From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH v2 00/10] arm64: renesas: Add support for R Car H3e 2G-and M3e-2G Date: Mon, 19 Jul 2021 17:38:31 +0200 [thread overview] Message-ID: <cover.1626708063.git.geert+renesas@glider.be> (raw) Hi all, The new R-Car Gen3e SoCs are different gradings of the existing R-Car Gen3 SoCs. This series adds support for the first two members of the family: R-Car H3e-2G (R8A779M1) and R-Car M3e-2G (R8A779M3), on the Salvator-XS and ULCB (with and without Kingfisher) development boards. Changes compared to v1[1]: - Add Reviewed-by, Acked-by. - Drop new fam_rcar_gen3e and soc_rcar_[hm]3e, just use the existing soc_rcar_{h3,m3_w}, - Drop pinctrl fix, which has evolved independently[2], - Drop mmc fix, which has been superseded by a recent refactoring[3], - Drop 2 GHz turbo modes, as the official opp-microvolt values are not yet available, - Widen the audience. This series has been tested on Salvator-X with R-Car H3 ES3.0 and Salvator-XS with R-Car M3-W+. For testing, a branch with dependencies and fixups to prototype R-Car Gen3e development on older Gen3 SoCs can be found at[4]. I plan to queue this in renesas-devel for v5.15. Thanks for your comments! [1] "[PATCH 00/14] arm64: renesas: Add support for R-Car H3e 2G-and M3e-2G" (https://lore.kernel.org/r/cover.1623315732.git.geert+renesas@glider.be/). [2] "[PATCH v2] pinctrl: renesas: Fix pin control matching on R-Car H3e-2G" (https://lore.kernel.org/r/6cdc5bfa424461105779b56f455387e03560cf66.1626707688.git.geert+renesas@glider.be) [3] "[PATCH v3] mmc: host: renesas_sdhi: Refactor renesas_sdhi_probe()" (https://lore.kernel.org/r/20210702112956.1065875-1-yoshihiro.shimoda.uh@renesas.com/) [2] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/rcar-gen3e-v2 Geert Uytterhoeven (10): dt-bindings: arm: renesas: Document R-Car H3e-2G and M3e-2G SoCs and boards soc: renesas: Identify R-Car H3e-2G and M3e-2G arm64: dts: renesas: Add Renesas R8A779M1 SoC support arm64: dts: renesas: Add Renesas R8A779M3 SoC support arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e-2G arm64: dts: renesas: Add support for H3ULCB with R-Car H3e-2G arm64: dts: renesas: Add support for H3ULCB+Kingfisher with R-Car H3e-2G arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e-2G arm64: dts: renesas: Add support for M3ULCB with R-Car M3e-2G arm64: dts: renesas: Add support for M3ULCB+Kingfisher with R-Car M3e-2G .../devicetree/bindings/arm/renesas.yaml | 50 +++++++++++++---- arch/arm64/boot/dts/renesas/Makefile | 8 +++ .../boot/dts/renesas/r8a779m1-salvator-xs.dts | 53 ++++++++++++++++++ .../boot/dts/renesas/r8a779m1-ulcb-kf.dts | 19 +++++++ arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts | 54 +++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a779m1.dtsi | 12 +++++ .../boot/dts/renesas/r8a779m3-salvator-xs.dts | 46 ++++++++++++++++ .../boot/dts/renesas/r8a779m3-ulcb-kf.dts | 18 +++++++ arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts | 45 ++++++++++++++++ arch/arm64/boot/dts/renesas/r8a779m3.dtsi | 12 +++++ drivers/soc/renesas/Kconfig | 2 + drivers/soc/renesas/renesas-soc.c | 4 ++ 12 files changed, 312 insertions(+), 11 deletions(-) create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1.dtsi create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3.dtsi -- 2.25.1 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH v2 00/10] arm64: renesas: Add support for R Car H3e 2G-and M3e-2G Date: Mon, 19 Jul 2021 17:38:31 +0200 [thread overview] Message-ID: <cover.1626708063.git.geert+renesas@glider.be> (raw) Hi all, The new R-Car Gen3e SoCs are different gradings of the existing R-Car Gen3 SoCs. This series adds support for the first two members of the family: R-Car H3e-2G (R8A779M1) and R-Car M3e-2G (R8A779M3), on the Salvator-XS and ULCB (with and without Kingfisher) development boards. Changes compared to v1[1]: - Add Reviewed-by, Acked-by. - Drop new fam_rcar_gen3e and soc_rcar_[hm]3e, just use the existing soc_rcar_{h3,m3_w}, - Drop pinctrl fix, which has evolved independently[2], - Drop mmc fix, which has been superseded by a recent refactoring[3], - Drop 2 GHz turbo modes, as the official opp-microvolt values are not yet available, - Widen the audience. This series has been tested on Salvator-X with R-Car H3 ES3.0 