From: Michal Simek <michal.simek@xilinx.com> To: linux-arm-kernel@lists.infradead.org, git@xilinx.com Cc: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>, Harini Katakam <harini.katakam@xilinx.com>, Mark Rutland <mark.rutland@arm.com>, Rajan Vaja <rajan.vaja@xilinx.com>, Rob Herring <robh+dt@kernel.org>, Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 3/7] arm64: zynqmp: Add label property to all ina226 on zcu111 Date: Thu, 9 Jan 2020 15:02:17 +0100 [thread overview] Message-ID: <cea6018dfc41c5704c24c14abcc383eee7d3b5aa.1578578535.git.michal.simek@xilinx.com> (raw) In-Reply-To: <cover.1578578535.git.michal.simek@xilinx.com> Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index df2bc5a41c8d..2e92634c77f9 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -212,84 +212,98 @@ i2c@0 { u67: ina226@40 { /* u67 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u67"; reg = <0x40>; shunt-resistor = <2000>; }; u59: ina226@41 { /* u59 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u59"; reg = <0x41>; shunt-resistor = <5000>; }; u61: ina226@42 { /* u61 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u61"; reg = <0x42>; shunt-resistor = <5000>; }; u60: ina226@43 { /* u60 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u60"; reg = <0x43>; shunt-resistor = <5000>; }; u64: ina226@45 { /* u64 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u64"; reg = <0x45>; shunt-resistor = <5000>; }; u69: ina226@46 { /* u69 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u69"; reg = <0x46>; shunt-resistor = <2000>; }; u66: ina226@47 { /* u66 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u66"; reg = <0x47>; shunt-resistor = <5000>; }; u65: ina226@48 { /* u65 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u65"; reg = <0x48>; shunt-resistor = <5000>; }; u63: ina226@49 { /* u63 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u63"; reg = <0x49>; shunt-resistor = <5000>; }; u3: ina226@4a { /* u3 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u3"; reg = <0x4a>; shunt-resistor = <5000>; }; u71: ina226@4b { /* u71 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u71"; reg = <0x4b>; shunt-resistor = <5000>; }; u77: ina226@4c { /* u77 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u77"; reg = <0x4c>; shunt-resistor = <5000>; }; u73: ina226@4d { /* u73 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u73"; reg = <0x4d>; shunt-resistor = <5000>; }; u79: ina226@4e { /* u79 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u79"; reg = <0x4e>; shunt-resistor = <5000>; }; -- 2.24.0
WARNING: multiple messages have this Message-ID (diff)
From: Michal Simek <michal.simek@xilinx.com> To: linux-arm-kernel@lists.infradead.org, git@xilinx.com Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>, Rajan Vaja <rajan.vaja@xilinx.com>, Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com>, linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Harini Katakam <harini.katakam@xilinx.com> Subject: [PATCH 3/7] arm64: zynqmp: Add label property to all ina226 on zcu111 Date: Thu, 9 Jan 2020 15:02:17 +0100 [thread overview] Message-ID: <cea6018dfc41c5704c24c14abcc383eee7d3b5aa.1578578535.git.michal.simek@xilinx.com> (raw) In-Reply-To: <cover.1578578535.git.michal.simek@xilinx.com> Label property is adding capability to distiguish chips from each other when iio framework is used. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index df2bc5a41c8d..2e92634c77f9 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -212,84 +212,98 @@ i2c@0 { u67: ina226@40 { /* u67 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u67"; reg = <0x40>; shunt-resistor = <2000>; }; u59: ina226@41 { /* u59 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u59"; reg = <0x41>; shunt-resistor = <5000>; }; u61: ina226@42 { /* u61 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u61"; reg = <0x42>; shunt-resistor = <5000>; }; u60: ina226@43 { /* u60 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u60"; reg = <0x43>; shunt-resistor = <5000>; }; u64: ina226@45 { /* u64 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u64"; reg = <0x45>; shunt-resistor = <5000>; }; u69: ina226@46 { /* u69 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u69"; reg = <0x46>; shunt-resistor = <2000>; }; u66: ina226@47 { /* u66 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u66"; reg = <0x47>; shunt-resistor = <5000>; }; u65: ina226@48 { /* u65 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u65"; reg = <0x48>; shunt-resistor = <5000>; }; u63: ina226@49 { /* u63 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u63"; reg = <0x49>; shunt-resistor = <5000>; }; u3: ina226@4a { /* u3 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u3"; reg = <0x4a>; shunt-resistor = <5000>; }; u71: ina226@4b { /* u71 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u71"; reg = <0x4b>; shunt-resistor = <5000>; }; u77: ina226@4c { /* u77 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u77"; reg = <0x4c>; shunt-resistor = <5000>; }; u73: ina226@4d { /* u73 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u73"; reg = <0x4d>; shunt-resistor = <5000>; }; u79: ina226@4e { /* u79 */ compatible = "ti,ina226"; #io-channel-cells = <1>; + label = "ina226-u79"; reg = <0x4e>; shunt-resistor = <5000>; }; -- 2.24.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-09 14:02 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-01-09 14:02 [PATCH 0/7] arm64: zynqmp: Enable iio-hwmon based on iio ina226 driver with labels Michal Simek 2020-01-09 14:02 ` Michal Simek 2020-01-09 14:02 ` [PATCH 1/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu100 Michal Simek 2020-01-09 14:02 ` Michal Simek 2020-01-09 14:02 ` [PATCH 2/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu111 Michal Simek 2020-01-09 14:02 ` Michal Simek 2020-01-09 14:02 ` Michal Simek [this message] 2020-01-09 14:02 ` [PATCH 3/7] arm64: zynqmp: Add label property to all " Michal Simek 2020-01-09 14:02 ` [PATCH 4/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu102 Michal Simek 2020-01-09 14:02 ` Michal Simek 2020-01-09 14:02 ` [PATCH 5/7] arm64: zynqmp: Add label property to all " Michal Simek 2020-01-09 14:02 ` Michal Simek 2020-01-09 14:02 ` [PATCH 6/7] arm64: zynqmp: Enable iio-hwmon for ina226 on zcu106 Michal Simek 2020-01-09 14:02 ` Michal Simek 2020-01-09 14:02 ` [PATCH 7/7] arm64: zynqmp: Add label property to all " Michal Simek 2020-01-09 14:02 ` Michal Simek 2020-01-21 9:50 ` [PATCH 0/7] arm64: zynqmp: Enable iio-hwmon based on iio ina226 driver with labels Michal Simek 2020-01-21 9:50 ` Michal Simek
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=cea6018dfc41c5704c24c14abcc383eee7d3b5aa.1578578535.git.michal.simek@xilinx.com \ --to=michal.simek@xilinx.com \ --cc=anurag.kumar.vulisha@xilinx.com \ --cc=devicetree@vger.kernel.org \ --cc=git@xilinx.com \ --cc=harini.katakam@xilinx.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=rajan.vaja@xilinx.com \ --cc=robh+dt@kernel.org \ --cc=venkatesh.abbarapu@xilinx.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.