From: Christophe Leroy <christophe.leroy@csgroup.eu> To: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Paul Mackerras <paulus@samba.org>, Michael Ellerman <mpe@ellerman.id.au>, alex@ghiti.fr Cc: Christophe Leroy <christophe.leroy@csgroup.eu>, linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org, linux-mm@kvack.org Subject: [PATCH v3 00/10] Convert powerpc to default topdown mmap layout Date: Mon, 29 Nov 2021 15:19:14 +0100 [thread overview] Message-ID: <cover.1638195388.git.christophe.leroy@csgroup.eu> (raw) Rebased on top of Nic's v5 series "powerpc: Make hash MMU code build configurable" This series converts powerpc to default topdown mmap layout. powerpc provides its own arch_get_unmapped_area() only when slices are needed, which is only for book3s/64. First part of the series moves slices into book3s/64 specific directories and cleans up other subarchitectures. Then a small modification is done to core mm to allow powerpc to still provide its own arch_randomize_brk() Last part converts to default topdown mmap layout. Changes in v3: - Fixed missing <linux/elf-randomize.h> in last patch - Added a patch to move SZ_1T out of drivers/pci/controller/pci-xgene.c Changes in v2: - Moved patch 4 before patch 2 - Make generic arch_randomize_brk() __weak - Added patch 9 Christophe Leroy (10): powerpc/mm: Make slice specific to book3s/64 powerpc/mm: Move vma_mmu_pagesize() and hugetlb_get_unmapped_area() to slice.c powerpc/mm: Remove CONFIG_PPC_MM_SLICES powerpc/mm: Remove asm/slice.h powerpc/mm: Call radix__arch_get_unmapped_area() from arch_get_unmapped_area() mm: Allow arch specific arch_randomize_brk() with CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT powerpc/mm: Convert to default topdown mmap layout powerpc/mm: Properly randomise mmap with slices sizes.h: Add SZ_1T macro powerpc: Simplify and move arch_randomize_brk() arch/powerpc/Kconfig | 2 +- arch/powerpc/include/asm/book3s/64/hash.h | 7 +- arch/powerpc/include/asm/book3s/64/hugetlb.h | 4 - arch/powerpc/include/asm/book3s/64/mmu-hash.h | 1 + arch/powerpc/include/asm/book3s/64/slice.h | 18 ++ arch/powerpc/include/asm/hugetlb.h | 2 +- arch/powerpc/include/asm/paca.h | 7 - arch/powerpc/include/asm/page.h | 1 - arch/powerpc/include/asm/processor.h | 2 - arch/powerpc/include/asm/slice.h | 46 ---- arch/powerpc/kernel/paca.c | 5 - arch/powerpc/kernel/process.c | 41 ---- arch/powerpc/mm/Makefile | 3 +- arch/powerpc/mm/book3s64/Makefile | 2 +- arch/powerpc/mm/book3s64/hash_utils.c | 33 +-- arch/powerpc/mm/book3s64/radix_hugetlbpage.c | 55 ----- arch/powerpc/mm/{ => book3s64}/slice.c | 200 ++++++++++++++- arch/powerpc/mm/hugetlbpage.c | 28 --- arch/powerpc/mm/mmap.c | 228 ------------------ arch/powerpc/mm/nohash/mmu_context.c | 9 - arch/powerpc/mm/nohash/tlb.c | 4 - arch/powerpc/platforms/Kconfig.cputype | 4 - drivers/pci/controller/pci-xgene.c | 1 - include/linux/sizes.h | 2 + mm/util.c | 2 +- 25 files changed, 237 insertions(+), 470 deletions(-) delete mode 100644 arch/powerpc/include/asm/slice.h rename arch/powerpc/mm/{ => book3s64}/slice.c (80%) delete mode 100644 arch/powerpc/mm/mmap.c -- 2.33.1
WARNING: multiple messages have this Message-ID (diff)
From: Christophe Leroy <christophe.leroy@csgroup.eu> To: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Paul Mackerras <paulus@samba.org>, Michael Ellerman <mpe@ellerman.id.au>, alex@ghiti.fr Cc: linux-mm@kvack.org, linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org Subject: [PATCH v3 00/10] Convert powerpc to default topdown mmap layout Date: Mon, 29 Nov 2021 15:19:14 +0100 [thread overview] Message-ID: <cover.1638195388.git.christophe.leroy@csgroup.eu> (raw) Rebased on top of Nic's v5 series "powerpc: Make hash MMU code build configurable" This series converts powerpc to default topdown mmap layout. powerpc provides its own arch_get_unmapped_area() only when slices are needed, which is only for book3s/64. First part of the series moves slices into book3s/64 specific directories and cleans up other subarchitectures. Then a small modification is done to core mm to allow powerpc to still provide its own arch_randomize_brk() Last part converts to default