and Salvator-XS with R-Car M3-W+. For testing, a branch with dependencies and fixups to prototype R-Car Gen3e development on older Gen3 SoCs can be found at[4]. I plan to queue this in renesas-devel for v5.15. Thanks for your comments! [1] "[PATCH 00/14] arm64: renesas: Add support for R-Car H3e 2G-and M3e-2G" (https://lore.kernel.org/r/cover.1623315732.git.geert+renesas@glider.be/). [2] "[PATCH v2] pinctrl: renesas: Fix pin control matching on R-Car H3e-2G" (https://lore.kernel.org/r/6cdc5bfa424461105779b56f455387e03560cf66.1626707688.git.geert+renesas@glider.be) [3] "[PATCH v3] mmc: host: renesas_sdhi: Refactor renesas_sdhi_probe()" (https://lore.kernel.org/r/20210702112956.1065875-1-yoshihiro.shimoda.uh@renesas.com/) [2] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/rcar-gen3e-v2 Geert Uytterhoeven (10): dt-bindings: arm: renesas: Document R-Car H3e-2G and M3e-2G SoCs and boards soc: renesas: Identify R-Car H3e-2G and M3e-2G arm64: dts: renesas: Add Renesas R8A779M1 SoC support arm64: dts: renesas: Add Renesas R8A779M3 SoC support arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e-2G arm64: dts: renesas: Add support for H3ULCB with R-Car H3e-2G arm64: dts: renesas: Add support for H3ULCB+Kingfisher with R-Car H3e-2G arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e-2G arm64: dts: renesas: Add support for M3ULCB with R-Car M3e-2G arm64: dts: renesas: Add support for M3ULCB+Kingfisher with R-Car M3e-2G .../devicetree/bindings/arm/renesas.yaml | 50 +++++++++++++---- arch/arm64/boot/dts/renesas/Makefile | 8 +++ .../boot/dts/renesas/r8a779m1-salvator-xs.dts | 53 ++++++++++++++++++ .../boot/dts/renesas/r8a779m1-ulcb-kf.dts | 19 +++++++ arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts | 54 +++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a779m1.dtsi | 12 +++++ .../boot/dts/renesas/r8a779m3-salvator-xs.dts | 46 ++++++++++++++++ .../boot/dts/renesas/r8a779m3-ulcb-kf.dts | 18 +++++++ arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts | 45 ++++++++++++++++ arch/arm64/boot/dts/renesas/r8a779m3.dtsi | 12 +++++ drivers/soc/renesas/Kconfig | 2 + drivers/soc/renesas/renesas-soc.c | 4 ++ 12 files changed, 312 insertions(+), 11 deletions(-) create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1-salvator-xs.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1-ulcb-kf.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1-ulcb.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a779m1.dtsi create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3-ulcb-kf.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3-ulcb.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3.dtsi -- 2.25.1 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-07-19 15:58 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-19 15:38 Geert Uytterhoeven [this message] 2021-07-19 15:38 ` [PATCH v2 00/10] arm64: renesas: Add support for R Car H3e 2G-and M3e-2G Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 01/10] dt-bindings: arm: renesas: Document R-Car H3e-2G and M3e-2G SoCs and boards Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 02/10] soc: renesas: Identify R-Car H3e-2G and M3e-2G Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 03/10] arm64: dts: renesas: Add Renesas R8A779M1 SoC support Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 04/10] arm64: dts: renesas: Add Renesas R8A779M3 " Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 05/10] arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e-2G Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 06/10] arm64: dts: renesas: Add support for H3ULCB " Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 07/10] arm64: dts: renesas: Add support for H3ULCB+Kingfisher " Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 08/10] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e-2G Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 09/10] arm64: dts: renesas: Add support for M3ULCB " Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven 2021-07-19 15:38 ` [PATCH v2 10/10] arm64: dts: renesas: Add support for M3ULCB+Kingfisher " Geert Uytterhoeven 2021-07-19 15:38 ` Geert Uytterhoeven
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=cover.1626708063.git.geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.