53
+#define BD957X_REG_VOUT3_TUNE	0x56
+#define BD957X_REG_VOUT4_TUNE	0x59
+#define BD957X_REG_VOUTL1_TUNE	0x5c
+
+#define BD957X_MAX_REGISTER 0x61
+
+#endif
diff --git a/include/linux/mfd/rohm-generic.h b/include/linux/mfd/rohm-generic.h
index 4283b5b33e04..58b4f1a0f4af 100644
--- a/include/linux/mfd/rohm-generic.h
+++ b/include/linux/mfd/rohm-generic.h
@@ -12,6 +12,8 @@ enum rohm_chip_type {
 	ROHM_CHIP_TYPE_BD71847,
 	ROHM_CHIP_TYPE_BD70528,
 	ROHM_CHIP_TYPE_BD71828,
+	ROHM_CHIP_TYPE_BD9576,
+	ROHM_CHIP_TYPE_BD9573,
 	ROHM_CHIP_TYPE_AMOUNT
 };
 
-- 
2.25.4


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =] 

  parent reply	other threads:[~2020-11-12  7:11 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-12  7:10 [PATCH v6 0/4] Support ROHM BD9576MUF and BD9573MUF PMICs Matti Vaittinen
2020-11-12  7:11 ` [PATCH v6 1/4] dt_bindings: mfd: Add " Matti Vaittinen
2020-11-12  7:11 ` Matti Vaittinen [this message]
2020-11-12  7:13 ` [PATCH v6 3/4] wdt: Support wdt on ROHM BD9576MUF and BD9573MUF Matti Vaittinen
2020-11-12  7:13 ` [PATCH v6 4/4] MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers Matti Vaittinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cc46e329efa30c66f000ab7c97f9bbf0bc31f0f7.1605164323.git.matti.vaittinen@fi.rohmeurope.com \
    --to=matti.vaittinen@fi.rohmeurope.com \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-power@fi.rohmeurope.com \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mazziesaccount@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.