topdown mmap layout. Changes in v3: - Fixed missing <linux/elf-randomize.h> in last patch - Added a patch to move SZ_1T out of drivers/pci/controller/pci-xgene.c Changes in v2: - Moved patch 4 before patch 2 - Make generic arch_randomize_brk() __weak - Added patch 9 Christophe Leroy (10): powerpc/mm: Make slice specific to book3s/64 powerpc/mm: Move vma_mmu_pagesize() and hugetlb_get_unmapped_area() to slice.c powerpc/mm: Remove CONFIG_PPC_MM_SLICES powerpc/mm: Remove asm/slice.h powerpc/mm: Call radix__arch_get_unmapped_area() from arch_get_unmapped_area() mm: Allow arch specific arch_randomize_brk() with CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT powerpc/mm: Convert to default topdown mmap layout powerpc/mm: Properly randomise mmap with slices sizes.h: Add SZ_1T macro powerpc: Simplify and move arch_randomize_brk() arch/powerpc/Kconfig | 2 +- arch/powerpc/include/asm/book3s/64/hash.h | 7 +- arch/powerpc/include/asm/book3s/64/hugetlb.h | 4 - arch/powerpc/include/asm/book3s/64/mmu-hash.h | 1 + arch/powerpc/include/asm/book3s/64/slice.h | 18 ++ arch/powerpc/include/asm/hugetlb.h | 2 +- arch/powerpc/include/asm/paca.h | 7 - arch/powerpc/include/asm/page.h | 1 - arch/powerpc/include/asm/processor.h | 2 - arch/powerpc/include/asm/slice.h | 46 ---- arch/powerpc/kernel/paca.c | 5 - arch/powerpc/kernel/process.c | 41 ---- arch/powerpc/mm/Makefile | 3 +- arch/powerpc/mm/book3s64/Makefile | 2 +- arch/powerpc/mm/book3s64/hash_utils.c | 33 +-- arch/powerpc/mm/book3s64/radix_hugetlbpage.c | 55 ----- arch/powerpc/mm/{ => book3s64}/slice.c | 200 ++++++++++++++- arch/powerpc/mm/hugetlbpage.c | 28 --- arch/powerpc/mm/mmap.c | 228 ------------------ arch/powerpc/mm/nohash/mmu_context.c | 9 - arch/powerpc/mm/nohash/tlb.c | 4 - arch/powerpc/platforms/Kconfig.cputype | 4 - drivers/pci/controller/pci-xgene.c | 1 - include/linux/sizes.h | 2 + mm/util.c | 2 +- 25 files changed, 237 insertions(+), 470 deletions(-) delete mode 100644 arch/powerpc/include/asm/slice.h rename arch/powerpc/mm/{ => book3s64}/slice.c (80%) delete mode 100644 arch/powerpc/mm/mmap.c -- 2.33.1
next reply other threads:[~2021-11-29 14:35 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-11-29 14:19 Christophe Leroy [this message] 2021-11-29 14:19 ` [PATCH v3 00/10] Convert powerpc to default topdown mmap layout Christophe Leroy 2021-11-29 14:19 ` [PATCH v3 01/10] powerpc/mm: Make slice specific to book3s/64 Christophe Leroy 2021-11-29 14:19 ` Christophe Leroy 2021-11-29 14:19 ` [PATCH v3 02/10] powerpc/mm: Move vma_mmu_pagesize() and hugetlb_get_unmapped_area() to slice.c Christophe Leroy 2021-11-29 14:19 ` Christophe Leroy 2021-11-29 14:19 ` [PATCH v3 03/10] powerpc/mm: Remove CONFIG_PPC_MM_SLICES Christophe Leroy 2021-11-29 14:19 ` Christophe Leroy 2021-11-29 14:19 ` [PATCH v3 04/10] powerpc/mm: Remove asm/slice.h Christophe Leroy 2021-11-29 14:19 ` Christophe Leroy 2021-11-29 14:19 ` [PATCH v3 05/10] powerpc/mm: Call radix__arch_get_unmapped_area() from arch_get_unmapped_area() Christophe Leroy 2021-11-29 14:19 ` Christophe Leroy 2021-11-29 14:19 ` [PATCH v3 06/10] mm: Allow arch specific arch_randomize_brk() with CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT Christophe Leroy 2021-11-29 14:19 ` Christophe Leroy 2021-11-29 14:19 ` [PATCH v3 07/10] powerpc/mm: Convert to default topdown mmap layout Christophe Leroy 2021-11-29 14:19 ` Christophe Leroy 2021-11-29 14:19 ` [PATCH v3 08/10] powerpc/mm: Properly randomise mmap with slices Christophe Leroy 2021-11-29 14:19 ` Christophe Leroy 2021-11-29 14:19 ` [PATCH v3 09/10] sizes.h: Add SZ_1T macro Christophe Leroy 2021-11-29 14:19 ` Christophe Leroy 2021-11-29 14:19 ` [PATCH v3 10/10] powerpc: Simplify and move arch_randomize_brk() Christophe Leroy 2021-11-29 14:19 ` Christophe Leroy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=cover.1638195388.git.christophe.leroy@csgroup.eu \ --to=christophe.leroy@csgroup.eu \ --cc=alex@ghiti.fr \ --cc=benh@kernel.crashing.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mm@kvack.org \ --cc=linuxppc-dev@lists.ozlabs.org \ --cc=mpe@ellerman.id.au \ --cc=paulus@samba.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.